well once again spun another rod bearing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loudnlifted88 · 10-31-2011, 08:27 PM

took my plow truck out today to pull a buddy of mine out who decided to go mudding and barrie his dodge to the rockers well while trying to get out to pull him out my truck started to knock and then die i knew the motor was on the way out the door just a matter of time... on a good note already got a motor to put in it and i also needed to put a tranny in it so i guess ill do it all at once

Also picked up some gmt800 tow mirrors for my truck off ebay

scotts62 · 11-01-2011, 12:43 AM

Ya they do that when you hold them to the floor without reving it up and down as the tires are spinning so that the oil pump can slow down enough to get oil to the important parts, you proved that in the burnout contest

loudnlifted88 · 11-01-2011, 08:35 AM

i was always told you play you pay so i guess im paying

scotts62 · 11-01-2011, 09:31 AM

thats true

Restrorob · 11-01-2011, 12:29 PM

Dang Duuude !

A lighter foot yields deeper pockets.....

loudnlifted88 · 11-01-2011, 12:30 PM

Quote:

Originally Posted by Restrorob

Dang Duuude !

A lighter foot yields deeper pockets.....

never heard that one before but it is very true

Hoods69BadBowTie · 11-01-2011, 02:04 PM

Looks like fun but sounds spendy. Your buddy in the dodge needs more lift and bigger tires haha

loudnlifted88 · 11-01-2011, 02:30 PM

Quote:

Originally Posted by Hoods69BadBowTie

Looks like fun but sounds spendy. Your buddy in the dodge needs more lift and bigger tires haha

well my other buddy we called to come pull me and him back out has a dodge with a 6 inch lift 35'' pit bull rockers and a 360 had no real problem pulling him out my truck barely went out under its own power but it did

loudnlifted88 · 11-01-2011, 02:40 PM

with the recent snow we had the ground was soft and really muddy heres a pic of where we were

10-31-2011, 08:27 PM	#1
loudnlifted88 Registered User Join Date: Jan 2010 Location: Wales,Maine Posts: 776	well once again spun another rod bearing took my plow truck out today to pull a buddy of mine out who decided to go mudding and barrie his dodge to the rockers well while trying to get out to pull him out my truck started to knock and then die i knew the motor was on the way out the door just a matter of time... on a good note already got a motor to put in it and i also needed to put a tranny in it so i guess ill do it all at once Also picked up some gmt800 tow mirrors for my truck off ebay Attached Images __________________ IM ONLY 18 AND LOVIN IT IF MUD AINT FLYIN YOU AINT TRYIN! 1badgmc- Just think. Someone worked hard to make it look that bad. 1988 chevy stepside 305 five speed Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=383945 1994 GMC ext. cab short box 350 auto Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=438873 1996 GMC 2500 ECSB 454 4l80e: build thread http://www.gmt400.com/forum/showthre...gmc-2500-build 1998 GMC K-1500 ECSB 305 auto partd truck 1999 GMC K2500 suburban 350 4x4 Dads project 1981 Corvette 350 auto Also Dads project 1989 Corvette 350 auto ^^ 1998 GMC K1500 ecsb 305 auto Brothers project

11-01-2011, 12:43 AM	#2
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: well once again spun another rod bearing Ya they do that when you hold them to the floor without reving it up and down as the tires are spinning so that the oil pump can slow down enough to get oil to the important parts, you proved that in the burnout contest __________________ Scott 93 crew cab build Project 62

11-01-2011, 08:35 AM	#3
loudnlifted88 Registered User Join Date: Jan 2010 Location: Wales,Maine Posts: 776	Re: well once again spun another rod bearing i was always told you play you pay so i guess im paying __________________ IM ONLY 18 AND LOVIN IT IF MUD AINT FLYIN YOU AINT TRYIN! 1badgmc- Just think. Someone worked hard to make it look that bad. 1988 chevy stepside 305 five speed Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=383945 1994 GMC ext. cab short box 350 auto Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=438873 1996 GMC 2500 ECSB 454 4l80e: build thread http://www.gmt400.com/forum/showthre...gmc-2500-build 1998 GMC K-1500 ECSB 305 auto partd truck 1999 GMC K2500 suburban 350 4x4 Dads project 1981 Corvette 350 auto Also Dads project 1989 Corvette 350 auto ^^ 1998 GMC K1500 ecsb 305 auto Brothers project

11-01-2011, 09:31 AM	#4
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: well once again spun another rod bearing thats true __________________ Scott 93 crew cab build Project 62

11-01-2011, 12:29 PM	#5
Restrorob The One And Only !!! Join Date: Jan 2007 Location: Hole in the woods Florida Posts: 4,567	Re: well once again spun another rod bearing Dang Duuude ! A lighter foot yields deeper pockets..... __________________ 93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. *"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!*

11-01-2011, 02:04 PM	#7
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: well once again spun another rod bearing Looks like fun but sounds spendy. Your buddy in the dodge needs more lift and bigger tires haha __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

11-01-2011, 02:40 PM	#9
loudnlifted88 Registered User Join Date: Jan 2010 Location: Wales,Maine Posts: 776	Re: well once again spun another rod bearing with the recent snow we had the ground was soft and really muddy heres a pic of where we were __________________ IM ONLY 18 AND LOVIN IT IF MUD AINT FLYIN YOU AINT TRYIN! 1badgmc- Just think. Someone worked hard to make it look that bad. 1988 chevy stepside 305 five speed Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=383945 1994 GMC ext. cab short box 350 auto Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=438873 1996 GMC 2500 ECSB 454 4l80e: build thread http://www.gmt400.com/forum/showthre...gmc-2500-build 1998 GMC K-1500 ECSB 305 auto partd truck 1999 GMC K2500 suburban 350 4x4 Dads project 1981 Corvette 350 auto Also Dads project 1989 Corvette 350 auto ^^ 1998 GMC K1500 ecsb 305 auto Brothers project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.