67-72's with non-chevy engines - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69C-owner · 10-25-2011, 09:42 PM

So what do you boys have under your hood?
Posted via Mobile Device

fishingjred73 · 10-25-2011, 10:20 PM

Not under the hood yet but when I'm done with my 68 it'll have a 460 Ford BB backed by a C6 tranny and 9" rearend.

**Dieselwrencher** · 10-25-2011, 11:25 PM

Well......................

This is what's going back in my 72 Longhorn.

Except with one more turbo.

Longhorn Man · 10-25-2011, 11:31 PM

got a cad big block in my longhorn

**special-K** · 10-26-2011, 06:51 AM

I'm picking up four Pontiac 389s next week. I'd like to rebuild one for my nostalgic hot truck '67 GMC project.

ChevLoRay · 10-26-2011, 11:02 AM

If I could, I'd be a Ponti-Yakker, too.

Loved my 389 in my '64 Bonneville. Could it have been the Hydramatic?

My ex-brother in law had a bored/stroked 421 in a '55 Bel Air 2-dr sedan that was plumb nasty.

GASoline71 · 10-26-2011, 12:27 PM

I got a line on a Buick 425 "nailhead".

Gary

69C-owner · 10-26-2011, 03:32 PM

A 350 Pontiac is turnin my tires, I think its cool being different
Posted via Mobile Device

stomper · 10-26-2011, 04:40 PM

Dieselwrencher,

What is the Cummins sitting in!?

*project 67 sub* · 10-26-2011, 06:02 PM

its in his vette

72cummins · 10-26-2011, 06:44 PM

96 model 12Valve cummins here.

**Dieselwrencher** · 10-26-2011, 08:32 PM

Quote:

Originally Posted by project 67 sub

its in his vette

Yep.

It was in my 68 corvette. Seeing how everything here in the winter likes to flash rust from sitting, bare metal wise, I'm not taking the chance of my new engine rusting away. So, I'm taking the engine and trans that's for the vette, and putting it in the Longhorn. Big Burn Outs!

69C-owner · 10-31-2011, 01:23 AM

Did the vette run with the cummins in it? That would be cool
Posted via Mobile Device

Pont406 · 10-31-2011, 01:46 AM

i have a pontiac 400 for now in 69 c10. 461 is ready to goin but I need to found some headers for different heads now. It's getting closer. Some pics and last shows how tight it's with a smaller headers.

**Dieselwrencher** · 10-31-2011, 07:27 PM

Quote:

Originally Posted by 69C-owner

Did the vette run with the cummins in it? That would be cool
Posted via Mobile Device

Yes it did. You can go here and check it out.

http://www.lowbudgetdiesel.com/Cumminscorvette.html

66skylarkpost · 10-31-2011, 08:49 PM

heres my ol '72 shortstep from this last weekend as i was tearing it down . im changing cabs and clip/painting it over winter .i have the orignal buildup here on the board somewhere from 6 years ago. i plan on startin a new build thread .anyways, i ran the stock 4 speed via adapter plate and centerforce clutch up until this spring where i put in a 400 turbo . oh yeah , its a 1973 riviera 455 BUICK with a few mods

69C-owner · 11-02-2011, 12:57 AM

The Vette looked awesome, does anybody know of a good pair of headers that will fit in my truck? Its a 69 with a Pontiac 350 and special-K wanna let go of one of those 389's?
Posted via Mobile Device

Pont406 · 11-02-2011, 01:33 AM

69c-owner, get a set of tri-tube headers. almost a direct fit, or cheap Summit $99 second gen firebird headers.

**special-K** · 11-02-2011, 07:42 AM

Quote:

Originally Posted by Pont406

69c-owner, get a set of tri-tube headers. almost a direct fit, or cheap Summit $99 second gen firebird headers.

Tri-Ys for what application? I'll need a set when I get a 389 built.

**Dieselwrencher** · 11-02-2011, 12:20 PM

Quote:

Originally Posted by 69C-owner

The Vette looked awesome, does anybody know of a good pair of headers that will fit in my truck? Its a 69 with a Pontiac 350 and special-K wanna let go of one of those 389's?
Posted via Mobile Device

Thanks.

**Dieselwrencher** · 11-02-2011, 12:21 PM

Pont406, that chief engine looks sweet in there!

69C-owner · 12-05-2011, 12:57 AM

Got the Pontiac hummin earlier, sounded good, fealt really good to start it, gotta pump the tank and fill it with new gas, she's been sittin a few years, havent had time or money to tinker with the old truck, only dreams till now, well still dreams but at least im makin some headway

10-25-2011, 09:42 PM	#1
69C-owner Registered User Join Date: Dec 2010 Location: Apison Tn Posts: 490	67-72's with non-chevy engines So what do you boys have under your hood? Posted via Mobile Device __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=43855069 LWB Fleet 1994 Buick Roadmaster 1994 GMC Sonoma

10-25-2011, 10:20 PM	#2
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 812	Re: 67-72's with non-chevy engines Not under the hood yet but when I'm done with my 68 it'll have a 460 Ford BB backed by a C6 tranny and 9" rearend. __________________ James '68 Stepside (ground up in progress) My 68 build thread http://louisianaclassictruckclub.fre...side-t956.html '81 SWB "Pap paw" (Driver) The 81 build thread http://louisianaclassictruckclub.fre...-swb-t960.html Member of www.louisianaclassictruckclub.com https://www.facebook.com/groups/296290610747732/

10-25-2011, 11:25 PM	#3
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 67-72's with non-chevy engines Well...................... This is what's going back in my 72 Longhorn. Except with one more turbo. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-25-2011, 11:31 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 67-72's with non-chevy engines got a cad big block in my longhorn

10-26-2011, 06:51 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67-72's with non-chevy engines I'm picking up four Pontiac 389s next week. I'd like to rebuild one for my nostalgic hot truck '67 GMC project. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-26-2011, 11:02 AM	#6
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: 67-72's with non-chevy engines If I could, I'd be a Ponti-Yakker, too. Loved my 389 in my '64 Bonneville. Could it have been the Hydramatic? My ex-brother in law had a bored/stroked 421 in a '55 Bel Air 2-dr sedan that was plumb nasty. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

10-26-2011, 03:32 PM	#8
69C-owner Registered User Join Date: Dec 2010 Location: Apison Tn Posts: 490	Re: 67-72's with non-chevy engines A 350 Pontiac is turnin my tires, I think its cool being different Posted via Mobile Device __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=43855069 LWB Fleet 1994 Buick Roadmaster 1994 GMC Sonoma

10-26-2011, 04:40 PM	#9
stomper Junior Member Join Date: Jul 2002 Location: Scottsdale, AZ Posts: 1,701	Re: 67-72's with non-chevy engines Dieselwrencher, What is the Cummins sitting in!? __________________ "I was patina when patina wasn't cool." 1973 Cheyenne SWB Sunset Gold / Frost White / Saddle

10-26-2011, 06:02 PM	#10
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 67-72's with non-chevy engines its in his vette

10-26-2011, 06:44 PM	#11
72cummins Registered User Join Date: Oct 2011 Location: Great Falls, MT Posts: 15	Re: 67-72's with non-chevy engines 96 model 12Valve cummins here. __________________ Bryce 1972 Chevy K20 powered by an inline 6

10-31-2011, 01:23 AM	#13
69C-owner Registered User Join Date: Dec 2010 Location: Apison Tn Posts: 490	Re: 67-72's with non-chevy engines Did the vette run with the cummins in it? That would be cool Posted via Mobile Device __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=43855069 LWB Fleet 1994 Buick Roadmaster 1994 GMC Sonoma

10-31-2011, 01:46 AM	#14
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Re: 67-72's with non-chevy engines i have a pontiac 400 for now in 69 c10. 461 is ready to goin but I need to found some headers for different heads now. It's getting closer. Some pics and last shows how tight it's with a smaller headers. Attached Images

10-31-2011, 08:49 PM	#16
66skylarkpost Registered User Join Date: Mar 2006 Location: kearney,nebraska Posts: 443	Re: 67-72's with non-chevy engines heres my ol '72 shortstep from this last weekend as i was tearing it down . im changing cabs and clip/painting it over winter .i have the orignal buildup here on the board somewhere from 6 years ago. i plan on startin a new build thread .anyways, i ran the stock 4 speed via adapter plate and centerforce clutch up until this spring where i put in a 400 turbo . oh yeah , its a 1973 riviera 455 BUICK with a few mods Attached Images __________________ '70 k-10 longbox- mid 70's drivetrain 350/350 487x heads 10.1:1 flowmasters ,35's 3.73's auburn posi ,rear shackle flip. '72 short stepside U.S. forestry truck, '73 455 buick,400 turbo,dropped 2"-4 1/4" ,3.07 posi,:'89 silverado 1500 ,OK truck ,5.7 holley tbi ,trick 700r4 3.07 auburn posi ,and my '66 skylark ,'73 centurion and my '84 monte carlo imca stock car

11-02-2011, 12:57 AM	#17
69C-owner Registered User Join Date: Dec 2010 Location: Apison Tn Posts: 490	Re: 67-72's with non-chevy engines The Vette looked awesome, does anybody know of a good pair of headers that will fit in my truck? Its a 69 with a Pontiac 350 and special-K wanna let go of one of those 389's? Posted via Mobile Device __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=43855069 LWB Fleet 1994 Buick Roadmaster 1994 GMC Sonoma

11-02-2011, 01:33 AM	#18
Pont406 Registered User Join Date: Aug 2007 Location: West Hills, California Posts: 679	Re: 67-72's with non-chevy engines 69c-owner, get a set of tri-tube headers. almost a direct fit, or cheap Summit $99 second gen firebird headers. Attached Images



Register or Log In To remove these advertisements.

11-02-2011, 12:21 PM	#21
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 67-72's with non-chevy engines Pont406, that chief engine looks sweet in there! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

12-05-2011, 12:57 AM	#22
69C-owner Registered User Join Date: Dec 2010 Location: Apison Tn Posts: 490	Re: 67-72's with non-chevy engines Got the Pontiac hummin earlier, sounded good, fealt really good to start it, gotta pump the tank and fill it with new gas, she's been sittin a few years, havent had time or money to tinker with the old truck, only dreams till now, well still dreams but at least im makin some headway __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=43855069 LWB Fleet 1994 Buick Roadmaster 1994 GMC Sonoma

Register or Log In To remove these advertisements.