![]() |
|
|
#1 |
|
Registered User
Join Date: Apr 2010
Location: South Florida
Posts: 182
|
heater hose question
guys,
i want to put the heater hoses back on my 1990 K-1500 4x4 5.7 truck. does it matter which hose i put on which nipple on the firewall ? one hose comes from the rear of the intake manifold and the other comes from the radiator. thanks guys
__________________
http://s251.photobucket.com/albums/g...G/1957%203100/ |
|
|
|
|
|
#2 |
|
One day...
![]() Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
|
Re: heater hose question
Dont really think it matters, i have always done the top one to the manifold but im not sure why
|
|
|
|
|
|
#3 |
|
Chevys Kick A$$
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
|
Re: heater hose question
Yea on my '88 the top one goes to the intake manifold and the bottom one goes to the top on the radiator. Pretty sure the '91 I have is the same way as well.
__________________
*HOODS is what I answer too* -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit ![]() -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER ![]() I would rather push a Chevy then drive a ford!!
|
|
|
|
|
|
#4 |
|
Registered User
Join Date: Apr 2010
Location: South Florida
Posts: 182
|
Re: heater hose question
thanks guys.... my nipples from the firewall are side by side. i found out the smaller diameter, 5/8 hose goes from the radiator to the left 5/8 nipple, and the 3/4 hose from the right nipple to the intake.
thanks again
__________________
http://s251.photobucket.com/albums/g...G/1957%203100/ |
|
|
|
![]() |
| Bookmarks |
|
|