NE Parting out--1981 3/4 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**thinair** · 09-24-2011, 01:45 PM

Keeping the tires and the axles........interior is mostly shot and the body is rusty.......
1.sold 16.5x9.75 8on6.5 BC Slots missing one lugnut on each.....$300 plus the ride
2. sold4" front lift springs,rear blocks,shocks,ubolts(if they come off)....$200 plus ride
3. 350 motor. Runs, probablly could use a tune-up, air cleaner to pan with all accesories...$350
4. TH400 transmission......$300 plus the ride
5. NP208 t-case for TH400/manual trans......$200 plus the ride
any other pieces/parts, just ask and I will price for ya..........I know that no one is close to me (distance wise) for the bigger stuff, but it's worth a shot

madcow75 · 09-24-2011, 04:17 PM

Does that thing have cruise conrtols?

madcow75 · 09-24-2011, 04:18 PM

How much for your dual steering stabilier setup?

madcow75 · 09-24-2011, 04:20 PM

What condition are the roof lights in?

**old Rusty C10** · 09-24-2011, 05:41 PM

the door panel inserts how much shipped to 08859 in Parlin NJ
also how is the instrument bezel and how much shipped to same address

**thinair** · 09-25-2011, 02:12 AM

work has taken me out of town. I will be back sunday evening and should be able to get you shipping quotes by then, monday at the latest..

Madcow....yes it does have cruise. $35 for the dual stabilizers plus the ride, and the cab lights are SOLD.

Rusty, the bezel has been cut for a radio. Figure $20 for the panel inserts,if that will work for ya, and like stated above, will get the shipping quotes to you ASAP.

I didn't really get any time to look at the condition of these items. Will let you know.

**old Rusty C10** · 09-25-2011, 08:29 AM

$20 sounds good just please if ya can post a pic or so and let me know all the posts are good etc I will PM you my exact address for shipping purposes

HeavyMetalChevy · 09-28-2011, 09:09 AM

Instrument cluster pics... shape?? thanks

**michael bustamante** · 09-28-2011, 06:27 PM

Whats that thing hanging off the rear bumper?

**thinair** · 09-28-2011, 09:52 PM

A clevis.
Posted via Mobile Device

**thinair** · 09-29-2011, 04:55 PM

Quote:

Originally Posted by HeavyMetalChevy

Instrument cluster pics... shape?? thanks

Really long houirs at work right now, haven't forgot about ya.
Posted via Mobile Device

HeavyMetalChevy · 09-29-2011, 06:24 PM

Quote:

Originally Posted by thinair

Really long houirs at work right now, haven't forgot about ya.
Posted via Mobile Device

Hey no prob.. I can def. relate to that!!! Much thanks!

**thinair** · 10-07-2011, 01:36 AM

Quote:

Originally Posted by HeavyMetalChevy

Hey no prob.. I can def. relate to that!!! Much thanks!

Ok.......this time I forgot about ya.....writing myself a note to get your pics. Sorry.

**Dieselwrencher** · 10-07-2011, 03:27 AM

How nice are the tires on it?

**thinair** · 10-07-2011, 09:24 AM

I am keeping the tires for my 82
Posted via Mobile Device

benoit454 · 10-17-2011, 04:24 PM

roll bar price and would you ship it? does it come apart or no?

**ScottH** · 10-17-2011, 06:12 PM

what kind of shape is dash pad in?

Also looking for a good right side taillight with bezel, must be in VG condition (light and chrome trim).

thanks
Scott

**thinair** · 10-18-2011, 09:13 AM

Chris, out of town till late Wednesday. I will look at it Thursday.
scott, pad is junk. I will look at the tail light. Would hold your breath on it being really nice though....lol
Posted via Mobile Device

**ScottH** · 10-19-2011, 10:59 PM

also need an auto shifter arm in decent shape, and a tan door storage bag in nice condition

thanks

oldblue1968chevy · 10-21-2011, 12:35 AM

Would you mind popping the cap/rotor off and taking the weights out and telling me the number on the 2 outside weights? Im looking for #41

I would greatly appreciate it!!

Liddy71 · 10-21-2011, 10:58 PM

how much for both head light buckets and clips and springs

**thinair** · 10-23-2011, 12:21 PM

Quote:

Originally Posted by benoit454

roll bar price and would you ship it? does it come apart or no?

Roll bar comes apart....haven't had a chance to see what shipping would be. Gonna want $50 plus the shipping...let me know if you are still interested.
Posted via Mobile Device

**thinair** · 10-23-2011, 12:28 PM

Quote:

Originally Posted by ScottH

also need an auto shifter arm in decent shape, and a tan door storage bag in nice condition

thanks

Scott, tail light is there but not nice. Shifter handle will stay with the column and the pockets have been painted(badly). I will keep an eye out for those things though. Shouldn't be to hard to come across. Matt
Posted via Mobile Device

**thinair** · 10-23-2011, 12:30 PM

Quote:

Originally Posted by oldblue1968chevy

Would you mind popping the cap/rotor off and taking the weights out and telling me the number on the 2 outside weights? Im looking for #41

I would greatly appreciate it!!

I will look at a couple distributors I have laying around. Wont be untill Tuesday though.
Posted via Mobile Device

**thinair** · 10-23-2011, 12:31 PM

Quote:

Originally Posted by Liddy71

how much for both head light buckets and clips and springs

On one of the bezels, the bars that run across are broken. I could get pics for ya if you would still be interested. Let me know. Matt
Posted via Mobile Device

09-24-2011, 01:45 PM	#1
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,011	Parting out--1981 3/4 ton 4x4 Keeping the tires and the axles........interior is mostly shot and the body is rusty....... 1.sold 16.5x9.75 8on6.5 BC Slots missing one lugnut on each.....$300 plus the ride 2. sold4" front lift springs,rear blocks,shocks,ubolts(if they come off)....$200 plus ride 3. 350 motor. Runs, probablly could use a tune-up, air cleaner to pan with all accesories...$350 4. TH400 transmission......$300 plus the ride 5. NP208 t-case for TH400/manual trans......$200 plus the ride any other pieces/parts, just ask and I will price for ya..........I know that no one is close to me (distance wise) for the bigger stuff, but it's worth a shot Last edited by thinair; 10-26-2011 at 08:21 PM.

09-24-2011, 04:17 PM	#2
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out--1981 3/4 ton 4x4 Does that thing have cruise conrtols?

09-24-2011, 04:18 PM	#3
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out--1981 3/4 ton 4x4 How much for your dual steering stabilier setup?

09-24-2011, 05:41 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,300	Re: Parting out--1981 3/4 ton 4x4 the door panel inserts how much shipped to 08859 in Parlin NJ also how is the instrument bezel and how much shipped to same address __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-25-2011, 02:12 AM	#6
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,011	Re: Parting out--1981 3/4 ton 4x4 work has taken me out of town. I will be back sunday evening and should be able to get you shipping quotes by then, monday at the latest.. Madcow....yes it does have cruise. $35 for the dual stabilizers plus the ride, and the cab lights are SOLD. Rusty, the bezel has been cut for a radio. Figure $20 for the panel inserts,if that will work for ya, and like stated above, will get the shipping quotes to you ASAP. I didn't really get any time to look at the condition of these items. Will let you know.

09-24-2011, 04:20 PM	#4
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out--1981 3/4 ton 4x4 What condition are the roof lights in?

09-25-2011, 08:29 AM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,300	Re: Parting out--1981 3/4 ton 4x4 $20 sounds good just please if ya can post a pic or so and let me know all the posts are good etc I will PM you my exact address for shipping purposes __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

09-28-2011, 09:09 AM	#8
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Parting out--1981 3/4 ton 4x4 Instrument cluster pics... shape?? thanks __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

09-28-2011, 06:27 PM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,850	Re: Parting out--1981 3/4 ton 4x4 Whats that thing hanging off the rear bumper? __________________ 1967custom

09-28-2011, 09:52 PM	#10
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,011	Re: Parting out--1981 3/4 ton 4x4 A clevis. Posted via Mobile Device

10-07-2011, 03:27 AM	#14
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Parting out--1981 3/4 ton 4x4 How nice are the tires on it? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-07-2011, 09:24 AM	#15
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,011	Re: Parting out--1981 3/4 ton 4x4 I am keeping the tires for my 82 Posted via Mobile Device

10-17-2011, 04:24 PM	#16
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: Parting out--1981 3/4 ton 4x4 roll bar price and would you ship it? does it come apart or no? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

10-17-2011, 06:12 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out--1981 3/4 ton 4x4 what kind of shape is dash pad in? Also looking for a good right side taillight with bezel, must be in VG condition (light and chrome trim). thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 10-17-2011 at 06:47 PM.

10-18-2011, 09:13 AM	#18
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,011	Re: Parting out--1981 3/4 ton 4x4 Chris, out of town till late Wednesday. I will look at it Thursday. scott, pad is junk. I will look at the tail light. Would hold your breath on it being really nice though....lol Posted via Mobile Device



Register or Log In To remove these advertisements.

10-19-2011, 10:59 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Parting out--1981 3/4 ton 4x4 also need an auto shifter arm in decent shape, and a tan door storage bag in nice condition thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 10-20-2011 at 03:50 PM.

10-21-2011, 12:35 AM	#20
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Parting out--1981 3/4 ton 4x4 Would you mind popping the cap/rotor off and taking the weights out and telling me the number on the 2 outside weights? Im looking for #41 I would greatly appreciate it!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-21-2011, 10:58 PM	#21
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting out--1981 3/4 ton 4x4 how much for both head light buckets and clips and springs

Register or Log In To remove these advertisements.