TX cleaning the garage #3

[NicoSlam]

more;


Poly trans mounts. installed once but never ran. great shape $25 SOLD to 2002yanks
original windshield washer resevoir with mounting bracket and lid $12
250 L6 motor mounts $15 SOLD to 2002yanks
new stainless steel shorty headers with new gaskets and bolts. 3/8" flange paid $156 sell for $65

[BB72CHEVKT]

Do the headers need any mods to work on our trucks?

[m6z]

$65 shipped on the headers? If so I'll take them.

[NicoSlam]

m6z

Sorry this does not include shipping. I estimate around $20 for shipping. Thats still half the price.

[NicoSlam]

BB72CHEVKT

I tried using them on my truck but due to using the front mounting holes on the chassis and using aftermarket motor mounts, The manifolds dumped directly over the front crossmember. In the pic you can see the relationship between the manifold dump and the 350SB block. that may help you see where they will be positioned in reference to your setup.

[BB72CHEVKT]

Originally Posted by NicoSlam

BB72CHEVKT

I tried using them on my truck but due to using the front mounting holes on the chassis and using aftermarket motor mounts, The manifolds dumped directly over the front crossmember. In the pic you can see the relationship between the manifold dump and the 350SB block. that may help you see where they will be positioned in reference to your setup.

Thanks for the info I will pass.

[2002yanks]

are the poly trans mounts for the inline 6 manual tranny? if so hows $50 shipped for those and the engine mounts to 13021? if yes to both let me know a paypal address and i`ll send funds tonight.

[NicoSlam]

Yes and sure. Sent you PP info.

thanks

[2002yanks]

Originally Posted by NicoSlam

Yes and sure. Sent you PP info.

thanks

$$$$ sent. sent a little extra to cover the fees for pp. please let me know how and when you send them. thanks again.
Kevin

[NicoSlam]

2002yanks

didn't have to do that but thank you.

[2002yanks]

Originally Posted by NicoSlam

2002yanks

didn't have to do that but thank you.

np. i have started requesting that when i sell(either add the 3% or send as a gift so no fees). so if i ask for it i figure i better do the same when i buy. thanks again. these get me closer to being ready to switch chassis`s.

[capev86]

is that overflow bottle factory correct for a 67-72? it looks like one from a
GM truck, but i thought our trucks only had the bottle as an option and it was a more universal type that hung on the radiator.

[NicoSlam]

capev86

I dont know why I wrote overflow its actually an original windshield washer resevoir with mounting bracket. sorry about that.

[jtkemp]

Do you still have the headers?

[NicoSlam]

yes they are still available

[jtkemp]

Will you ship and if so how much total?
Posted via Mobile Device

[2002yanks]

got my stuff. everything looks good. thanks!!