Bench seats? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

74baggedbug · 10-24-2011, 11:14 PM

Any one know whats the size/ thread pitch for the bolts that mount the bench seat to the floor? Thanks ... Going back with stock bench seat and the PO threw some cheesy dodge bucket seats in without bolting them down
Posted via Mobile Device

TobyArnot · 10-25-2011, 07:33 AM

Bolt are 5/16-18 hex washer head with point. Same as used in various places around front end (inner fenders, etc. ) Most any 5/16-18 x 1-1/4" long will do nicely.
.
http://www.mcmaster.com/#cadinlnord/92316a585/=en5ona - not pointed but would work!
.
Good Luck

10-24-2011, 11:14 PM	#1
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Bench seats? Any one know whats the size/ thread pitch for the bolts that mount the bench seat to the floor? Thanks ... Going back with stock bench seat and the PO threw some cheesy dodge bucket seats in without bolting them down Posted via Mobile Device

10-25-2011, 07:33 AM	#2
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Re: Bench seats? Bolt are 5/16-18 hex washer head with point. Same as used in various places around front end (inner fenders, etc. ) Most any 5/16-18 x 1-1/4" long will do nicely. . http://www.mcmaster.com/#cadinlnord/92316a585/=en5ona - not pointed but would work! . Good Luck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.