would you guys be intrested in...

[INSIDIOUS '86]

Im thinking of doing some custom interior parts for our trucks and supplying them on the site as a supporting member, I want to gauge intrest in these items before making an investment in making a bunch of parts to sit around

so heres the start off list I have yet to figure out pricing and such but here it is.

1: iroc camaro gauge conversions these will have many otions and form to fit you such as aftermarket oil temp and bat gauges along with a 145mph camaro speedo and a tach/oil or fuel gauge with whiteface gauge decals pre-applied as an option and additional custom colors available at additional cost this will also have a core trade in option as well since this is a complete gauge asembly im also thinking of adding led strip lights as well depending on cost

2: clock knobs that get lost, hand made by me on my lathe

3: door lock knobs, variants so far are hand lathed pistons and 30-06 bullets

4: valve cover hold downs also in bullet and invert bullet and piston design

5: custom upholstered headliner, seude/cloth/vinyl/leather

6: keychains: pistons?
if you have ideas or comments let me know! I have two lathes and a small mill to work with

[C-10 simplex]

What i would be interested in is a place where i could put gauges without drilling---and not in the stock places either because i want to keep those.

So, in other words, a module that could somehow be attached to the dash(or by some other means? I.e., bolt-in center console?) that i could put gauges in.

Examples of stuff that doesn't really work for me:

1) the a pillar gauge cluster things would be nice, but i, with my custom deluxe, DO NOT actually have holes drilled in the a pillars. Yes, that's right---some of us do not have holes drilled in where others do---Silverado/cheyenne etc. (for example).

2) The overhead/visor shelf sold by, (i think?)LMC, looks like a good place where i could put gauges, but again since i have no holes in my A pillars, where/how am i going to route the wires? i don't like using duct tape or velcro for that purpose......

[iceship]

I'm in...... So what would the cost be...

[DREAMER1]

Whether u decide to do a full blown shop or not, count me in. I was wanting to do the whole Iroc conversion myself...with led lights? That's the icing on the cake. Keep me updated, pleez
Posted via Mobile Device

[old Rusty C10]

im all for anyone starting their own business and making something for themselves.. frankly id love to see a guy who could do door panel covers and dash covers and remain in good standing with the administration...ID also be interested in a headline. dopor lock buttons and keychain
Please PM N2trux as he can tell you more about the vendor subscriptions and all

[meter swinger]

Def in for headliner and dash and door panels. Crew cab headliner?
Posted via Mobile Device

[INSIDIOUS '86]

not doing a full blown shop but a low key custom garage is what im running its going to be a while before im in full swing with things in stock but i have to start and get a basline for items and shipping before i put out prices and such.

meter swinger i have yet to try my hand in dashpads and door panels but i do beleive that a crewcab headlinner shouldnt be out of line since our headliner boards are just under a yard wide but im glad to see some interest. right now im trying to prototype some gauges for the 73 up guys cause i dont want to leave them out either

[Your41Plague12]

I'd also like to see what you come out with for standard cab headliners.

[INSIDIOUS '86]

Originally Posted by Your41Plague12

I'd also like to see what you come out with for standard cab headliners.

I can pretty much glue any material up there

[meter swinger]

Originally Posted by INSIDIOUS '86

meter swinger i have yet to try my hand in dashpads and door panels but i do beleive that a crewcab headlinner shouldnt be out of line since our headliner boards are just under a yard wide but im glad to see some interest.

Nice, since i'm just on the other side of the hill, i could swing by and pick one up. I'm sure you could pick up plenty of business. You could also put it out on the facebook sites. Like six wheel custom and 73-87.
Posted via Mobile Device

[sethv]

I would be interested in a Camaro setup! I would love to have the tach/fuel gauge combo

[dmartin1]

you say you have a lathe.

id definately be interested in some knobs,just about all the knobs in the cab.
especially if you could do a special request on a simple but different design?

as in if i got a pic of like a certain bullet or certain shape?IDK if that makes clear sense?


that guage cluster also looks pretty cool,especially if you integrate the led lighting in it.id definately consider it.
im interested in almost any custom interior items.

ill keep an eye on this thread and your others for info on all this.

[INSIDIOUS '86]

Originally Posted by dmartin1

you say you have a lathe.

id definately be interested in some knobs,just about all the knobs in the cab.
especially if you could do a special request on a simple but different design?

as in if i got a pic of like a certain bullet or certain shape?IDK if that makes clear sense?


that guage cluster also looks pretty cool,especially if you integrate the led lighting in it.id definately consider it.
im interested in almost any custom interior items.

ill keep an eye on this thread and your others for info on all this.

yes if you have a pic of somethig I most likely can get it done

[bigsj]

I would be interested in your items for sure.

[dmartin1]

Originally Posted by INSIDIOUS '86

yes if you have a pic of somethig I most likely can get it done

excellent!

[NCTyphoonKid]

those camaro gauges are pretty cool i like them

[INSIDIOUS '86]

some teaser pics of the prototype valvecover studs. whan I have a full set I will post pics on engine these will come with the base aluminum or painted with vht in colors of choice and the bullets clearcoated for longevity of thier shine

[hick]

If your at all interested in a A Pillar Pod piece put my name down

I need to figure out where i am putting my extra gauges for my cummins swap and i REFUSE to mount the to the dash or put holes in my dash... And i do not think i am capable of building my own pod mounts for the pillar

[INSIDIOUS '86]

i will definitly look into the pillar pods for sure

[hick]

Originally Posted by INSIDIOUS '86

i will definitly look into the pillar pods for sure

If you have them ready before March I would be happy to buy the first one and give you my feed back/do a write up on it

[INSIDIOUS '86]

the would prob be grafted in with fiberglass end epoxy then painted to match interior, wonder what would be more popular a single pod or triple pod or just duals?

[hotrod_991]

Originally Posted by INSIDIOUS '86

the would prob be grafted in with fiberglass end epoxy then painted to match interior, wonder what would be more popular a single pod or triple pod or just duals?

I am a 77 guy but would be very interested in an A pillar pod. A tripple one for me. But I ma sure alot of people would want a single pod for like a small tach or just and AF gauge.

[hick]

Triple here as well

[hotrod_991]

I may be wrong but i think i remembe a thread on here awhile back for some one that was thinking about doing A pillar pods for our trucks. Was that you?

[dmartin1]

i hope those bullets dont still have the primers in them.
loaded bullet+primer+ on 200 degree engine =