Sending the twins to summer camp tomorrow - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pritch · 07-26-2011, 09:48 PM

Summer camp at the Machine Shop, that is, and they should have a whole new attitude when they get back home

First, I need to get them cleaned up and inspected, then make more decisions. I need a motor to continue my Panel build. My plan is to quickly build one more or less stock to put in the Panel, and then take my time and build the other to the high-performance motor that will go in the Panel when it's done. Then I'll take the stock one and put it in my '68 pick-up, my DD.

68 IRON · 07-26-2011, 10:12 PM

Yep, I'm gonna follow this one. Show us the pics after they get cleaned up.
What process will they use to clean them? Are the heads goin' too?

68panelman · 07-26-2011, 10:32 PM

Watchin this one too!!

bruceman1968 · 07-26-2011, 10:50 PM

Pritch, I'm in to. Grab the casting number and date code off the XAE block, before you drop them off, if you can.

pritch · 07-27-2011, 07:52 PM

Bruceman68, I should have got those casting numbers, but I didn't. I'll get them next time I see the blocks. They'll be a lot easier to see then, anyway

68 Iron, I don't know how this guy cleans them, but I've had several done by him and however he does it, it works!

I'm excited to get going on this stage of the project. I've wasted enough time already. All I sent down this time was the 2 cranks. I still want to take one more trip to the wrecking yards to see if I can find a 194 head. I have several heads to choose from-I also want to make sure this machinist is comfortable with installing the lumps in the ports. I'm sure he can do it, but I don't want mine to be the first one he does. Defiantly the hardened valves, and probably larger valves, too, at least on the one that will be naturally aspirated. Not sure if that's necessary on the one that will get the blower.

68 IRON · 07-27-2011, 09:46 PM

Is a 194 head from a 292? I'm still learning about these 6's. Last year we bought our 68 with a 6 and its been great fun learning and playin' with it. I want to build a nice solid 6 in the future....so I'm gonna watch Pritch.
Oh ya, I have a 292 I'm waitin to hear back on....what about the head?

Hubscrub · 07-27-2011, 10:12 PM

Nutin finer than an in liner except two! love it

07-26-2011, 09:48 PM	#1
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Sending the twins to summer camp tomorrow Summer camp at the Machine Shop, that is, and they should have a whole new attitude when they get back home First, I need to get them cleaned up and inspected, then make more decisions. I need a motor to continue my Panel build. My plan is to quickly build one more or less stock to put in the Panel, and then take my time and build the other to the high-performance motor that will go in the Panel when it's done. Then I'll take the stock one and put it in my '68 pick-up, my DD. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

07-26-2011, 10:12 PM	#2
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Sending the twins to summer camp tomorrow Yep, I'm gonna follow this one. Show us the pics after they get cleaned up. What process will they use to clean them? Are the heads goin' too?

07-26-2011, 10:32 PM	#3
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: Sending the twins to summer camp tomorrow Watchin this one too!!

07-26-2011, 10:50 PM	#4
bruceman1968 Registered User Join Date: Oct 2009 Location: Tampa Bay Posts: 1,549	Re: Sending the twins to summer camp tomorrow Pritch, I'm in to. Grab the casting number and date code off the XAE block, before you drop them off, if you can. __________________ CHEVY/GMC VIN DECODERS

07-27-2011, 07:52 PM	#5
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Sending the twins to summer camp tomorrow Bruceman68, I should have got those casting numbers, but I didn't. I'll get them next time I see the blocks. They'll be a lot easier to see then, anyway 68 Iron, I don't know how this guy cleans them, but I've had several done by him and however he does it, it works! I'm excited to get going on this stage of the project. I've wasted enough time already. All I sent down this time was the 2 cranks. I still want to take one more trip to the wrecking yards to see if I can find a 194 head. I have several heads to choose from-I also want to make sure this machinist is comfortable with installing the lumps in the ports. I'm sure he can do it, but I don't want mine to be the first one he does. Defiantly the hardened valves, and probably larger valves, too, at least on the one that will be naturally aspirated. Not sure if that's necessary on the one that will get the blower. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

07-27-2011, 09:46 PM	#6
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Sending the twins to summer camp tomorrow Is a 194 head from a 292? I'm still learning about these 6's. Last year we bought our 68 with a 6 and its been great fun learning and playin' with it. I want to build a nice solid 6 in the future....so I'm gonna watch Pritch. Oh ya, I have a 292 I'm waitin to hear back on....what about the head?

07-27-2011, 10:12 PM	#7
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Sending the twins to summer camp tomorrow Nutin finer than an in liner except two! love it __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.