4 speed tilt interchange??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968vetL-71 · 08-07-2011, 10:57 PM

Hey everyone. I am looking for a 4 spd tilt column for my 79 and I just want to make sure that anything from 73-82 will work correct? 83-up had the wipers/dimmer on column? Was the wiring correct from 73-82 also?

Any help in advance would be greatly appreciated.

Thanks!!

Matthew

1968vetL-71 · 08-07-2011, 10:59 PM

Hmmm.. my bad!

this was supposed to be posted in 73-up board. Can someone move this thread for me please?

Thanks a bunch!!

71swb4x4 · 08-07-2011, 11:00 PM

I can't tell you, but you will probably get a better response in the 73-87 parts board. You posted on the 67-72 parts board.

71swb4x4 · 08-07-2011, 11:00 PM

PM one of the mods of this section:
dan42, Luis_gz06, ETsC10, msgross, 70cst, Jerry Jones, VA72C10, 72BlckButy, leddzepp, gcburdic

VA72C10 · 08-08-2011, 01:39 AM

moved per your request to the 73-87 gen discussion so you can get some input

**old Rusty C10** · 08-08-2011, 08:09 AM

just to clarify youre just asking about interchange or is this a want to buy also ( you are a site supporter so you can post a wtb , i just want to make sure that youre in the right section)

**hatzie** · 08-08-2011, 08:23 AM

Look at posts 15 & 17 in this thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=322709

1968vetL-71 · 08-08-2011, 09:41 AM

Thanks hatzie! Thats what I needed to know. I will probably put a wtb out on the parts board and see whats out there.

Thanks again!!

08-07-2011, 10:57 PM	#1
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	4 speed tilt interchange??? Hey everyone. I am looking for a 4 spd tilt column for my 79 and I just want to make sure that anything from 73-82 will work correct? 83-up had the wipers/dimmer on column? Was the wiring correct from 73-82 also? Any help in advance would be greatly appreciated. Thanks!! Matthew __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

08-07-2011, 10:59 PM	#2
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4 speed tilt Hmmm.. my bad! this was supposed to be posted in 73-up board. Can someone move this thread for me please? Thanks a bunch!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

08-07-2011, 11:00 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: 4 speed tilt I can't tell you, but you will probably get a better response in the 73-87 parts board. You posted on the 67-72 parts board. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-07-2011, 11:00 PM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: 4 speed tilt PM one of the mods of this section: dan42, Luis_gz06, ETsC10, msgross, 70cst, Jerry Jones, VA72C10, 72BlckButy, leddzepp, gcburdic __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-08-2011, 01:39 AM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 4 speed tilt interchange??? moved per your request to the 73-87 gen discussion so you can get some input __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-08-2011, 08:09 AM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: 4 speed tilt interchange??? just to clarify youre just asking about interchange or is this a want to buy also ( you are a site supporter so you can post a wtb , i just want to make sure that youre in the right section) __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

08-08-2011, 08:23 AM	#7
hatzie Moderator Join Date: Oct 2008 Location: Wentworth, NH Posts: 4,977	Re: 4 speed tilt interchange??? Look at posts 15 & 17 in this thread... http://67-72chevytrucks.com/vboard/s...d.php?t=322709

08-08-2011, 09:41 AM	#8
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: 4 speed tilt interchange??? Thanks hatzie! Thats what I needed to know. I will probably put a wtb out on the parts board and see whats out there. Thanks again!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.