NJ 85 gmc sierra classic part out. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jasonroman · 11-07-2011, 04:52 PM

location sayreville nj.
1985 gmc sierra classic.
trans went bad, so i purchased and 86 short bed.

i pulled the 350 out of the truck. everything else is available.
id like to see parts go to truck lovers, rather then junk yard. but i cant keep the truck here forever.

passenger side of bed had dent.
tailgate had a little dent.

rust free frame.

southern truck.

brand new windsield.

good glass all around.

i have a set of ralleys with new tires.

new exhaust cat back.

new brakes all around.

clean cab

clean truck, just bad trans and couple dings,

if interested in any parts let me know

thanks
jason

wheels on gray truck are for sale,
blue truck is parts truck

dabels23 · 11-07-2011, 05:10 PM

How is the dash pad and vent windows?

**ScottH** · 11-07-2011, 06:34 PM

Jason, might be interested in the windshield, front bumper, taillights, and I'll get in line for the dash pad as well. Also what kind of shape is the seat in, can u post some interior pics? Also interested in wiper motor depending on condition and price.

Thanks
Scott

turner16 · 11-07-2011, 08:30 PM

Looking for the Dash Bezel the piece about the glove box and the dash defrost vents.
Does it have AC?

**old Rusty C10** · 11-07-2011, 09:47 PM

I could use the bumperettes on the front and an 8 inch rallye wheel
If the rear bumper is good, clean and straight ill be interested in that too
I could use the latch from the sliding rear window and prolly some other stuff lol no shipping

trout · 11-07-2011, 10:17 PM

wish you were closer to get the hole thing i love this truck... whats on it for lowering componets???

trout · 11-07-2011, 10:22 PM

and is that a gmc hood ornimate??

jasonroman · 11-07-2011, 10:25 PM

Well guys the dash pad is staying with me. One that came with gray truck was bad so I'm keeping the other one. Besides that and motor think everything else is up for grabs.
Suspension was 5/7 kit. But all that's going on short bed.
Jersey guys, let me know if you'd like to come by and see parts.
I'll take more pics tomorrow afternoon.
Think rear spider clip is missing bob, ill check tomorrow.
Posted via Mobile Device

Patsfan34 · 11-07-2011, 11:26 PM

I'm interested in the Grill, bezels and maybe the chrome that goes around the grill and bezels. I will be in Long Island on Sunday the 20th. How much? and could you hold it for me until then?

jasonroman · 11-07-2011, 11:43 PM

Quote:

Originally Posted by Patsfan34

I'm interested in the Grill, bezels and maybe the chrome that goes around the grill and bezels. I will be in Long Island on Sunday the 20th. How much? and could you hold it for me until then?

How's 60 bucks sound. Working 2 jobs and a wedding Friday,work saturday. I'll try to take parts off truck Sunday morning. If interested Lmk. Thanks.
Posted via Mobile Device

jasonroman · 11-07-2011, 11:45 PM

Quote:

Originally Posted by trout

and is that a gmc hood ornimate??

Yes sir
Posted via Mobile Device

jasonroman · 11-07-2011, 11:50 PM

Quote:

Originally Posted by ScottH

Jason, might be interested in the windshield, front bumper, taillights, and I'll get in line for the dash pad as well. Also what kind of shape is the seat in, can u post some interior pics? Also interested in wiper motor depending on condition and price.

Thanks
Scott

Scott,
Paid 250 for windshield about 5 mnths back. 125
75 for number
50 for tail lights
15 for wiped motor.
Let me know if your Interested. Not sure if prices are good. Lmk.
Jason
Posted via Mobile Device

trout · 11-07-2011, 11:56 PM

Quote:

Originally Posted by jasonroman

Yes sir
Posted via Mobile Device

can you get pics and how much shipped to 29073??

Patsfan34 · 11-08-2011, 12:00 AM

Quote:

Originally Posted by jasonroman

How's 60 bucks sound. Working 2 jobs and a wedding Friday,work saturday. I'll try to take parts off truck Sunday morning. If interested Lmk. Thanks.
Posted via Mobile Device

Would you take $50? And I wouldn't be down the way until 2 Sundays from now so you got plenty of time to get the parts off. I'm interested in the tail lights as well so if you don't put the deal together with him I'd like to be second in line. Thanks man!

jasonroman · 11-08-2011, 12:03 AM

Pic will be taken tomorrow. Hopefully
Posted via Mobile Device

**ScottH** · 11-08-2011, 12:14 AM

Jason, thanks for getting back to me.
PM sent

Scott

dabels23 · 11-08-2011, 09:07 AM

How about the vent windows, pull straps with the caps, and gear indicator

jasonroman · 11-08-2011, 10:36 AM

Quote:

Originally Posted by dabels23

How about the vent windows, pull straps with the caps, and gear indicator

Vent Windows are good.
Not sure what pull straps,caps are. Think gear indicator would sell with cluster.
Posted via Mobile Device

turner16 · 11-08-2011, 05:47 PM

Quote:

Originally Posted by turner16

Looking for the Dash Bezel the piece about the glove box and the dash defrost vents.
Does it have AC?

What about these off the old one your replacing?

jasonroman · 11-08-2011, 07:49 PM

Quote:

Originally Posted by turner16

What about these off the old one your replacing?

You want the price that goes around cluster?
Also the metal band that goes on dash pad?
And the vents that go into dash pad ?
Truck does have a.c.

Sorry guys didn't have time to take pics. Long day. 4 hours sleep between jobs.
Thursday or Friday ill take pics.
Posted via Mobile Device

jasonroman · 11-11-2011, 08:54 AM

couple pics

**ScottH** · 11-11-2011, 10:15 AM

Jason, I'll take the radiator overflow tank along with the windshield and wiper motor.

Also would u sell just the shifter arm from the column? I can swap u my old one, its just has some rust on it.

BTW LMK if u want the rollers we talked about, maybe a swap for the parts I mentioned above?

Thanks
Scott

jasonroman · 11-11-2011, 10:38 AM

Scott I apteciate the offer on rollers but if the guy can drag it out without me putting old spindles and good rotors back on, is be better off sending truck as is. And then i could use the cash for parts for gray truck.....that would be nice but reality is ill be giving moneys to wife to fund Xmas to two kids. Lmk when you wanna head my way.
Posted via Mobile Device

**ScottH** · 11-11-2011, 11:41 AM

No problem Jason.....I can come up whenever is good 4 u, no hurry on my end.
LMK when and on shifter arm if u want me to bring mine up.

Thanks
Scott

trout · 11-11-2011, 12:54 PM

how much shipped for the hood orniment 29073??

11-07-2011, 04:52 PM	#1
jasonroman Registered User Join Date: Jul 2008 Location: sayreville nj Posts: 1,072	85 gmc sierra classic part out. location sayreville nj. 1985 gmc sierra classic. trans went bad, so i purchased and 86 short bed. i pulled the 350 out of the truck. everything else is available. id like to see parts go to truck lovers, rather then junk yard. but i cant keep the truck here forever. passenger side of bed had dent. tailgate had a little dent. rust free frame. southern truck. brand new windsield. good glass all around. i have a set of ralleys with new tires. new exhaust cat back. new brakes all around. clean cab clean truck, just bad trans and couple dings, if interested in any parts let me know thanks jason wheels on gray truck are for sale, blue truck is parts truck

11-07-2011, 05:10 PM	#2
dabels23 Registered User Join Date: Sep 2009 Location: Eudora, KS Posts: 131	Re: 85 gmc sierra classic part out. How is the dash pad and vent windows?

11-07-2011, 06:34 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 85 gmc sierra classic part out. Jason, might be interested in the windshield, front bumper, taillights, and I'll get in line for the dash pad as well. Also what kind of shape is the seat in, can u post some interior pics? Also interested in wiper motor depending on condition and price. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 11-07-2011 at 06:46 PM.

11-07-2011, 08:30 PM	#4
turner16 Registered User Join Date: Sep 2010 Location: Ajax, Ontario Posts: 214	Re: 85 gmc sierra classic part out. Looking for the Dash Bezel the piece about the glove box and the dash defrost vents. Does it have AC?

11-07-2011, 09:47 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: 85 gmc sierra classic part out. I could use the bumperettes on the front and an 8 inch rallye wheel If the rear bumper is good, clean and straight ill be interested in that too I could use the latch from the sliding rear window and prolly some other stuff lol no shipping __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-07-2011, 10:17 PM	#6
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: 85 gmc sierra classic part out. wish you were closer to get the hole thing i love this truck... whats on it for lowering componets??? __________________ Edited by staff

11-07-2011, 10:22 PM	#7
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: 85 gmc sierra classic part out. and is that a gmc hood ornimate?? __________________ Edited by staff

11-07-2011, 10:25 PM	#8
jasonroman Registered User Join Date: Jul 2008 Location: sayreville nj Posts: 1,072	Re: 85 gmc sierra classic part out. Well guys the dash pad is staying with me. One that came with gray truck was bad so I'm keeping the other one. Besides that and motor think everything else is up for grabs. Suspension was 5/7 kit. But all that's going on short bed. Jersey guys, let me know if you'd like to come by and see parts. I'll take more pics tomorrow afternoon. Think rear spider clip is missing bob, ill check tomorrow. Posted via Mobile Device

11-07-2011, 11:26 PM	#9
Patsfan34 Registered User Join Date: Dec 2008 Location: New England Posts: 661	Re: 85 gmc sierra classic part out. I'm interested in the Grill, bezels and maybe the chrome that goes around the grill and bezels. I will be in Long Island on Sunday the 20th. How much? and could you hold it for me until then?

11-08-2011, 12:03 AM	#15
jasonroman Registered User Join Date: Jul 2008 Location: sayreville nj Posts: 1,072	Re: 85 gmc sierra classic part out. Pic will be taken tomorrow. Hopefully Posted via Mobile Device

11-08-2011, 12:14 AM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 85 gmc sierra classic part out. Jason, thanks for getting back to me. PM sent Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-08-2011, 09:07 AM	#17
dabels23 Registered User Join Date: Sep 2009 Location: Eudora, KS Posts: 131	Re: 85 gmc sierra classic part out. How about the vent windows, pull straps with the caps, and gear indicator

11-11-2011, 08:54 AM	#21
jasonroman Registered User Join Date: Jul 2008 Location: sayreville nj Posts: 1,072	Re: 85 gmc sierra classic part out. couple pics

11-11-2011, 10:15 AM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 85 gmc sierra classic part out. Jason, I'll take the radiator overflow tank along with the windshield and wiper motor. Also would u sell just the shifter arm from the column? I can swap u my old one, its just has some rust on it. BTW LMK if u want the rollers we talked about, maybe a swap for the parts I mentioned above? Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-11-2011, 10:38 AM	#23
jasonroman Registered User Join Date: Jul 2008 Location: sayreville nj Posts: 1,072	Re: 85 gmc sierra classic part out. Scott I apteciate the offer on rollers but if the guy can drag it out without me putting old spindles and good rotors back on, is be better off sending truck as is. And then i could use the cash for parts for gray truck.....that would be nice but reality is ill be giving moneys to wife to fund Xmas to two kids. Lmk when you wanna head my way. Posted via Mobile Device



Register or Log In To remove these advertisements.

11-11-2011, 11:41 AM	#24
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 85 gmc sierra classic part out. No problem Jason.....I can come up whenever is good 4 u, no hurry on my end. LMK when and on shifter arm if u want me to bring mine up. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-11-2011, 12:54 PM	#25
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: 85 gmc sierra classic part out. how much shipped for the hood orniment 29073?? __________________ Edited by staff

Register or Log In To remove these advertisements.