NJ FS: Edelbrock performer manifold for center bolt heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-13-2011, 12:40 PM

I have a nice Edelbrock performer intake manifold for center bolt heads with very low miles. All holes/threads r good, a good cleaning and it will looks like new. Asking $60 plus the ride.

Thanks
Scott

**ScottH** · 10-13-2011, 08:25 PM

ttt

**ScottH** · 10-14-2011, 09:10 AM

ttt

67gmcstepside · 10-14-2011, 09:49 AM

Scott, would u take 50 with pickup?

**ScottH** · 10-14-2011, 11:14 AM

Yupper I can do that.

67gmcstepside · 10-14-2011, 11:41 AM

Scott, is this the 2101 model, cant see in the pics.

**ScottH** · 10-14-2011, 12:01 PM

Sorry, should have included that in the post.
Its a 2104 model, Summit says: Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore Flange, Chevy, 5.0/5.7L $177.95

67gmcstepside · 10-14-2011, 12:48 PM

Scott I think the 2104 are for GM heads from 77 and up, mine are 70. Not sure why but it seems this wouldnt fir. Sorry for the trouble.

**ScottH** · 10-14-2011, 02:28 PM

Yes, this is for center bolt heads, I believe from 87-95.

**ScottH** · 10-15-2011, 08:14 AM

ttt

**ScottH** · 10-16-2011, 08:54 AM

No one interested for $50 plus the ride?

HeavyMetalChevy · 10-16-2011, 09:12 AM

let me think...got a whole 71 coming in today... check the money and I will more than likely grab.. i would like to powder coat...

**ScottH** · 10-16-2011, 07:05 PM

ttt

**ScottH** · 10-17-2011, 06:07 PM

$50 for a $177 part.....and no interest???

HeavyMetalChevy · 10-17-2011, 08:33 PM

Quote:

Originally Posted by ScottH

$50 for a $177 part.....and no interest???

I agree...Bump for you I would take like stated before but I have a 2101 on my 1966 327 block and a 2401 on my 1988 250 block... See my dilemma

**SOON2BLAZE** · 10-17-2011, 11:56 PM

I'll take it. pm me with shipping to 84737 thanks

**ScottH** · 10-18-2011, 12:35 AM

Will check on shipping tomorrow and PM u the info.

thanks

oldblue1968chevy · 10-18-2011, 11:21 AM

Really good deal for someone looking to go with vortec heads.!!

**ScottH** · 10-18-2011, 06:00 PM

PM sent to soon2blaze

thanks for the bump john

**ScottH** · 10-20-2011, 04:03 PM

sold to soon2blaze

thanks!

Lee H · 10-20-2011, 07:09 PM

Must be the angle of the pictures but that looks like a regular intake, not vortec.
Posted via Mobile Device

**SOON2BLAZE** · 10-20-2011, 07:30 PM

not for vortec heads.

10-13-2011, 12:40 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	FS: Edelbrock performer manifold for center bolt heads I have a nice Edelbrock performer intake manifold for center bolt heads with very low miles. All holes/threads r good, a good cleaning and it will looks like new. Asking $60 plus the ride. Thanks Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-13-2011, 08:25 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 09:10 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 09:49 AM	#4
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: FS: Edelbrock performer manifold for center bolt heads Scott, would u take 50 with pickup?

10-14-2011, 11:14 AM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads Yupper I can do that. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 11:41 AM	#6
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: FS: Edelbrock performer manifold for center bolt heads Scott, is this the 2101 model, cant see in the pics.

10-14-2011, 12:01 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads Sorry, should have included that in the post. Its a 2104 model, Summit says: Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore Flange, Chevy, 5.0/5.7L $177.95 __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 12:48 PM	#8
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: FS: Edelbrock performer manifold for center bolt heads Scott I think the 2104 are for GM heads from 77 and up, mine are 70. Not sure why but it seems this wouldnt fir. Sorry for the trouble.

10-14-2011, 02:28 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads Yes, this is for center bolt heads, I believe from 87-95. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-15-2011, 08:14 AM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-16-2011, 08:54 AM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads No one interested for $50 plus the ride? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-16-2011, 09:12 AM	#12
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: FS: Edelbrock performer manifold for center bolt heads let me think...got a whole 71 coming in today... check the money and I will more than likely grab.. i would like to powder coat... __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-16-2011, 07:05 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-17-2011, 06:07 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads $50 for a $177 part.....and no interest??? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-17-2011, 11:56 PM	#16
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: FS: Edelbrock performer manifold for center bolt heads I'll take it. pm me with shipping to 84737 thanks



Register or Log In To remove these advertisements.

10-18-2011, 12:35 AM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads Will check on shipping tomorrow and PM u the info. thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-18-2011, 11:21 AM	#18
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: FS: Edelbrock performer manifold for center bolt heads Really good deal for someone looking to go with vortec heads.!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-18-2011, 06:00 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads PM sent to soon2blaze thanks for the bump john __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-20-2011, 04:03 PM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: FS: Edelbrock performer manifold for center bolt heads sold to soon2blaze thanks! __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-20-2011, 07:09 PM	#21
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,142	Re: FS: Edelbrock performer manifold for center bolt heads Must be the angle of the pictures but that looks like a regular intake, not vortec. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

10-20-2011, 07:30 PM	#22
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: FS: Edelbrock performer manifold for center bolt heads not for vortec heads.

Register or Log In To remove these advertisements.