Well ! Need a new cab !!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigd65 · 08-21-2011, 06:10 PM

Well had some time to mess with the truck today and I pulled the AC / Heater assembly and I found all the rust on this " relatively rust free cab"

Now I have to eather keep it as a fishing / mud playing truck or find a new cab to restore it.
Posted via Mobile Device

str8axle55 · 08-21-2011, 06:45 PM

Got any pics? Where is it rusted, the firewall?

Goldfinger · 08-21-2011, 08:08 PM

a machine/ welding shop can make new panels if its localized

tucsonjwt · 08-21-2011, 09:03 PM

I see decent cabs for sale on CL for $250 (usually no doors/glass, etc, but sometimes the whole cab) - my guess is you can get the same in your neighborhood. Nice whole trucks with blown engines go for $1000. Old squares are one of the few good deals left, assuming you are into old gas hogs.
If I were you I would get a rust free old truck and transfer your drive train and good parts - cheaper and faster in the long run - once rust starts it spreads and you never see it all until it is too late. You should be able to sell parts off your current truck and come out $$ ahead. Scrap value on a whole truck is $250+.

bigd65 · 08-21-2011, 10:06 PM

Well I didn't take any pictures but it is the firewall. All along the seam down by the top of the floor boards, and of coarse the Forrest behind the engine where it always rusts
Posted via Mobile Device

gearheads78 · 08-21-2011, 10:22 PM

willett · 08-21-2011, 11:10 PM

i just scored me a cab for $200

vtwinsport · 08-22-2011, 08:59 AM

a rust free cab in canada will cost you a minimum of 1000 if you can find one! You guys are so lucky.

slammedLT1 · 08-22-2011, 04:42 PM

vtwin, im gonna be goin to edmonton to pick up a parts suburban (88-91) for the rad saddle and interior and what not, you got any good connections for misc. stuff or performance parts?

vtwinsport · 08-22-2011, 10:50 PM

Not really. The recyclers are are cleaned out round here. I have a second one I'm using as a donor. Other than that, Kijiji is what I use. Slim pickins for the good stuff.
Promax on 51 ave or Mopac on 170th st for new high performance.

slammedLT1 · 08-23-2011, 12:00 AM

You have any experience in dealing with Dix? I heard theyre petty wicked for deals.

vtwinsport · 08-23-2011, 08:33 AM

Never heard of them.

Tony@AirRideTech · 08-23-2011, 08:43 AM

Quote:

Originally Posted by bigd65

Well had some time to mess with the truck today and I pulled the AC / Heater assembly and I found all the rust on this " relatively rust free cab"

Now I have to eather keep it as a fishing / mud playing truck or find a new cab to restore it.
Posted via Mobile Device

Your in Tx and you cant find a rust free cab ?

motornut · 08-23-2011, 09:55 AM

Quote:

Originally Posted by vtwinsport

a rust free cab in canada will cost you a minimum of 1000 if you can find one! You guys are so lucky.

yup costly and slim pickins

**N2TRUX** · 08-23-2011, 10:36 AM

Quote:

Originally Posted by Tony@AirRideTech

Your in Tx and you cant find a rust free cab ?

He's not very good at looking Tony. I can't swing a dead cat around here with out hitting a rust free donor.

slammedLT1 · 08-23-2011, 02:22 PM

Quote:

Originally Posted by motornut

yup costly and slim pickins

Dude Im originally from Sault Ste Marie Ontario and they practically dont even exist. In AB its like goin way down south for parts. Waaaayyyy less road salt out this way!

motornut · 08-23-2011, 07:00 PM

Gee bet I'd wana go shoppin out there next time I wonder what it would cost to ship,drive one back,already sounds cheaper then goin south tho
Posted via Mobile Device

bigd65 · 08-23-2011, 10:11 PM

Quote:

Originally Posted by N2TRUX

He's not very good at looking Tony. I can't swing a dead cat around here with out hitting a rust free donor.

Well tell me where to look because down here south of Houston, there all rusted through at the same place
Posted via Mobile Device

tucsonjwt · 08-23-2011, 10:33 PM

If I lived in the great white north, I would just buy a rust free truck off Craigslist and have it shipped to me. Cross country US transport is about $800-$1000 the last time I checked, so from SW U.S. to Canadian border can't be much different in price, especially if you are not in a hurry. From what I read, getting through Canadian customs is paperwork intensive but not that pricey for a low cost vehicle - some companies specialize in this. Or, have it dropped at the border and drive it across, then strip it for parts?
As was mentioned, just because a vehicle is sold in the southern U.S. does not mean it is rust free. Many have been driven here from the rust belt, or have been exposed to salt/humidity from being in coastal areas (Florida, Texas coast, etc.) However, do a CL search in Tucson, Phoenix, Albuquerque, etc. and you will see tons of rust free squares. Many are banged up and mechanically shot, but some are fairly straight and all have rust free frames. I see beautiful squares needing an engine or trans for $2000 or less all the time. Why fight a rusted truck when you can get a nice one cheap? - I don't get it. You still have to replace all of the mechanical/electrical equipment over time - so spend those $$ on a good truck to start with.

bigd65 · 08-23-2011, 10:52 PM

I found a cab close and rust free for 60 bucks, probably get it this weekend
Posted via Mobile Device

**N2TRUX** · 08-23-2011, 11:08 PM

Quote:

Originally Posted by bigd65

I found a cab close and rust free for 60 bucks, probably get it this weekend
Posted via Mobile Device

See, I told ya you just need to look a bit harder. The guys from up North are going to shoot you for finding a clean cab for almost free.

Tony@AirRideTech · 08-24-2011, 10:17 AM

Quote:

Originally Posted by bigd65

Well tell me where to look because down here south of Houston, there all rusted through at the same place
Posted via Mobile Device

DelRio, Laredo ect.....

87GMCChris · 08-24-2011, 10:38 AM

Quote:

Originally Posted by N2TRUX

See, I told ya you just need to look a bit harder. The guys from up North are going to shoot you for finding a clean cab for almost free.

$60 dollars .....?!?!?!? Sorry, I am from Ontario, All we use is salt here. Sucks big time. Cars here 5 years old start to rust, let alone something from the 70's and 80's. I bought an almost rust free box here, for $600, and that was on the cheaper side. AND... It was a 6ft S10 box. Not even full size. Last I checked on a box for a square it was running 800 and up. For a southern rust free one. You guys down there dont know how good your really have it. Rant over , sorry.

motornut · 08-24-2011, 12:30 PM

Just googled that tour lol 48 hours straight drive
And that has a part through the US.
Doubt that would fly with US customs lol
I'd stay north,would wana fly out.And drive back,but I'm not lookin anymore
But curious any Jimmys/Blazers
Buying the 79 below 800 (2 hour drive for him)delivered with plow,

I think some states don't use salt,(of course ones that get snow/ice)
Is vermont one?
But here yup, on the steak,and on the road,can't live without it!
Posted via Mobile Device

vtwinsport · 08-24-2011, 02:55 PM

Quote:

Originally Posted by bigd65

I found a cab close and rust free for 60 bucks, probably get it this weekend
Posted via Mobile Device

Sigh...... you're killing us dude. I'm officially ignoring any of this any more, I'll lose sleep if I keep thinking about it.

08-21-2011, 06:10 PM	#1
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	Well ! Need a new cab !!!!! Well had some time to mess with the truck today and I pulled the AC / Heater assembly and I found all the rust on this " relatively rust free cab" Now I have to eather keep it as a fishing / mud playing truck or find a new cab to restore it. Posted via Mobile Device __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

08-21-2011, 06:45 PM	#2
str8axle55 Registered User Join Date: May 2009 Location: Weymouth Ma Posts: 489	Re: Well ! Need a new cab !!!!! Got any pics? Where is it rusted, the firewall? __________________ 03 GMC Yukon XL 2500 Quadrasteer, wife`s DD 84 Chevy K30 CC SRW 55 Chevy 210 2dr post

08-21-2011, 08:08 PM	#3
Goldfinger Registered User Join Date: May 2010 Location: laurel hill Fl Posts: 645	Re: Well ! Need a new cab !!!!! a machine/ welding shop can make new panels if its localized __________________ 1985 C10 Custom Deluxe LWB 305/700r4 [ Goldfinger ] 1999 k3500 crew cab dually 6.5tdi/4l80e

08-21-2011, 09:03 PM	#4
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: Well ! Need a new cab !!!!! I see decent cabs for sale on CL for $250 (usually no doors/glass, etc, but sometimes the whole cab) - my guess is you can get the same in your neighborhood. Nice whole trucks with blown engines go for $1000. Old squares are one of the few good deals left, assuming you are into old gas hogs. If I were you I would get a rust free old truck and transfer your drive train and good parts - cheaper and faster in the long run - once rust starts it spreads and you never see it all until it is too late. You should be able to sell parts off your current truck and come out $$ ahead. Scrap value on a whole truck is $250+.

08-21-2011, 10:06 PM	#5
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	Re: Well ! Need a new cab !!!!! Well I didn't take any pictures but it is the firewall. All along the seam down by the top of the floor boards, and of coarse the Forrest behind the engine where it always rusts Posted via Mobile Device __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe

08-21-2011, 10:22 PM	#6
gearheads78 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 563	Re: Well ! Need a new cab !!!!! Last edited by N2TRUX; 08-22-2011 at 09:04 AM. Reason: This is not a Wanted to Buy post.

08-21-2011, 11:10 PM	#7
willett Another Day, Another Dollar Join Date: Nov 2008 Location: North Vancouver, BC Posts: 1,316	Re: Well ! Need a new cab !!!!! i just scored me a cab for $200 __________________ -78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square"

08-22-2011, 08:59 AM	#8
vtwinsport Registered User Join Date: Nov 2008 Location: edmonton, alberta Posts: 293	Re: Well ! Need a new cab !!!!! a rust free cab in canada will cost you a minimum of 1000 if you can find one! You guys are so lucky. __________________ 76 Silverado, 2wd, long box, 350/th350, 3.42 posi, edelbrock performer 64cc heads, edelbrock 1405, 2101 intake, Hedman Headers, Comp Cam XE262 http://beerbreadbike.wordpress.com/

08-22-2011, 04:42 PM	#9
slammedLT1 Registered User Join Date: Jan 2003 Location: Grande Prairie, AB Posts: 77	Re: Well ! Need a new cab !!!!! vtwin, im gonna be goin to edmonton to pick up a parts suburban (88-91) for the rad saddle and interior and what not, you got any good connections for misc. stuff or performance parts? __________________ DIGGER 1984 GMC Sierra 1500 LQ4 T56 12B Chopped 2 1/4, Dropped 6/7, Shaved, Yenko Stripes 2004.5 CCSB GMC 2500HD DMAX LLY, 6" Liftmaster, 6 Fox Resi 2.0 325/50/22" Kumho A/T on KMW's LBZ MP, 5"Ex, Bullydog GT 1996 ECSB GMC Sierra 1500 350/4L60E, FL Headers, 2450 Stall, 6" Pro Comp,3" BL, Shock Hoops, , TrXus STS 38's

08-22-2011, 10:50 PM	#10
vtwinsport Registered User Join Date: Nov 2008 Location: edmonton, alberta Posts: 293	Re: Well ! Need a new cab !!!!! Not really. The recyclers are are cleaned out round here. I have a second one I'm using as a donor. Other than that, Kijiji is what I use. Slim pickins for the good stuff. Promax on 51 ave or Mopac on 170th st for new high performance. __________________ 76 Silverado, 2wd, long box, 350/th350, 3.42 posi, edelbrock performer 64cc heads, edelbrock 1405, 2101 intake, Hedman Headers, Comp Cam XE262 http://beerbreadbike.wordpress.com/

08-23-2011, 12:00 AM	#11
slammedLT1 Registered User Join Date: Jan 2003 Location: Grande Prairie, AB Posts: 77	Re: Well ! Need a new cab !!!!! You have any experience in dealing with Dix? I heard theyre petty wicked for deals. __________________ DIGGER 1984 GMC Sierra 1500 LQ4 T56 12B Chopped 2 1/4, Dropped 6/7, Shaved, Yenko Stripes 2004.5 CCSB GMC 2500HD DMAX LLY, 6" Liftmaster, 6 Fox Resi 2.0 325/50/22" Kumho A/T on KMW's LBZ MP, 5"Ex, Bullydog GT 1996 ECSB GMC Sierra 1500 350/4L60E, FL Headers, 2450 Stall, 6" Pro Comp,3" BL, Shock Hoops, , TrXus STS 38's

08-23-2011, 08:33 AM	#12
vtwinsport Registered User Join Date: Nov 2008 Location: edmonton, alberta Posts: 293	Re: Well ! Need a new cab !!!!! Never heard of them. __________________ 76 Silverado, 2wd, long box, 350/th350, 3.42 posi, edelbrock performer 64cc heads, edelbrock 1405, 2101 intake, Hedman Headers, Comp Cam XE262 http://beerbreadbike.wordpress.com/

08-23-2011, 07:00 PM	#17
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Well ! Need a new cab !!!!! Gee bet I'd wana go shoppin out there next time I wonder what it would cost to ship,drive one back,already sounds cheaper then goin south tho Posted via Mobile Device __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

08-23-2011, 10:33 PM	#19
tucsonjwt Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 3,189	Re: Well ! Need a new cab !!!!! If I lived in the great white north, I would just buy a rust free truck off Craigslist and have it shipped to me. Cross country US transport is about $800-$1000 the last time I checked, so from SW U.S. to Canadian border can't be much different in price, especially if you are not in a hurry. From what I read, getting through Canadian customs is paperwork intensive but not that pricey for a low cost vehicle - some companies specialize in this. Or, have it dropped at the border and drive it across, then strip it for parts? As was mentioned, just because a vehicle is sold in the southern U.S. does not mean it is rust free. Many have been driven here from the rust belt, or have been exposed to salt/humidity from being in coastal areas (Florida, Texas coast, etc.) However, do a CL search in Tucson, Phoenix, Albuquerque, etc. and you will see tons of rust free squares. Many are banged up and mechanically shot, but some are fairly straight and all have rust free frames. I see beautiful squares needing an engine or trans for $2000 or less all the time. Why fight a rusted truck when you can get a nice one cheap? - I don't get it. You still have to replace all of the mechanical/electrical equipment over time - so spend those $$ on a good truck to start with.

08-23-2011, 10:52 PM	#20
bigd65 Registered User Join Date: Mar 2000 Location: Clute, TX. Posts: 1,935	Re: Well ! Need a new cab !!!!! I found a cab close and rust free for 60 bucks, probably get it this weekend Posted via Mobile Device __________________ 2004 Silverado Crewcab 1972 Chevy Monte Carlo 2017 Chevy Tahoe



Register or Log In To remove these advertisements.

08-24-2011, 12:30 PM	#24
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Well ! Need a new cab !!!!! Just googled that tour lol 48 hours straight drive And that has a part through the US. Doubt that would fly with US customs lol I'd stay north,would wana fly out.And drive back,but I'm not lookin anymore But curious any Jimmys/Blazers Buying the 79 below 800 (2 hour drive for him)delivered with plow, I think some states don't use salt,(of course ones that get snow/ice) Is vermont one? But here yup, on the steak,and on the road,can't live without it! Posted via Mobile Device __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

Register or Log In To remove these advertisements.