84 k10 GMC swb, "Big Red"

[grayharville]

Well I decided its time for a new project!

Ever since I was little I wanted a Swb chevy, lifted huge. After recently selling my cummins dodge, I decided id have what I always wanted.

After a craigslist search, I ran across an 84 gmc k10, that looked rough in the poor pictures. After speaking on the phone with the guy, we agreed on a price and I set off to go get it, 160 miles away. Upon arrival I realized I had struck gold!

Although it had a spray bomb primer paint job, it had absolutely zero rust, and 78,xxx miles! After exchanging money I drove off, the truck made the journey home without a hitch.

After doing some research I found that the truck was bought by a ranch in arlington, then was bought last year and moved to waco.

My plans are a red paint job, black interior, 10 inch lift, rolling on 38x15.5 swamper radials.

Here's pics of the truck when I got it









Im now lookin for a ten inch lift, anyone got one?

Also, what would You give for this truck? What's it worth?

Enjoy
Posted via Mobile Device

[dabels23]

There is a 12" lift in the classifieds? 2" more inches always helps if you get in a deep hole.

[grayharville]

I saw that but I think my angles are gonna be bad enough with a 10 lol
Posted via Mobile Device

[Walts_restoration]

those 10 bolts are gonna cry all night long after looking at those 38s....


You might look into a 3/4 ton swap, at minimum a 6 lug semifloating 14 bolt...

[grayharville]

Originally Posted by Walts_restoration

those 10 bolts are gonna cry all night long after looking at those 38s....


You might look into a 3/4 ton swap, at minimum a 6 lug semifloating 14 bolt...

I plan on taking it easy with the 10 bolts, ill upgrade gearing and axles when money permits, right now I just want to get it up in the air so I stay interested!
Posted via Mobile Device

[Walts_restoration]

mall crawling they should be fine for a while, depending on gearing it might be a dog off the line though! Goodluck. Project sounds interesting.

[grayharville]

For right now it'll be a chick magnet/pretty truck. Later it will evolve.

I found a NTWonline suspension special that looked decent, springs shocks and hardware for around 800. I know ill need brake lines but what about steering? Can I go with a dropped arm until I can afford crossover? Any tips?

Like said this truck probably wont get driven much, just cruised around town and to the lake.
Posted via Mobile Device

[grayharville]

Well today I picked up a few rattle cans and decided id get artistic with the interior, this is what I came up with.







Black trim, red metal. I think it goes together nice. I had an ugly brown dash laying around that had some minor cracks around the speakers. After paint I think it came out nice
Posted via Mobile Device

[foamypirate]

That color scheme looks really good!

[grayharville]

Thanks man, im about to post finished pics of the inside
Posted via Mobile Device

[grayharville]

Done! Me like.






Tell me what y'all think
Posted via Mobile Device

[Pop's C-10]

Originally Posted by dabels23

There is a 12" lift in the classifieds? 2" more inches always helps if you get in a deep hole.

Always...lol

[grayharville]

Pulled the front clip today, I have a rust free and straight one to go back on
Posted via Mobile Device

[grayharville]

Got my nice clip bolted on and gapped up. Tomorrow im gonna get on bodywork and hopefully spray some primer!
Posted via Mobile Device

[grayharville]

Well guys the progress on this truck got slow, I started college and lost interest in it for awhile, i also had to sell the 38s because I needed the cash..

But, as luck would have it I found a decent set of 36x13 super swamper iroks mounted on some 15x10 6 lug black wheels, for 150$!!!!

after I got those I realized my dreams of a 12 inch lift were a little far out there, all the small parts were gonna nickel and dime me to death.

So after some deliberation I decided to go with a 6 inch for now, and if I dont like it i'll trade it out later on. I think its gonna look sweet!

Got the rough country 6 inch kit with rear blocks (im cheap) for 439$ brand new. Right now im losing the battle getting the factory steering arm off. any ideas?

[rocking chevy]

Its looking good, and the 6 inch lift will look good.

[notyo_cheez]

Originally Posted by grayharville

Well guys the progress on this truck got slow, I started college and lost interest in it for awhile, i also had to sell the 38s because I needed the cash..

But, as luck would have it I found a decent set of 36x13 super swamper iroks mounted on some 15x10 6 lug black wheels, for 150$!!!!

after I got those I realized my dreams of a 12 inch lift were a little far out there, all the small parts were gonna nickel and dime me to death.

So after some deliberation I decided to go with a 6 inch for now, and if I dont like it i'll trade it out later on. I think its gonna look sweet!

Got the rough country 6 inch kit with rear blocks (im cheap) for 439$ brand new. Right now im losing the battle getting the factory steering arm off. any ideas?

I think you need a puller for that.

[Zebb]

Originally Posted by grayharville

Right now im losing the battle getting the factory steering arm off. any ideas?

Big F'n hammer. You have to shock it to get all three studs to let go. There are tapered cone washers in there. It's like taking 3 small tie rod ends off at the same time. Sometimes you can use an air chisel with a punch end at each tapered area. If you don't have an air chisel maybe try a punch and hammer.
They don't fall right off. Suck actually.

[grayharville]

I got it figured out, 8 pound sledge hammer does the trick! Hopefully my lift will come in today
Posted via Mobile Device

[Walts_restoration]

Ive started welding the nuts to the stud, then backing the stud out with an impact. Then using allen headed bolts with a new cone waster. Gonna make next time way easier.

[grayharville]

I got it out! Used brake fluid and aero-kroil, a 4 pound sledgee and some cuss words. I beat the arm down and they eventually popped out, then I pulled them out by hand
Posted via Mobile Device

[grayharville]

Got new parts!

6 inch rough country, new springs, blocks, add-a-leaf, shocks, steering arm, etc for 474$ out the door.

Im going to install it on thursday. I hope to have it lifted at the end of the day. it will still need finishing up but I want to get all the big stuff done.

Any suggestions for brake lines on the front? I like cheap. Its just a mud truck.

[THE "10" SILVERADO]

Definitely going to be keeping up with this. Lifted SWB = awesome

[notyo_cheez]

Spend the extra dollars on the braided brake lines especially if you intend to drive it off-road. It's cheap insurance. Never skimp on the brakes.

[grayharville]

I need to find brake lines. I was told napa can build them, but I went in the store and they said no. Damn...
Posted via Mobile Device