KS Eaton 3/4 ton No-spin center section - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bucket · 10-16-2011, 03:37 PM

I believe i to be a 4:10 as it had about 4 revolutions on the drive shaft to 1 on the wheels. $300 plus shipping. Shipping is going to be about 150 to 160. This sucker weighs 111 pounds!

webfoot · 10-16-2011, 06:29 PM

Since its visible there should be a ratio stamped somewhere on the side of the gear. As an example a 4:10 could be stamped 41:10. (example only because I don't know how many teeth are on the pinion.)

Ozark Tim · 10-17-2011, 05:06 PM

I am interested.
Sending you a pm

bucket · 01-27-2012, 01:14 PM

ttt..

Shaun1162 · 03-23-2012, 09:15 PM

Still have it?

bucket · 03-25-2012, 12:46 PM

Quote:

Originally Posted by Shaun1162

Still have it?

yes, i still have it.

bucket · 08-17-2012, 01:15 PM

ttt

bucket · 08-27-2012, 05:22 PM

How about $250? No shipping.

71suburban/70CST · 08-27-2012, 08:17 PM

I would be like to be in line for this. Shipping but only the carrier, no outter or gears.
Thanks,
Justin

bucket · 08-28-2012, 01:40 PM

Quote:

Originally Posted by 71suburban/70CST

I would be like to be in line for this. Shipping but only the carrier, no outter or gears.
Thanks,
Justin

OK. Sending PM.

10-16-2011, 03:37 PM	#1
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Eaton 3/4 ton No-spin center section I believe i to be a 4:10 as it had about 4 revolutions on the drive shaft to 1 on the wheels. $300 plus shipping. Shipping is going to be about 150 to 160. This sucker weighs 111 pounds! Attached Images __________________ 79 K10 77 MGB 79 Kawasaki KZ1000

10-16-2011, 06:29 PM	#2
webfoot Registered User Join Date: Nov 2007 Location: Hermiston, OR Posts: 947	Re: Eaton 3/4 ton No-spin center section Since its visible there should be a ratio stamped somewhere on the side of the gear. As an example a 4:10 could be stamped 41:10. (example only because I don't know how many teeth are on the pinion.) __________________ *Running in place gets you nowhere fast.* -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC.

10-17-2011, 05:06 PM	#3
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Eaton 3/4 ton No-spin center section I am interested. Sending you a pm

01-27-2012, 01:14 PM	#4
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: Eaton 3/4 ton No-spin center section ttt.. __________________ 79 K10 77 MGB 79 Kawasaki KZ1000

03-23-2012, 09:15 PM	#5
Shaun1162 Registered User Join Date: Aug 2010 Location: NH Posts: 368	Re: Eaton 3/4 ton No-spin center section Still have it? __________________ - 2010 Silverado - 1984 Chevy M1028 (K-30) - 1969 Chevy C-30 - 1933 Ford Stock Car

08-17-2012, 01:15 PM	#7
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: Eaton 3/4 ton No-spin center section ttt __________________ 79 K10 77 MGB 79 Kawasaki KZ1000

08-27-2012, 05:22 PM	#8
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: Eaton 3/4 ton No-spin center section How about $250? No shipping. __________________ 79 K10 77 MGB 79 Kawasaki KZ1000

08-27-2012, 08:17 PM	#9
71suburban/70CST Registered User Join Date: Feb 2010 Location: Chestertown, Md Posts: 102	Re: Eaton 3/4 ton No-spin center section I would be like to be in line for this. Shipping but only the carrier, no outter or gears. Thanks, Justin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.