New toy brings me to this area!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Indian113 · 10-22-2011, 08:14 PM

I usually spend most of my time in the 60-66 area but today I traded for a 92 S10. I'll post pictures Sunday after I take them. It is built 327 with a 700R4 and 4:10 gears. The guy I got it from say's it ran mid 8's at the local 1/8 th mile. My goal is to make it more streetable and take it on the Hot Rod Power Tour this year. Ray

ProStreet68SB · 10-22-2011, 09:15 PM

Cant wait to see pictures!!!

Indian113 · 10-23-2011, 01:57 PM

as promised

Indian113 · 10-23-2011, 01:59 PM

a few more

Indian113 · 10-23-2011, 02:05 PM

that's all-I like a lot of it but there are some things I want to change
1-going back to a streetable gear in rear
2-gas gauge,it has none now and I WANT ONE!!!!
3-Change rear wheels, try to tuck them in more-need different offsets
4-might get rid of the bottle,I have awife with heavy FOOT

5-try to put air conditioning in,want to go on HOT ROD POWER TOUR
There might be a few more after I get used to it
I still have the 64 C10 so I'll be popping in and out this section
Later Ray

**Warrens69GMC** · 10-23-2011, 04:09 PM

305 vortec heads?

Indian113 · 10-23-2011, 04:31 PM

They are Vortec heads,he is sending me a build sheet on motor I don't know the difference between 305 and 350 heads.

BarryB · 10-23-2011, 04:58 PM

For A/c find a 4.3 truck and yank all the guts from it. Should be just a swap out. And then you can take the serpentine belt system put it on your motor. My 91 has factory air and this is what I plan to do to mine, when I V8 it.
either way thats a sharp looking truck.

ProStreet68SB · 10-23-2011, 06:57 PM

Looks awesome man!

How much spray? What size tire is on the rear right now?

Indian113 · 10-23-2011, 08:31 PM

It's a 150 hp Nos kit,it has 275/60-15 Drag Radial BFG on 10in. Weld Rims

geezer#99 · 10-23-2011, 09:13 PM

Nice looking truck but a thought comes up. How did it pass tech at the strip with that low gas tank. Looks quite low. Close to the scrub line. JMHO

Indian113 · 10-23-2011, 10:47 PM

It is close but the first picture I posted of it shows a side shot and the Fuel cell is above the scrub line. If I had done it I might have just mounted in the bed and not have it hang down like that.

chevyndn · 10-24-2011, 12:11 AM

man thats a sweet looking truck!!!!

**Dieselwrencher** · 10-24-2011, 12:39 AM

Ray that little pick up is pretty dang nice! Definitely worthy of the trade. I wouldn't feel bad a bit. Hey, now you can drive to GTG's when it gets cool. You got side windows buddy!

Indian113 · 10-24-2011, 08:46 AM

Ryan,it seems a little strange to go out to the garage and not see my bike!! I've had it for 7 years it was time to move on. I've started another one anyway

This one will have a windshield I'm tired of eating BUGS!! I don't like that Quicksilver shifter at all.
Barry, I was thinking about a underdash unit for air- I don't know if it will fit with out cutting some of the package tray out though.
There is no E-brake on it with the set up it has now,may go with a driveshaft one?
Thanks for all the comments. It's a hoot to drive-actually a Handfull

Not as much room as the 64,a little lower,a little louder, a lot FASTER

Damien · 10-24-2011, 11:39 AM

Serpentine belts are not going to work with the short water pump.
A radiator hose for a '78 impala with a v8 can be cut to fit in place of your two piece upper hose.

Indian113 · 10-24-2011, 11:42 AM

Thanks Damien! I'll try that hose this winter. I was going to use a piece of Stainless Pipe and make it at least prettier!

**oldman3** · 10-24-2011, 11:23 PM

Ray, nice find, truck looks great. I will subscribe so I can keep up with the changes, catch you later....Jim

likaroc13 · 10-26-2011, 10:03 PM

nice truck, & good luck with it...good to see a fellow 60-66'er in here too

72BlckButy · 10-26-2011, 10:32 PM

Ray... that thing is sick!!!!!

Indian113 · 10-27-2011, 07:27 AM

Thanks for the comments, I really like it so far.

likearoc13,the 64 is my wife's! All I get to do is wrench on it! She lets me drive it once in a while. Anything I do to it has to be approved by her first. Gotta love having a gearhead for a wife.

Nate,Thanks I have ordered a gas gauge and sending unit. I have a set of 3:42's to replace the 4:10's with. I have a guy who wants to buy my wheels,if he does I can get some that tuck under the truck better and get some tires that will let me drive on the highway.

my neighbor asked me "What are you gonna haul in that?" I told him "A**"

likaroc13 · 10-27-2011, 09:48 PM

Quote:

Originally Posted by Indian113

likearoc13,the 64 is my wife's! All I get to do is wrench on it! She lets me drive it once in a while. Anything I do to it has to be approved by her first. Gotta love having a gearhead for a wife.

that's so cool...i can't say the same for my wife, but she does tag along with me to most cruise-in's and shows

chevy2racr · 10-29-2011, 09:04 AM

i used 4.3 brackets on mine thinking I was gonna put A/C back in it, running a bypass pulley right now... but I like having the factory type belt setup, made it simpler... I moved my radiator forward though and gave me more room out front but its all still tight. wish I woulda wrapped my headers too! oh well, nice truck though! I need to get my tranny issues worked out and maybe cruze your way..

mine looks stock though... just dont sound stock....

Indian113 · 10-29-2011, 10:12 AM

Chevy2racr,Your truck looks like a real sleaper! I imagine the lope gives it away

Come on down anytime-coffee's always on,we keep soda's in the house too if ya want

Indian113 · 10-29-2011, 10:20 AM

I got my gas gauge today,waiting on sending unit and gauge cup. I bought some new rear tires for it Hankook 295/50-15 not to expensive so I won't mind spinning them a litttle

I'm changing the rear end Thursday back to the 3:42's, I still hate that B&M quicksiver!!!

I tried driving it at nite-headlight covers SUCK

It's a pain in the A** to put gas in it, you have to unsnap the tarp to open up tailgate.

10-22-2011, 08:14 PM	#1
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	New toy brings me to this area!! I usually spend most of my time in the 60-66 area but today I traded for a 92 S10. I'll post pictures Sunday after I take them. It is built 327 with a 700R4 and 4:10 gears. The guy I got it from say's it ran mid 8's at the local 1/8 th mile. My goal is to make it more streetable and take it on the Hot Rod Power Tour this year. Ray

10-22-2011, 09:15 PM	#2
ProStreet68SB The Engine Whisperer Join Date: Sep 2006 Location: Ohio Posts: 770	Re: New toy brings me to this area!! Cant wait to see pictures!!!

10-23-2011, 01:57 PM	#3
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! as promised Attached Images

10-23-2011, 01:59 PM	#4
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! a few more Attached Images

10-23-2011, 02:05 PM	#5
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! that's all-I like a lot of it but there are some things I want to change 1-going back to a streetable gear in rear 2-gas gauge,it has none now and I WANT ONE!!!! 3-Change rear wheels, try to tuck them in more-need different offsets 4-might get rid of the bottle,I have awife with heavy FOOT 5-try to put air conditioning in,want to go on HOT ROD POWER TOUR There might be a few more after I get used to it I still have the 64 C10 so I'll be popping in and out this section Later Ray Attached Images

10-23-2011, 04:09 PM	#6
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,625	Re: New toy brings me to this area!! 305 vortec heads? __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

10-23-2011, 04:31 PM	#7
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! They are Vortec heads,he is sending me a build sheet on motor I don't know the difference between 305 and 350 heads.

10-23-2011, 04:58 PM	#8
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: New toy brings me to this area!! For A/c find a 4.3 truck and yank all the guts from it. Should be just a swap out. And then you can take the serpentine belt system put it on your motor. My 91 has factory air and this is what I plan to do to mine, when I V8 it. either way thats a sharp looking truck. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

10-23-2011, 06:57 PM	#9
ProStreet68SB The Engine Whisperer Join Date: Sep 2006 Location: Ohio Posts: 770	Re: New toy brings me to this area!! Looks awesome man! How much spray? What size tire is on the rear right now?

10-23-2011, 08:31 PM	#10
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! It's a 150 hp Nos kit,it has 275/60-15 Drag Radial BFG on 10in. Weld Rims

10-23-2011, 09:13 PM	#11
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,735	Re: New toy brings me to this area!! Nice looking truck but a thought comes up. How did it pass tech at the strip with that low gas tank. Looks quite low. Close to the scrub line. JMHO

10-23-2011, 10:47 PM	#12
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! It is close but the first picture I posted of it shows a side shot and the Fuel cell is above the scrub line. If I had done it I might have just mounted in the bed and not have it hang down like that.

10-24-2011, 12:11 AM	#13
chevyndn Registered User Join Date: Jan 2009 Location: independence mo. Posts: 176	Re: New toy brings me to this area!! man thats a sweet looking truck!!!!

10-24-2011, 12:39 AM	#14
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: New toy brings me to this area!! Ray that little pick up is pretty dang nice! Definitely worthy of the trade. I wouldn't feel bad a bit. Hey, now you can drive to GTG's when it gets cool. You got side windows buddy! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-24-2011, 08:46 AM	#15
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! Ryan,it seems a little strange to go out to the garage and not see my bike!! I've had it for 7 years it was time to move on. I've started another one anyway This one will have a windshield I'm tired of eating BUGS!! I don't like that Quicksilver shifter at all. Barry, I was thinking about a underdash unit for air- I don't know if it will fit with out cutting some of the package tray out though. There is no E-brake on it with the set up it has now,may go with a driveshaft one? Thanks for all the comments. It's a hoot to drive-actually a Handfull Not as much room as the 64,a little lower,a little louder, a lot FASTER



Register or Log In To remove these advertisements.

10-24-2011, 11:39 AM	#16
Damien Registered User Join Date: Mar 2007 Location: Farmington, MN Posts: 928	Re: New toy brings me to this area!! Serpentine belts are not going to work with the short water pump. A radiator hose for a '78 impala with a v8 can be cut to fit in place of your two piece upper hose. __________________ I can still count my vehicles on two... wait three hands.

10-24-2011, 11:42 AM	#17
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! Thanks Damien! I'll try that hose this winter. I was going to use a piece of Stainless Pipe and make it at least prettier!

10-24-2011, 11:23 PM	#18
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: New toy brings me to this area!! Ray, nice find, truck looks great. I will subscribe so I can keep up with the changes, catch you later....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-26-2011, 10:03 PM	#19
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: New toy brings me to this area!! nice truck, & good luck with it...good to see a fellow 60-66'er in here too __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

10-26-2011, 10:32 PM	#20
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: New toy brings me to this area!! Ray... that thing is sick!!!!! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-27-2011, 07:27 AM	#21
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! Thanks for the comments, I really like it so far. likearoc13,the 64 is my wife's! All I get to do is wrench on it! She lets me drive it once in a while. Anything I do to it has to be approved by her first. Gotta love having a gearhead for a wife. Nate,Thanks I have ordered a gas gauge and sending unit. I have a set of 3:42's to replace the 4:10's with. I have a guy who wants to buy my wheels,if he does I can get some that tuck under the truck better and get some tires that will let me drive on the highway. my neighbor asked me "What are you gonna haul in that?" I told him "A**"

10-29-2011, 09:04 AM	#23
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Re: New toy brings me to this area!! i used 4.3 brackets on mine thinking I was gonna put A/C back in it, running a bypass pulley right now... but I like having the factory type belt setup, made it simpler... I moved my radiator forward though and gave me more room out front but its all still tight. wish I woulda wrapped my headers too! oh well, nice truck though! I need to get my tranny issues worked out and maybe cruze your way.. mine looks stock though... just dont sound stock.... Attached Images __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

10-29-2011, 10:12 AM	#24
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! Chevy2racr,Your truck looks like a real sleaper! I imagine the lope gives it away Come on down anytime-coffee's always on,we keep soda's in the house too if ya want

10-29-2011, 10:20 AM	#25
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: New toy brings me to this area!! I got my gas gauge today,waiting on sending unit and gauge cup. I bought some new rear tires for it Hankook 295/50-15 not to expensive so I won't mind spinning them a litttle I'm changing the rear end Thursday back to the 3:42's, I still hate that B&M quicksiver!!! I tried driving it at nite-headlight covers SUCK It's a pain in the A** to put gas in it, you have to unsnap the tarp to open up tailgate.

Register or Log In To remove these advertisements.