Vent widows hit inside door when open all the way - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RShaips · 10-21-2011, 07:57 PM

I rebuilt my vent windows, what a pain. Now when I open my vent window all the way it hits the door on the inside before it opens 100%. It needs to be a little bit higher but I see no way to raise it. I opened it all the way and chipped my new paint!

**lolife99** · 10-21-2011, 08:29 PM

I'm not sure what is going on.
Can you posts some pics?

**oldgold70c10** · 10-21-2011, 08:34 PM

My driver side vent window does this too after I rebuilt it. So, I took a long hard look at the condition of the pass side & didn't rebuild it.

RShaips · 10-21-2011, 10:48 PM

Yea I hear ya. After doing both of mine I would do it different next time and just use a rivet gun. It would be much quicker and easier.

**lolife99** · 10-21-2011, 11:20 PM

Quote:

Originally Posted by RShaips

Yea I hear ya. After doing both of mine I would do it different next time and just use a rivet gun. It would be much quicker and easier.

How did you rivet the gaskets in place?

RShaips · 10-22-2011, 01:32 PM

With a hammer, vise and stupid tool that comes with the kit.

10-21-2011, 07:57 PM	#1
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Vent widows hit inside door when open all the way I rebuilt my vent windows, what a pain. Now when I open my vent window all the way it hits the door on the inside before it opens 100%. It needs to be a little bit higher but I see no way to raise it. I opened it all the way and chipped my new paint!

10-21-2011, 08:29 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,690	Re: Vent widows hit inside door when open all the way I'm not sure what is going on. Can you posts some pics? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-21-2011, 08:34 PM	#3
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,026	Re: Vent widows hit inside door when open all the way My driver side vent window does this too after I rebuilt it. So, I took a long hard look at the condition of the pass side & didn't rebuild it. __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

10-21-2011, 10:48 PM	#4
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Vent widows hit inside door when open all the way Yea I hear ya. After doing both of mine I would do it different next time and just use a rivet gun. It would be much quicker and easier.

10-22-2011, 01:32 PM	#6
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Vent widows hit inside door when open all the way With a hammer, vise and stupid tool that comes with the kit.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.