What did you get done 10/30/2011 spooktacular halloween edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 10-30-2011, 10:22 PM

have at it all ill post later!

st1 · 10-30-2011, 10:32 PM

I was able to get my junkyard speakers properly mounted and switched out all my zipties under the hood.

Who needs luck when you have zipties and vice grips?

J Knight · 10-30-2011, 10:35 PM

Went to work this morning and fired up my Pete and its got a dead miss in a $25000 Cat motor. Got to take it to the shop tomorrow and thats got me more scared than any trick or treater right now.

Jonboy · 10-30-2011, 10:44 PM

I found a car on ebay a couple of weeks ago, just randomly searching. I called the owner to see what it would take to buy it, and he wanted to let the auction ride. It didn't clear reserve, so I just left it at that. I was looking at the auction to see where it ended, and my wife saw it. She told me if I wanted it, offer a little more and go get it. So that's exactly what I did.

Friday night, I flew to Atlanta, stayed the night, and caught a ride over to Canton, GA where the car was. About an hour later, I was driving my one owner, 73K mile 1990 Lincoln Mark VII LSC SE home. I have had quite a few of these cars, and have always wanted a black SE. It made the 800 mle drive home with no issues, and got over 22 MPG at 80 the whole way. I haven't fallen in love with the Impala that I bought to drive everyday, so I am on the fence to use this car everyday, or hang on to the Impala and save this one.

Kerlijah · 10-31-2011, 01:18 AM

I blacked out my taillights and side markers...just a thin coat of rattle can black, followed by clear. Looks pretty good, and still plenty bright. Works for me!

S10Fan · 10-31-2011, 09:55 AM

Saturday was rainy and cool so I worked on my couch posture. Sunday was yard work and juggle around my fleet. Needed to get my Chevelle in the garage for some gaskets, intake and valve cover and a general cleaning. Since I had everything moved around I decided to grab a quick family photo......

I should have cut my grass before the picture was taken! LOL! Kind of like your kid getting a school picture without combing their hair.

**Palf70Step** · 10-31-2011, 12:30 PM

I just drove the 83 this weekend hauling stuff from Home Depot & Lowes. Still getting stuff to gether for the engine swap.

Love your fleet Bryan!!!!

TJBrown · 10-31-2011, 03:28 PM

Worked on a lt of stuff this weekend. Started off with a trip to the u pull it park. Made a list and went to town.

Stuff i got done.

1. reconnected all wiring for the wipers (was cut for some reason)
2. New locks for the doors and ingition (all keyed the same)
3. Installed new carpet from Classic Industries
4. Installed new bench seat cover from Classic industries
5. Dyed Kick Panels black.
6. Installed new Speedo cable and found out the driven gear is actually broke.
7. Installed new bumpers on the tail gate.

Worked on installing a Classic industries Dash but got a little frustrated and put it away and grabbed a beer or 3.

camshaftgsxr · 10-31-2011, 03:30 PM

i had a coffin i was going to paint black and put a bloody ford logo on and park outside my grandmas house with it propped up in the bed but i couldnt afford new tires in time

Tex_50613 · 10-31-2011, 03:41 PM

filled my tailgate and relocated the handle

S10Fan · 10-31-2011, 04:26 PM

Quote:

Originally Posted by Palf70Step

Love your fleet Bryan!!!!

Thanks!!

trout · 10-31-2011, 04:46 PM

Quote:

Originally Posted by S10Fan

Saturday was rainy and cool so I worked on my couch posture. Sunday was yard work and juggle around my fleet. Needed to get my Chevelle in the garage for some gaskets, intake and valve cover and a general cleaning. Since I had everything moved around I decided to grab a quick family photo......

I should have cut my grass before the picture was taken! LOL! Kind of like your kid getting a school picture without combing their hair.

that adds charactor with the grass kool pic

Low84 · 10-31-2011, 07:14 PM

Had a friend that wanted me to take place in his wedding caravan, and I spent Saturday from 7am -1pm buffing and polishing and then about another two or so hours cleaning it to have it ready by 4:30 Still need to clean out the small creases but car didn't look to bad I think:

motornut · 10-31-2011, 10:16 PM

got it running after finding a broken dizzy cap
new plugs ,wires,cap
still running with no inner fenders....makes for an ez tune up lol
picked up new 14 fender bolts and nuts....$23.00

Redcap · 10-31-2011, 10:40 PM

Had the absolute pleasure of some guy wrecking my truck today. It isn't real bad, but the driver's frame horn is tweaked and it only turns one direction.

J Knight · 10-31-2011, 11:10 PM

Quote:

Originally Posted by Redcap

Had the absolute pleasure of some guy wrecking my truck today. It isn't real bad, but the driver's frame horn is tweaked and it only turns one direction.

*78 Chevyrado* · 11-01-2011, 10:22 AM

Got the new Alternator and Pulleys put on.

Also got another carb and Fuel Regulator. no pics as it looks exactly as it did before.

Motodrew · 11-01-2011, 10:51 AM

Got my Challenger steering wheel mounted up!

baclay9 · 11-01-2011, 02:56 PM

Got the cab, hood, fenders, and a bunch of odds and ends ready for a trip to the media blaster.

By claypool782 at 2011-10-31
Posted via Mobile Device

notyo_cheez · 11-01-2011, 03:29 PM

Pulled the '81 seat out, looked at the donor from a '93 and was rudely awakened. Time to get creative. I want head rests on a bench.

**Palf70Step** · 11-01-2011, 03:37 PM

Quote:

Originally Posted by notyo_cheez

Pulled the '81 seat out, looked at the donor from a '93 and was rudely awakened. Time to get creative. I want head rests on a bench.

Check out my 83 build...They are not hard to adapt to the factory 83 seat rails. And VERY worth it.

notyo_cheez · 11-01-2011, 03:51 PM

Quote:

Originally Posted by Palf70Step

Check out my 83 build...They are not hard to adapt to the factory 83 seat rails. And VERY worth it.

Thanks, I was looking at that from your link on Facebook. Looking at cannibalizing the framework under the seat cushion from the '81 and bolting on to the '93, as I can't use a MIG welder without either running it off of a portable generator or rewiring my house (long story).

lanconcj · 11-01-2011, 08:08 PM

I dumped my break in oil at 700 miles. On inspection of the oil, I found a bunch of red flakes. After panicing a little, I figured out that the flakes came from the oil filter. My strap wrench shredded the STP logo right off of it.

muthstryker · 11-01-2011, 09:18 PM

Jealous of you guys that get to work on your trucks!! Recovering from Carpal Tunnel surgery on my right hand and getting ready to do my left! I haven't/cant touch my truck for the next 3 or so months, its been 2 months so far and im going bonkers. I find my self in the garage just lookin at it!

lurch115 · 11-02-2011, 05:08 AM

i took this video of the truck. just got the 500 mile break in done on the fresh 358.

http://www.youtube.com/watch?v=uJwCUi6eeqI&feature...

can't....stop....watching...it either!

10-30-2011, 10:22 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,287	What did you get done 10/30/2011 spooktacular halloween edition have at it all ill post later! __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-30-2011, 10:32 PM	#2
st1 Registered User Join Date: Oct 2005 Location: Jacksonville, NC Posts: 224	Re: What did you get done 10/30/2011 spooktacular halloween edition I was able to get my junkyard speakers properly mounted and switched out all my zipties under the hood. Who needs luck when you have zipties and vice grips? __________________ stone sends... 78 GMC Stepside (http://67-72chevytrucks.com/vboard/s...d.php?t=243201) 06 Dodge Charger Daytona R/T 05 Suzuki GSX-R 1000

10-30-2011, 10:35 PM	#3
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: What did you get done 10/30/2011 spooktacular halloween edition Went to work this morning and fired up my Pete and its got a dead miss in a $25000 Cat motor. Got to take it to the shop tomorrow and thats got me more scared than any trick or treater right now. __________________ John 82 Chevy Silverado 350ci/TH350

10-30-2011, 10:44 PM	#4
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: What did you get done 10/30/2011 spooktacular halloween edition I found a car on ebay a couple of weeks ago, just randomly searching. I called the owner to see what it would take to buy it, and he wanted to let the auction ride. It didn't clear reserve, so I just left it at that. I was looking at the auction to see where it ended, and my wife saw it. She told me if I wanted it, offer a little more and go get it. So that's exactly what I did. Friday night, I flew to Atlanta, stayed the night, and caught a ride over to Canton, GA where the car was. About an hour later, I was driving my one owner, 73K mile 1990 Lincoln Mark VII LSC SE home. I have had quite a few of these cars, and have always wanted a black SE. It made the 800 mle drive home with no issues, and got over 22 MPG at 80 the whole way. I haven't fallen in love with the Impala that I bought to drive everyday, so I am on the fence to use this car everyday, or hang on to the Impala and save this one. Attached Images __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-31-2011, 01:18 AM	#5
Kerlijah Registered User Join Date: Feb 2011 Location: Boise, ID Posts: 293	Re: What did you get done 10/30/2011 spooktacular halloween edition I blacked out my taillights and side markers...just a thin coat of rattle can black, followed by clear. Looks pretty good, and still plenty bright. Works for me! Attached Images __________________ ~Wooden Indian~ 1979 C10 SWB, shaved bed rails, drip rails, tailgate handle. 350 w/ Comp cam, hydraulic lifters, Edelbrock Performer intake, Edelbrock 650 carb, Flowtech headers, Flowmaster 40s, turbo 350 w/stage 2 shift kit...so much fun!

10-31-2011, 09:55 AM	#6
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,640	Re: What did you get done 10/30/2011 spooktacular halloween edition Saturday was rainy and cool so I worked on my couch posture. Sunday was yard work and juggle around my fleet. Needed to get my Chevelle in the garage for some gaskets, intake and valve cover and a general cleaning. Since I had everything moved around I decided to grab a quick family photo...... I should have cut my grass before the picture was taken! LOL! Kind of like your kid getting a school picture without combing their hair. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-31-2011, 12:30 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,844	Re: What did you get done 10/30/2011 spooktacular halloween edition I just drove the 83 this weekend hauling stuff from Home Depot & Lowes. Still getting stuff to gether for the engine swap. Love your fleet Bryan!!!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-31-2011, 03:28 PM	#8
TJBrown Registered User Join Date: Jul 2011 Location: Shreveport La Posts: 73	Re: What did you get done 10/30/2011 spooktacular halloween edition Worked on a lt of stuff this weekend. Started off with a trip to the u pull it park. Made a list and went to town. Stuff i got done. 1. reconnected all wiring for the wipers (was cut for some reason) 2. New locks for the doors and ingition (all keyed the same) 3. Installed new carpet from Classic Industries 4. Installed new bench seat cover from Classic industries 5. Dyed Kick Panels black. 6. Installed new Speedo cable and found out the driven gear is actually broke. 7. Installed new bumpers on the tail gate. Worked on installing a Classic industries Dash but got a little frustrated and put it away and grabbed a beer or 3. __________________ 85 Silverado SWB

10-31-2011, 03:30 PM	#9
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: What did you get done 10/30/2011 spooktacular halloween edition i had a coffin i was going to paint black and put a bloody ford logo on and park outside my grandmas house with it propped up in the bed but i couldnt afford new tires in time __________________

10-31-2011, 03:41 PM	#10
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: What did you get done 10/30/2011 spooktacular halloween edition filled my tailgate and relocated the handle __________________ Overkill is under rated, Redneck Customs Truck Club Hudson, IA "Clifford" 83 Chevy K20 4x4, Mudder 7" lift rolling 44's "Basterd Child" 86 Chevy K30 4x4 crue cab Dule, 7.3l international WIP '00 ex-cab Silverado 4x4 DD I hate red trucks but you can't tell by looking at what I own

10-31-2011, 07:14 PM	#13
Low84 Registered User Join Date: Oct 2004 Location: Roma,TX Posts: 774	Re: What did you get done 10/30/2011 spooktacular halloween edition Had a friend that wanted me to take place in his wedding caravan, and I spent Saturday from 7am -1pm buffing and polishing and then about another two or so hours cleaning it to have it ready by 4:30 Still need to clean out the small creases but car didn't look to bad I think:

10-31-2011, 10:16 PM	#14
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: What did you get done 10/30/2011 spooktacular halloween edition got it running after finding a broken dizzy cap new plugs ,wires,cap still running with no inner fenders....makes for an ez tune up lol picked up new 14 fender bolts and nuts....$23.00 __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

10-31-2011, 10:40 PM	#15
Redcap Registered User Join Date: May 2010 Location: Lewis County, WA Posts: 1,523	Re: What did you get done 10/30/2011 spooktacular halloween edition Had the absolute pleasure of some guy wrecking my truck today. It isn't real bad, but the driver's frame horn is tweaked and it only turns one direction.

11-01-2011, 10:22 AM	#17
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: What did you get done 10/30/2011 spooktacular halloween edition Got the new Alternator and Pulleys put on. Also got another carb and Fuel Regulator. no pics as it looks exactly as it did before.

11-01-2011, 10:51 AM	#18
Motodrew Registered User Join Date: Oct 2011 Location: Denver, CO Posts: 38	Re: What did you get done 10/30/2011 spooktacular halloween edition Got my Challenger steering wheel mounted up! Attached Images __________________ '85 Silverado, 4x4, SB 350. Keep them beavers grinnin' and them wheels a spinnin'!



Register or Log In To remove these advertisements.

11-01-2011, 02:56 PM	#19
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: What did you get done 10/30/2011 spooktacular halloween edition Got the cab, hood, fenders, and a bunch of odds and ends ready for a trip to the media blaster. By claypool782 at 2011-10-31 Posted via Mobile Device

11-01-2011, 03:29 PM	#20
notyo_cheez Registered User Join Date: Apr 2011 Location: corpus christi, tx - america's fattest city Posts: 253	Re: What did you get done 10/30/2011 spooktacular halloween edition Pulled the '81 seat out, looked at the donor from a '93 and was rudely awakened. Time to get creative. I want head rests on a bench.

11-01-2011, 08:08 PM	#23
lanconcj Registered User Join Date: May 2011 Location: Anahuac Tx Posts: 111	Re: What did you get done 10/30/2011 spooktacular halloween edition I dumped my break in oil at 700 miles. On inspection of the oil, I found a bunch of red flakes. After panicing a little, I figured out that the flakes came from the oil filter. My strap wrench shredded the STP logo right off of it.

11-01-2011, 09:18 PM	#24
muthstryker Registered User Join Date: Dec 2009 Location: Snohomish, Washington Posts: 1,187	Re: What did you get done 10/30/2011 spooktacular halloween edition Jealous of you guys that get to work on your trucks!! Recovering from Carpal Tunnel surgery on my right hand and getting ready to do my left! I haven't/cant touch my truck for the next 3 or so months, its been 2 months so far and im going bonkers. I find my self in the garage just lookin at it!

Register or Log In To remove these advertisements.