PA front and rear bumpers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pro Metal Shop · 09-02-2011, 06:17 PM

I have a set of bumpers that are driver quality or could be re-chromed $100 for the pair.... plus the ride.. Second picture shows a small dent coming from the rear side forward, very repairable.. BUMPERS ARE SOLD ! ! ! ! THANK YOU

**rideblue00** · 09-03-2011, 07:54 AM

Are these factory or reproductions?

Thanks
Tom

Pro Metal Shop · 09-03-2011, 08:19 AM

Hi Tom
Knowing the trucks history (came off a neighborhood farm ) I'm going to say they are GM.

However, I will take a look at them better and today and take pictures.

**rideblue00** · 09-03-2011, 08:29 AM

Ok i will check back later. Im interested for sure if you think their factory and straight. im not worried about dents or chrome, just straightness. Also can you measure the thickness? and i will compare with mine.

Thanks'
Tom

Pro Metal Shop · 09-03-2011, 08:58 AM

Sure I will throw a micro on the edge, they are very straight and looks as if the factory chrome is wearing off even as if you wet sanded them which we know the repops don't ware like that...

Pro Metal Shop · 09-03-2011, 09:23 AM

0.167 thickness and .125 is an 1/8 inch so not quite 3/16th inch thick. Don't believe repops are near that thick.

Posted via Mobile Device
Posted via Mobile Device

**rideblue00** · 09-03-2011, 10:37 AM

Whats your calipers say? .161 i think?

Pro Metal Shop · 09-03-2011, 12:13 PM

Yup I re-checked it it was .161 when I went to put it away it was on 167....

**rideblue00** · 09-03-2011, 05:33 PM

I will check mine later tonight and get back with you tommorrow.

Thanks
Tom

77chris03 · 09-03-2011, 05:53 PM

i have a front and rear and they say .162 +- .003 one is a 71(front) and 68 (rear)

**rideblue00** · 09-04-2011, 10:18 AM

Ok im going out to check mine. I wont be able to get back with you until later on this afternoon. A tree fall at my grandmas house and im goin to clean it up. I have another question(i ask too many lol) Are you willing to sell just the rear? I only need the rear actually. How about a shipping price to 48144 (MI)?

Thanks
Tom

Pro Metal Shop · 09-04-2011, 11:57 AM

Sure I will sell just the rear ! ! Also I will check Greyhound prices if you have a terminal near you. They seem to be less expensive then most...

**rideblue00** · 09-04-2011, 06:08 PM

Well, for now get a price on shipping the pair if possible. I may just buy both.Let me know. Oh and i checked both of the other bumpers thickness. They both mic in at .150. So id say you have factory ones.
Thanks
Tom

Pro Metal Shop · 09-04-2011, 06:28 PM

Did you have a greyhound near you ?

**rideblue00** · 09-04-2011, 09:32 PM

Yes i do. Toledo Ohio. I forgot to tell you earlier.

bobbylast · 09-05-2011, 12:05 PM

Quote:

Originally Posted by Pro Metal Shop

Did you have a greyhound near you ?

interested in the front for fifty if its available as i have a roll pan on the back. 32570...we have a greyhound in pensacola. let me know

Pro Metal Shop · 09-05-2011, 05:08 PM

Ok Bobbylast your second in line for the front.... will get ship quotes tomorrow...

**rideblue00** · 09-05-2011, 08:20 PM

Looks like you got a buyer for the front. I will take just the rear then.

Pro Metal Shop · 09-05-2011, 08:24 PM

Sounds good

bobbylast · 09-05-2011, 08:41 PM

Quote:

Originally Posted by Pro Metal Shop

Sounds good

let me know

Pro Metal Shop · 09-05-2011, 09:40 PM

Have shipping quotes tomorrow for rideblue00 rear bumper and bobbylast for the front bumper...

Pro Metal Shop · 09-06-2011, 07:28 AM

PM's sent to Bobbylast and Rideblue00

Slow Build · 09-12-2011, 11:20 PM

So, have they been sold?

Pro Metal Shop · 09-12-2011, 11:38 PM

No not sold yet Shipping seems to be killing the deal

Slow Build · 09-13-2011, 12:53 AM

If it's not too much trouble could you PM me the shipping price for the rear bumper to 94531. The closest Greyhound is Tracy, Ca.

09-02-2011, 06:17 PM	#1
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	front and rear bumpers I have a set of bumpers that are driver quality or could be re-chromed $100 for the pair.... plus the ride.. Second picture shows a small dent coming from the rear side forward, very repairable.. *BUMPERS ARE SOLD ! ! ! ! THANK YOU* __________________ Thanks Steve http://chevylegends.com/forum/index.php Last edited by Pro Metal Shop; 09-24-2011 at 12:23 PM.

09-03-2011, 07:54 AM	#2
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers Are these factory or reproductions? Thanks Tom

09-03-2011, 08:19 AM	#3
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Hi Tom Knowing the trucks history (came off a neighborhood farm ) I'm going to say they are GM. However, I will take a look at them better and today and take pictures. __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-03-2011, 08:29 AM	#4
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers Ok i will check back later. Im interested for sure if you think their factory and straight. im not worried about dents or chrome, just straightness. Also can you measure the thickness? and i will compare with mine. Thanks' Tom

09-03-2011, 08:58 AM	#5
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Sure I will throw a micro on the edge, they are very straight and looks as if the factory chrome is wearing off even as if you wet sanded them which we know the repops don't ware like that... __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-03-2011, 09:23 AM	#6
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers 0.167 thickness and .125 is an 1/8 inch so not quite 3/16th inch thick. Don't believe repops are near that thick. Posted via Mobile Device Posted via Mobile Device __________________ Thanks Steve http://chevylegends.com/forum/index.php Last edited by Pro Metal Shop; 09-03-2011 at 10:41 AM.

09-03-2011, 10:37 AM	#7
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers Whats your calipers say? .161 i think?

09-03-2011, 12:13 PM	#8
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Yup I re-checked it it was .161 when I went to put it away it was on 167.... __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-03-2011, 05:33 PM	#9
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers I will check mine later tonight and get back with you tommorrow. Thanks Tom

09-03-2011, 05:53 PM	#10
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: front and rear bumpers i have a front and rear and they say .162 +- .003 one is a 71(front) and 68 (rear) __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

09-04-2011, 10:18 AM	#11
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers Ok im going out to check mine. I wont be able to get back with you until later on this afternoon. A tree fall at my grandmas house and im goin to clean it up. I have another question(i ask too many lol) Are you willing to sell just the rear? I only need the rear actually. How about a shipping price to 48144 (MI)? Thanks Tom

09-04-2011, 11:57 AM	#12
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Sure I will sell just the rear ! ! Also I will check Greyhound prices if you have a terminal near you. They seem to be less expensive then most... __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-04-2011, 06:08 PM	#13
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers Well, for now get a price on shipping the pair if possible. I may just buy both.Let me know. Oh and i checked both of the other bumpers thickness. They both mic in at .150. So id say you have factory ones. Thanks Tom

09-04-2011, 06:28 PM	#14
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Did you have a greyhound near you ? __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-04-2011, 09:32 PM	#15
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers Yes i do. Toledo Ohio. I forgot to tell you earlier.



Register or Log In To remove these advertisements.

09-05-2011, 05:08 PM	#17
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Ok Bobbylast your second in line for the front.... will get ship quotes tomorrow... __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-05-2011, 08:20 PM	#18
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,860	Re: front and rear bumpers Looks like you got a buyer for the front. I will take just the rear then.

09-05-2011, 08:24 PM	#19
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Sounds good __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-05-2011, 09:40 PM	#21
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers Have shipping quotes tomorrow for rideblue00 rear bumper and bobbylast for the front bumper... __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-06-2011, 07:28 AM	#22
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers PM's sent to Bobbylast and Rideblue00 __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-12-2011, 11:20 PM	#23
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: front and rear bumpers So, have they been sold? __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

09-12-2011, 11:38 PM	#24
Pro Metal Shop Registered User Join Date: Jun 2009 Location: Danville PA. Posts: 487	Re: front and rear bumpers No not sold yet Shipping seems to be killing the deal __________________ Thanks Steve http://chevylegends.com/forum/index.php

09-13-2011, 12:53 AM	#25
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: front and rear bumpers If it's not too much trouble could you PM me the shipping price for the rear bumper to 94531. The closest Greyhound is Tracy, Ca. __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

Register or Log In To remove these advertisements.