Steering wheel removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CRRoy71 · 04-05-2003, 07:38 AM

Ok, so I pulled the wheel, and there is a cover that needs to come off. But there is that lock ring on there that has to come off.
How do you get that little lock ring off without the "tool".

apstguy · 04-05-2003, 12:31 PM

I think you have to get a specific tool for that. Kragen or Autozone has it and may have one you can rent.

DRASTiK · 04-05-2003, 06:04 PM

I just went through that headache a few days ago. I was able to muscle the ring off by pushing on it and removing the ring with some snap ring pliers, but wound up hauling butt to the parts store before they closed, because there was NO WAY of putting the ring back in without the tool. I just rented one from autozone for 15 bucks and got my money back when I returned it. It made it sooooo much easier. I fought it for an hour without the tool.

Once I rented it, it took me a total of 30 seconds to put the ring back on.

Dave

**old Rusty C10** · 04-05-2003, 09:36 PM

its easy enough to make the tool too with apiece of flat stock steel a drillpress and couple of bolts

apstguy · 04-05-2003, 10:26 PM

Bob - your thinking of a steering wheel puller. This lock ring is a little different. It's a plate. It gets pulled off by a tool that has two long forks and a center screw.

Blue Beard · 04-05-2003, 10:55 PM

The plate being referred to is a anti theft device that locks the steering wheel when the key is off.

Some vehicle have a very strong spring under those that can cause injury.

Rent or borrow the right tool, you won't be sorry.....

CRRoy71 · 04-05-2003, 11:26 PM

Thanks everyone for the advice, I think I will go get the tool.

04-05-2003, 07:38 AM	#1
CRRoy71 Registered User Join Date: Feb 2003 Location: Mont Belvieu, TX Posts: 852	Steering wheel removal Ok, so I pulled the wheel, and there is a cover that needs to come off. But there is that lock ring on there that has to come off. How do you get that little lock ring off without the "tool". __________________ Chris '92 ext. cab s/b 4.3L "Sparky" '04 crew cab 2500 4x4 6.0L

04-05-2003, 12:31 PM	#2
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	I think you have to get a specific tool for that. Kragen or Autozone has it and may have one you can rent. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

04-05-2003, 06:04 PM	#3
DRASTiK Converted Ford guy Join Date: Nov 2002 Location: Yuma, AZ Posts: 67	I just went through that headache a few days ago. I was able to muscle the ring off by pushing on it and removing the ring with some snap ring pliers, but wound up hauling butt to the parts store before they closed, because there was NO WAY of putting the ring back in without the tool. I just rented one from autozone for 15 bucks and got my money back when I returned it. It made it sooooo much easier. I fought it for an hour without the tool. Once I rented it, it took me a total of 30 seconds to put the ring back on. Dave __________________ 84 Suburban Silverado 4X4, 4" lift, flowmaster exhaust Marine Corps vet -- SEMPER FI Rice Haters Club Member #75

04-05-2003, 09:36 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,280	its easy enough to make the tool too with apiece of flat stock steel a drillpress and couple of bolts __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-05-2003, 10:26 PM	#5
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	Bob - your thinking of a steering wheel puller. This lock ring is a little different. It's a plate. It gets pulled off by a tool that has two long forks and a center screw. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

04-05-2003, 10:55 PM	#6
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	The plate being referred to is a anti theft device that locks the steering wheel when the key is off. Some vehicle have a very strong spring under those that can cause injury. Rent or borrow the right tool, you won't be sorry..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-05-2003, 11:26 PM	#7
CRRoy71 Registered User Join Date: Feb 2003 Location: Mont Belvieu, TX Posts: 852	Thanks everyone for the advice, I think I will go get the tool. __________________ Chris '92 ext. cab s/b 4.3L "Sparky" '04 crew cab 2500 4x4 6.0L



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.