GA 292 exhaust manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 10-03-2011, 09:43 PM

pulled from a 65 C-50
292 exhaust manifold , all 3 studs are good. $175 (with or without the intake)
carb $30
t-stat housing $30
script valve cover SOLD
all prices plus shipping

**southern parts** · 10-05-2011, 07:43 PM

ttt

68 IRON · 10-05-2011, 11:22 PM

Very interested in the valve cover. You wouldn't happen to have better pics would ya? Any damage thats not shown? And just in case, could you give me a shipping quote for 98501?

**southern parts** · 10-06-2011, 08:27 PM

here`s a few more pics. it has a small dent on the front corner and a depression at the second e in the script. shipping is about $18

68 IRON · 10-08-2011, 08:22 PM

Sorry it took so long, battling "things" at home.... Tough to tell if it would clean up (pits, dents and the such) Would you consider 30 shipped?

**southern parts** · 12-13-2011, 11:17 PM

valve cover has been sold. lower price on exhaust. ttt

**southern parts** · 12-16-2011, 11:21 PM

ttt

**70STOVEBOLT** · 06-18-2014, 10:02 AM

I know this thread is really old, but do you still have that exhaust manifold? I have a friend with a C50 looking for one. Let me know if you still have it and what you want for it.

Thanks,
Mark

88Ironduke · 06-18-2014, 12:55 PM

Does anyone know if the 292 thermostat housing would fit a 250?

I want to run an electric fan in my truck and need a place to run a fan switch.

Thanks.
88Ironduke

**paulspickupparts** · 06-18-2014, 01:03 PM

The thermostat housing shown is a bypass thermostat housing which would not work with the 250 . Usually the 250 did not have bypass.

88Ironduke · 06-18-2014, 01:09 PM

Thanks

**southern parts** · 06-19-2014, 03:05 PM

all of these are gone but i have another that will need some repair at one of the stud holes. $75 plus shipping

**70STOVEBOLT** · 06-19-2014, 03:45 PM

Can you post a pic of the area that needs repaired?

**southern parts** · 06-19-2014, 03:53 PM

i wont be able to get a picture until sunday.

**70STOVEBOLT** · 06-19-2014, 04:14 PM

Ok, just post it when you get a chance.

**southern parts** · 06-21-2014, 05:29 PM

I have 2 the first one is from a c-60 with 2 1/2" exhaust . it is broken at one of the studs but I have the piece so it can be welded back to it .
the 2nd one is from a 72- 250. it has the 1 3/4" exhaust opening.
$75 plus shipping on either one

10-03-2011, 09:43 PM	#1
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	292 exhaust manifold pulled from a 65 C-50 292 exhaust manifold , all 3 studs are good. $175 (with or without the intake) carb $30 t-stat housing $30 script valve cover SOLD all prices plus shipping Attached Images Last edited by southern parts; 12-13-2011 at 11:19 PM.

10-05-2011, 07:43 PM	#2
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 292 exhaust manifold ttt

10-05-2011, 11:22 PM	#3
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 292 exhaust manifold Very interested in the valve cover. You wouldn't happen to have better pics would ya? Any damage thats not shown? And just in case, could you give me a shipping quote for 98501?

10-06-2011, 08:27 PM	#4
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 292 exhaust manifold here`s a few more pics. it has a small dent on the front corner and a depression at the second e in the script. shipping is about $18 Attached Images

10-08-2011, 08:22 PM	#5
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 292 exhaust manifold Sorry it took so long, battling "things" at home.... Tough to tell if it would clean up (pits, dents and the such) Would you consider 30 shipped?

12-13-2011, 11:17 PM	#6
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 292 exhaust manifold valve cover has been sold. lower price on exhaust. ttt

12-16-2011, 11:21 PM	#7
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 292 exhaust manifold ttt

06-18-2014, 10:02 AM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: 292 exhaust manifold I know this thread is really old, but do you still have that exhaust manifold? I have a friend with a C50 looking for one. Let me know if you still have it and what you want for it. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-18-2014, 12:55 PM	#9
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: 292 exhaust manifold Does anyone know if the 292 thermostat housing would fit a 250? I want to run an electric fan in my truck and need a place to run a fan switch. Thanks. 88Ironduke __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

06-18-2014, 01:03 PM	#10
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 292 exhaust manifold The thermostat housing shown is a bypass thermostat housing which would not work with the 250 . Usually the 250 did not have bypass.

06-18-2014, 01:09 PM	#11
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: 292 exhaust manifold Thanks __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

06-19-2014, 03:05 PM	#12
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 292 exhaust manifold all of these are gone but i have another that will need some repair at one of the stud holes. $75 plus shipping

06-19-2014, 03:45 PM	#13
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: 292 exhaust manifold Can you post a pic of the area that needs repaired? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

06-19-2014, 03:53 PM	#14
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 292 exhaust manifold i wont be able to get a picture until sunday.

06-19-2014, 04:14 PM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,265	Re: 292 exhaust manifold Ok, just post it when you get a chance. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

06-21-2014, 05:29 PM	#16
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: 292 exhaust manifold I have 2 the first one is from a c-60 with 2 1/2" exhaust . it is broken at one of the studs but I have the piece so it can be welded back to it . the 2nd one is from a 72- 250. it has the 1 3/4" exhaust opening. $75 plus shipping on either one Attached Images

Register or Log In To remove these advertisements.