Opinions on a Billet Specialties wheel please?

[CC69Rat]

My plan is a Hugger orange big block 68 stepper, (in my build) white top, white grille 4.5 / 6" drop and a mild Cnotch. (prob Porterbuilt, but I haven't decided yet) Could use some advice there too.

F - 20x8.5 with 5.25 BS. 255/40/20
R - 20x8.5 with ~4.875 BS 255/45/20

Billet Specialties Dagger G - I like the gray for the vintage look, should I go polished? The truck will be shop logo'ed by my pop.

Coley's Rod Shop, something like that. Dad is a commercial artist and amazing at freehand logos and design. I'm not hesitating for a second for him to logo this one as I'm not building it to resell. My son will get it one day.

I saw this wheel at the Shades of the Past and I really like the dished look.

Your thoughts?

[1stchevy]

I don't think you can go wrong with any wheel billet specialties makes JMO.
Posted via Mobile Device

[tubbedII]

I'd go grey with the shop logo look...

[original-71]

if your gonna spend the money might as well go polished if not there are cheaper wheels out there for just a shop look. and with those colors i cant see gray, i see nice and shiny. just my thoughts, its your truck and your decision.

[fastwillie 696969]

i dont care for the new school 20s size ,but i got 15 inch deep dish billet spec.

[VA72C10]

Originally Posted by original-71

if your gonna spend the money might as well go polished if not there are cheaper wheels out there for just a shop look. and with those colors i cant see gray, i see nice and shiny. just my thoughts, its your truck and your decision.

I agree...if not polished just get coys, boss 338's or the new wheel that looks like them but fits better

Probably half price of the billet specialties...

Now...if polished...the billet specialties will be a much nicer rim overall and I do like the styling of those...

[lolife99]

Great choice in wheels.
Measure, measure, measure, before ordering.
I'd rather have a 5.5" BS up front. (with a 20x8.5" wheel)

[CC69Rat]

Keith - would a 255/40/20 work up front with stock inner fenders? I have 2.5" spindles, one coil and a big chunk of iron between the frame rails.

20x8.5 - 5.5" BS and the 255/40. What are your thoughts on the max tire height / diameter? Would I be better off with 255/35 ? They are 27.05" tall.

After talking to you on my other post with the Coys, I bought one of the Percy's Wheelrites and it helped a TON. Thanks again for your help with backspacing. I'm getting really close on these wheels. My wife saw them and actually picked them out as her favorites from the Billet Specialties display last weekend. I like them a lot.

Torn between gray and polished though .. humm. They have more of a dished look than a Coys C5 (Concave maybe is a better word) and just a different overall look. Nothing against Coys or 338's I just want something different.

There is a reason a bunch of people have Coys and 338s, they look awesome no doubt.

[lolife99]

Originally Posted by CC69Rat

Keith - would a 255/40/20 work up front with stock inner fenders? I have 2.5" spindles, one coil and a big chunk of iron between the frame rails.

20x8.5 - 5.5" BS and the 255/40. What are your thoughts on the max tire height / diameter? Would I be better off with 255/35 ? They are 27.05" tall.

The reason I say 5.5" BS is because that is the exact BS we measured up for Nates truck.
(Billet Specialties Vintecs 20x8.5's up front).
Nate's truck is dropped 4.5/6 with ECE products.
He still has his inner fenders.
Toyo 255/40-20 tire.

I don't mention his rear wheels because they won't work with a stepside bed.

[lolife99]

If anyone can afford Billet Specialties wheels I highly recommend them.
To me,... they are one the BEST wheels available.
Gray or polished,... they are perfect.

[68Stepbed]

Sorry I don't have a better pic, but this should give you an idea.

[clear]

I love my Billet Specialties wheels. Mirror like polish is amazing.

[19seventeeCustom]

Originally Posted by fastwillie 696969

i dont care for the new school 20s size ,but i got 15 inch deep dish billet spec.

Wow, it's you again.... I think you have made it known to the entire board (several times) that you "don't care for new school 20s" are just looking to pursuade people from buying 20s or what?

back on topic,, I think the grey wheels would look nice with that theme. But any 20" BS wheel is gonna look fantastic!!

Like mentioned earlier, measure measure measure!!

[fastwillie 696969]

Originally Posted by 19seventeeCustom

Wow, it's you again.... I think you have made it known to the entire board (several times) that you "don't care for new school 20s" are just looking to pursuade people from buying 20s or what?

back on topic,, I think the grey wheels would look nice with that theme. But any 20" BS wheel is gonna look fantastic!!

Like mentioned earlier, measure measure measure!!

i thnk you should mind your own business ,i havent pursuade anyone from buying anything
so STFU

Copied from the rules maybe you both could use a refresher?
III. No pissing matches. Its fine to disagree, but once a thread has run its course, and degenerated into little more than an insult fest, it will be locked. While this will require a judgment call by the Administrators & Moderators. The members of this site can keep our moderating to a minimum by exercising a little discretion and self- control. Excessive profanity will lead to a 24 hour suspension at the Administrations discretion.

IV. Pure trolling, either to upset someone or simply for your personal
enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

[19seventeeCustom]

Originally Posted by fastwillie 696969

i thnk you should mind your own business ,i havent pursuade anyone from buying anything
so STFU

maybe you havn't, but you sure try like a litte lost puppy. Everytime I click on a thread about a 20" wheel decision I see you chiming in about how you hate 20" wheels,,, well, if thats the case, STFO of these threads....

we get it,, you like 15's....congrats

Copied from the rules, maybe you could both use a refesher?
III. No pissing matches. Its fine to disagree, but once a thread has run its course, and degenerated into little more than an insult fest, it will be locked. While this will require a judgment call by the Administrators & Moderators. The members of this site can keep our moderating to a minimum by exercising a little discretion and self- control. Excessive profanity will lead to a 24 hour suspension at the Administrations discretion.

IV. Pure trolling, either to upset someone or simply for your personal
enjoyment, is strictly prohibited. If you're here to cause trouble, it will be a very short stay. Immediate BAN and you will be reported to your ISP.

[gringoloco]

The Daggers look awesome! The 5.25 BS will work up front, but 5.5 may clear the inner fenders a little better. It all depends on the look you're after- some people don't like the tucked-in effect. You could also try a 275/40-20 out back, to give you a little bit of a 'rubber rake' and a little wider tire. The grey will look great on orange/white

As stated before, if you can afford Billet Specialties, go for it, the quality is no comparison to the other off the shelf or 'make it work' wheels.

[CC69Rat]

Originally Posted by 68Stepbed

Sorry I don't have a better pic, but this should give you an idea.

You guys are great man. .. best site on the web.

And, I like 15's too I have steelies on my other truck. Nothing against 15's. .. or anything. If it rolls, I like it. The faster the better. I am a cyclist and about lost my life in a crash a couple yrs ago. 54mph on a road bike, down Lookout mtn.

No hatin from me on any of it. I love this site.

[CC69Rat]

My dad and I sold the 68 stepper - "Miss Daisy" as he named it. A guy from New Jeyouurseie is coming down to pick it up tomorrow with cash - ~ fingers crossed ~ (NJ, just kidding btw) $4,350 - we're going to split it ..

I think I know where my 1/2 might be going. I am 99% sure I am going this route, will probably do the polished ones.

Thanks for all your input and opinions.
Chad

[original-71]

Originally Posted by CC69Rat

I think I know where my 1/2 might be going. I am 99% sure I am going this route, will probably do the polished ones.

Thanks for all your input and opinions.
Chad

Good Choice

[1stchevy]

Be sure to post pics!
Posted via Mobile Device

[CC69Rat]

As soon as the deal on the 68 is done tomorrow abour 4pm, I'll drop the money in the bank and place the order Monday or Tues. I'm a bit skiddish till the guy pulls away and we have the money you just never know. It will be a while before I get them but I will put them on just to take some pics. I'm going to keep my truck rallys on while I'm sanding around on it. Once I get it straight I plan to pull it back down to a rolling chassis and finalize my C notch, etc. Just take it back up from there. It might be spring before it starts coming back together.

I am going to do 5.5 BS in the front. Nate's truck is one of my all time favorites. .. looks awesome.

[Painter D]

Originally Posted by lolife99

If anyone can afford Billet Specialties wheels I highly recommend them.
To me,... they are one the BEST wheels available.
Gray or polished,... they are perfect.

I agree , I've had a couple of sets and I pretty much wouldn't run anything of less quality.

[BrianV]

and a mild Cnotch. (prob Porterbuilt, but I haven't decided yet) Could use some advice there too.


i have porterbilts mild c notch on my truck and it is a very nice piece and gives you plenty of drop as long as you dont want to lay frame and actually lets you have a very good looking ride height. my truck is in process but i will post some pics of my rear c notch - all of porterbilts stuff is top notch in my opinion

hope your project goes well

[72BlckButy]

IMO.... if you're only going to run a 6" drop in the rear, a notch is not needed. That's my opinion.

If you're tires end up being taller than a 295/40 in the rear, maybe, but I have only bottomed out once (no snubbers) and I was just pushing it to hard for the terrain.

Also, there is no other wheel company IMO.

I'm extremely happy with my BS wheels and would order from them again; and personally I'm pro grey center.

[CC69Rat]

Working with n2billet on my order, I went with the gray ones.

I restored a 69 Camaro a few years ago and when I bought the car as a driver it was a really nice shade of blue. It was faded, but really a sharp color. We built a color match to it starting with Marina Blue from the 66 Chevelle for example. Added about 6 more toners to it and man it is beautiful IMO. I'll post pics, I still have a little in a can.

I'll post pics once the wheels come in.