NC 250 6 cylinder power steering brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**NC67Chev** · 09-22-2011, 02:54 PM

Up for grabs is a power steering set-up for a 250 6 cylinder. The part numbers on the brackets are: 3973156 and 3973157. My research shows these being used on cars from 70 - 72. This particular setup positions the power steering pulley on the first groove of the water pump & damper.

In order to complete this setup, you will need a 2 groove water pump pulley...p/n 3995646AH will work perfectly. You will also need a 2 groove alternator pulley, which can be had at any decent alternator shop. I'm not including the pulleys because I would have to pay more $ for them, and don't want to raise the price any higher.

I think the pump is good but it was pulled from a non-running car, so I'm not sure. It will definitely clean up nicely. $150 plus shipping

OLEBEATER · 09-22-2011, 03:00 PM

How much?

**NC67Chev** · 09-22-2011, 03:05 PM

Quote:

Originally Posted by OLEBEATER

How much?

$150 plus shipping

OLEBEATER · 09-22-2011, 03:09 PM

I'll pass.........thanks.

**NC67Chev** · 09-30-2011, 11:12 AM

Offers? What if I round up a 2 groove WP pulley?

longbed67 · 09-30-2011, 01:45 PM

Interested, pending on some other possible sales.

sfcharr · 12-09-2012, 06:31 PM

is this still available?

bulldawg2 · 12-10-2012, 10:09 PM

I will offer $135 shipped to 30127- Atlanta GA area. Let me know

**NC67Chev** · 12-11-2012, 10:02 AM

Sorry guys, this set-up is long gone. All I have left is a 2 groove water pump pulley and an add-on 3rd groove.
Posted via Mobile Device
Posted via Mobile Device

**PICKMUP** · 12-12-2012, 08:44 PM

I am interested in the add-on 3rd pulley. Price? thanks, frank

**NC67Chev** · 12-12-2012, 09:56 PM

Hi Frank,

Is $15 okay? Here's a pic of it, along with the double pulley, in an old post:

http://67-72chevytrucks.com/vboard/s...d.php?t=533940
Posted via Mobile Device
Posted via Mobile Device

**slepysal** · 12-13-2012, 08:57 PM

what you looking to get for double ?

**PICKMUP** · 12-14-2012, 04:26 PM

Quote:

Originally Posted by NC67Chev

Hi Frank,

Is $15 okay? Here's a pic of it, along with the double pulley, in an old post:

http://67-72chevytrucks.com/vboard/s...d.php?t=533940
Posted via Mobile Device
Posted via Mobile Device

That is good. PM me your PayPal addy with total & I will send payment right out. thanks, frank

**NC67Chev** · 12-14-2012, 08:21 PM

Quote:

Originally Posted by slepysal

what you looking to get for double ?

How about $15 plus shipping?
Posted via Mobile Device

**slepysal** · 12-15-2012, 12:26 AM

Quote:

Originally Posted by NC67Chev

How about $15 plus shipping?
Posted via Mobile Device

total shiped to ca 95131?

**NC67Chev** · 12-15-2012, 10:34 AM

Quote:

Originally Posted by slepysal

total shiped to ca 95131?

PM sent
Posted via Mobile Device

09-22-2011, 02:54 PM	#1
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	250 6 cylinder power steering brackets Up for grabs is a power steering set-up for a 250 6 cylinder. The part numbers on the brackets are: 3973156 and 3973157. My research shows these being used on cars from 70 - 72. This particular setup positions the power steering pulley on the first groove of the water pump & damper. In order to complete this setup, you will need a 2 groove water pump pulley...p/n 3995646AH will work perfectly. You will also need a 2 groove alternator pulley, which can be had at any decent alternator shop. I'm not including the pulleys because I would have to pay more $ for them, and don't want to raise the price any higher. I think the pump is good but it was pulled from a non-running car, so I'm not sure. It will definitely clean up nicely. $150 plus shipping Attached Images __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar Last edited by NC67Chev; 09-22-2011 at 03:04 PM. Reason: Forgot to list price

09-22-2011, 03:00 PM	#2
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 250 6 cylinder power steering brackets How much?

09-22-2011, 03:09 PM	#4
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 250 6 cylinder power steering brackets I'll pass.........thanks.

09-30-2011, 11:12 AM	#5
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 250 6 cylinder power steering brackets Offers? What if I round up a 2 groove WP pulley? __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

09-30-2011, 01:45 PM	#6
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 250 6 cylinder power steering brackets Interested, pending on some other possible sales.

12-09-2012, 06:31 PM	#7
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: 250 6 cylinder power steering brackets is this still available?

12-10-2012, 10:09 PM	#8
bulldawg2 Registered User Join Date: Nov 2012 Location: Powder Springs GA Posts: 15	Re: 250 6 cylinder power steering brackets I will offer $135 shipped to 30127- Atlanta GA area. Let me know

12-11-2012, 10:02 AM	#9
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 250 6 cylinder power steering brackets Sorry guys, this set-up is long gone. All I have left is a 2 groove water pump pulley and an add-on 3rd groove. Posted via Mobile Device Posted via Mobile Device __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

12-12-2012, 08:44 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: 250 6 cylinder power steering brackets I am interested in the add-on 3rd pulley. Price? thanks, frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170

12-12-2012, 09:56 PM	#11
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: 250 6 cylinder power steering brackets Hi Frank, Is $15 okay? Here's a pic of it, along with the double pulley, in an old post: http://67-72chevytrucks.com/vboard/s...d.php?t=533940 Posted via Mobile Device Posted via Mobile Device __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

12-13-2012, 08:57 PM	#12
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: 250 6 cylinder power steering brackets what you looking to get for double ? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.