CA 71 SWB Frame FS $400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dano69c10 · 08-01-2011, 01:35 PM

I have a '71 SWB frame in my storage unit that I need to sell, $400.00.

- It has bolt-in, c-notches installed.

- Powdercoat black, but there are scratches and scrapes to the finish.

- Rear Shock mount brackets were removed (but included), but I suppose you'd need shock relocators anyway.

- Last crossmember where taillight harness attaches is removed (but included).

- Exhaust cut-outs through the trailing arm crossmember.

This is local pick-up, I will not ship. You'll need a trailer or at the very least a longbed truck.

An "I'll take it" or "I'll take it pending pics" will get you a place in line, questions and comments won't.

Please reply in thread.

I will try to post pics on Tuesday when I head down to my storage unit.

Thanx Dano

budnikguy · 08-02-2011, 12:28 AM

I will take it pending detailed pictures!

Dano69c10 · 08-02-2011, 03:40 PM

****Correction to original post; the c-notches are "bolt-in" not "welded"****

Here's some pics, let me know if you want a certain part of the frame photographed. Frame is really dusty, not rusty.

budnikguy · 08-02-2011, 04:27 PM

no tweaks, bends, frame damage?! Both front and rear fame horns look good? looks pretty good in pics! only need your word, more pics not necessary. any chance you have a 5 lug rearend to go with?

Dano69c10 · 08-02-2011, 04:59 PM

Quote:

Originally Posted by budnikguy

no tweaks, bends, frame damage?! Both front and rear fame horns look good? looks pretty good in pics! only need your word, more pics not necessary. any chance you have a 5 lug rearend to go with?

No on the tweaks or bends, but I did find a hole that looks like it was made by a torch, I can post a pic later. Horns look good, but the front horn tips have a little surface rust as shown in the pics, I don't know why the po didn't powdercoat the tips. Sorry no 5 lug rear ends.

I really wanted to keep this one for me, but my '70 project is all I can handle.
I'd rather someone put it to use, then have it sitting in my storage unit.

Dano

budnikguy · 08-02-2011, 09:30 PM

where is the torched hole at? pic would be cool...

Dano69c10 · 08-04-2011, 07:22 PM

budnikguy
Here's a pic of the torched hole. It's right in front of the front crossmember. I don't know what that hole is used for.

**leddzepp** · 08-04-2011, 08:02 PM

I think it is the mounting hole for the front bumper bracket (need to check my truck). Passenger side, correct?

Dano69c10 · 08-04-2011, 08:50 PM

Quote:

Originally Posted by leddzepp

I think it is the mounting hole for the front bumper bracket (need to check my truck). Passenger side, correct?

Yes it's the passenger side

Dano69c10 · 08-05-2011, 12:20 AM

If budnikguy does not take it, then I'm going to keep this one to build off. All of the hard work has been done. I don't feel like starting all over with another frame, cleaning and painting. Just waitin' on budnikguy's word.
Thank You
Dano

Albertabound · 08-14-2011, 08:59 PM

I am restoring a 62 panel and I need a swb frame off 67-72 so I'm very interested
Is it still available
thanks
Harry

Dano69c10 · 09-23-2011, 01:36 PM

sale pending w/ Budnikguy...

Dano69c10 · 05-02-2012, 04:35 PM

sold!

DesertCat · 05-02-2012, 04:50 PM

Quote:

Originally Posted by Dano69c10

sold!

Dang it, already?

08-01-2011, 01:35 PM	#1
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	71 SWB Frame FS $400 I have a '71 SWB frame in my storage unit that I need to sell, $400.00. - It has bolt-in, c-notches installed. - Powdercoat black, but there are scratches and scrapes to the finish. - Rear Shock mount brackets were removed (but included), but I suppose you'd need shock relocators anyway. - Last crossmember where taillight harness attaches is removed (but included). - Exhaust cut-outs through the trailing arm crossmember. This is local pick-up, I will not ship. You'll need a trailer or at the very least a longbed truck. An "I'll take it" or "I'll take it pending pics" will get you a place in line, questions and comments won't. Please reply in thread. I will try to post pics on Tuesday when I head down to my storage unit. Thanx Dano __________________ '69 Fleet It ain't yours, if you didn't build it! Last edited by Dano69c10; 08-02-2011 at 03:43 PM.

08-02-2011, 12:28 AM	#2
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 71 SWB Frame FS $400 I will take it pending detailed pictures!

08-02-2011, 03:40 PM	#3
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 71 SWB Frame FS $400 **Correction to original post; the c-notches are "bolt-in" not "welded"** Here's some pics, let me know if you want a certain part of the frame photographed. Frame is really dusty, not rusty. __________________ '69 Fleet It ain't yours, if you didn't build it! Last edited by Dano69c10; 08-02-2011 at 03:49 PM.

08-02-2011, 04:27 PM	#4
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 71 SWB Frame FS $400 no tweaks, bends, frame damage?! Both front and rear fame horns look good? looks pretty good in pics! only need your word, more pics not necessary. any chance you have a 5 lug rearend to go with?

08-02-2011, 09:30 PM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 71 SWB Frame FS $400 where is the torched hole at? pic would be cool...

08-04-2011, 07:22 PM	#7
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 71 SWB Frame FS $400 budnikguy Here's a pic of the torched hole. It's right in front of the front crossmember. I don't know what that hole is used for. __________________ '69 Fleet It ain't yours, if you didn't build it!

08-04-2011, 08:02 PM	#8
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: 71 SWB Frame FS $400 I think it is the mounting hole for the front bumper bracket (need to check my truck). Passenger side, correct? __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

08-05-2011, 12:20 AM	#10
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 71 SWB Frame FS $400 If budnikguy does not take it, then I'm going to keep this one to build off. All of the hard work has been done. I don't feel like starting all over with another frame, cleaning and painting. Just waitin' on budnikguy's word. Thank You Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

08-14-2011, 08:59 PM	#11
Albertabound Registered User Join Date: Aug 2011 Location: Calgary, Alberta Posts: 4	Re: 71 SWB Frame FS $400 I am restoring a 62 panel and I need a swb frame off 67-72 so I'm very interested Is it still available thanks Harry

09-23-2011, 01:36 PM	#12
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 71 SWB Frame FS $400 sale pending w/ Budnikguy... __________________ '69 Fleet It ain't yours, if you didn't build it!

05-02-2012, 04:35 PM	#13
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 71 SWB Frame FS $400 sold! __________________ '69 Fleet It ain't yours, if you didn't build it!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.