A little bit of info I wish I would have known. :( - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rchavez101 · 07-30-2011, 06:51 PM

This past weekend I lowered my 94 by using spindles and 2" springs. I took it in for an alignment but found that I was suppose to punch out the tabs on the UCA for the alignment. Once I remove the tabs do I have to buy some special bolt for the cam kit or what do I need in order for the shop to do the alignment. If you have link to the kit assuming I need one please include the link with your reply. Oh well I guess its another small bump in the road.

07-30-2011, 06:51 PM	#1
rchavez101 Registered User Join Date: Jun 2011 Location: Rio Rancho NM Posts: 503	A little bit of info I wish I would have known. :( This past weekend I lowered my 94 by using spindles and 2" springs. I took it in for an alignment but found that I was suppose to punch out the tabs on the UCA for the alignment. Once I remove the tabs do I have to buy some special bolt for the cam kit or what do I need in order for the shop to do the alignment. If you have link to the kit assuming I need one please include the link with your reply. Oh well I guess its another small bump in the road.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.