OH Nos bedside molding ( short bed ) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fwells67 · 11-07-2011, 11:17 PM

this is for in front of the fenders on both sides have 2 sets of woodgrain which would be i piece for each side x2 . $75 a set no wrapping but i do believe these to be gm because i got these in a bunch of gm nos parts yesterday from nj that i will be listing in the next couple days . i also have 2 black and you can see by the screw holes they have never been bolted on. black set is $50

**too much stuff** · 11-07-2011, 11:20 PM

Interested in the lower 2 woodgrains if you can verify pass side in front of rear wheel.
Also, any damage or problems? How long do they measure? Thanks.
I should say i will take those 2 if you can answer those questions and price.

mcbassin · 11-07-2011, 11:28 PM

next in line on the woodgrains pending part numbers

Hollywood Knight · 11-07-2011, 11:29 PM

i'll take the black set.

HOTFUN · 11-07-2011, 11:37 PM

I'll take the second from the top LH woodgrain and the RH woodgrain below it if you are selling them as a set of woodgrain mouldings.

mcbassin · 11-07-2011, 11:49 PM

I guess I should have said I will take a set if you are selling them as a set....

fwells67 · 11-07-2011, 11:56 PM

Quote:

Originally Posted by too much stuff

Interested in the lower 2 woodgrains if you can verify pass side in front of rear wheel.
Also, any damage or problems? How long do they measure? Thanks.
I should say i will take those 2 if you can answer those questions and price.

they measure 21 3/4 at the top from edge to edge $75 to your door they nedd cleaned up but the woodgrain is mint and the alum should polish close to mint

fwells67 · 11-07-2011, 11:58 PM

sorry for the delay i am sorting all of it now. there is 3 for in front of the wheelwell and 1 for behind the wheel

fwells67 · 11-07-2011, 11:59 PM

Quote:

Originally Posted by mcbassin

next in line on the woodgrains pending part numbers

there is no part numbers on the molding that i can find but if you know where they are let me know and i will find them for you

fwells67 · 11-08-2011, 12:00 AM

Quote:

Originally Posted by Hollywood Knight

i'll take the black set.

they are yours if you want them $50 to your door

**too much stuff** · 11-08-2011, 12:01 AM

Quote:

Originally Posted by fwells67

they measure 21 3/4 at the top from edge to edge $75 to your door they nedd cleaned up but the woodgrain is mint and the alum should polish close to mint

Let me do a check, but i think they may be blazer.

fwells67 · 11-08-2011, 12:02 AM

Quote:

Originally Posted by HOTFUN

I'll take the second from the top LH woodgrain and the RH woodgrain below it if you are selling them as a set of woodgrain mouldings.

i have 1 set right and left and 1 set for the front and rear bedside

**70shortfleet** · 11-08-2011, 12:27 AM

If those front pieces are measuring 21 3/4" they are probably for a Blazer. The sb truck should measure 27 1/4"

**too much stuff** · 11-08-2011, 12:37 AM

Quote:

Originally Posted by 70shortfleet

If those front pieces are measuring 21 3/4" they are probably for a Blazer. The sb truck should measure 27 1/4"

I think you are correct. I wish i needed them for a blazer, but what i need is the pass side in front of rear wheel in woodgrain for a shortbed.
I will pass to the next in line.

Hollywood Knight · 11-08-2011, 12:50 AM

Are the black ones for a blazer or a short bed ?

HOTFUN · 11-08-2011, 12:53 AM

Blazer woodgrain set is also GREAT for me. Paypal sent for the LH and RH woodgrain set without holes and ahead of the rear tires. Thanks.

**too much stuff** · 11-08-2011, 12:54 AM

Quote:

Originally Posted by Hollywood Knight

Are the black ones for a blazer or a short bed ?

Blazer and shortbed are the same behind the rear tires.

Hollywood Knight · 11-08-2011, 01:03 AM

Pm sent

mcbassin · 11-08-2011, 01:03 AM

Quote:

Originally Posted by HOTFUN

Blazer woodgrain set is also GREAT for me. Paypal sent for the LH and RH woodgrain set without holes and ahead of the rear tires. Thanks.

Did I get skipped over?

fwells67 · 11-08-2011, 01:18 AM

no you are up just real busy right now sorting all this stuff

mcbassin · 11-08-2011, 01:24 AM

Quote:

Originally Posted by fwells67

no you are up just real busy right now sorting all this stuff

What do you have left? just the ones with the holes in them? My mistake, I thought you were selling all 4 pieces. Then went back and re-read it. Let me know what you still have for sell. I am interested in all SWB woodgrain trim. thanks,

fwells67 · 11-08-2011, 02:02 AM

i have 1 woodgrain with holes and 1 without

teeitup · 11-08-2011, 08:59 AM

If you have any blazer woodgrain left I'd be interested

mcbassin · 11-08-2011, 09:26 AM

Never mind it looks like the guy behind me got the other pair I was interested in. I guess he had the magic words? I did say "next in line on the woodgrains" I guess that isn't the same as "I'll take it" Sounds like you guys worked out a deal on PMs.

**screaminchevypickup** · 11-08-2011, 10:22 AM

You sure do get skipped over a lot, it seems like mike!!
Posted via Mobile Device

11-07-2011, 11:17 PM	#1
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Nos bedside molding ( short bed ) this is for in front of the fenders on both sides have 2 sets of woodgrain which would be i piece for each side x2 . $75 a set no wrapping but i do believe these to be gm because i got these in a bunch of gm nos parts yesterday from nj that i will be listing in the next couple days . i also have 2 black and you can see by the screw holes they have never been bolted on. black set is $50 Attached Images

11-07-2011, 11:20 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,769	Re: Nos bedside molding ( short bed ) Interested in the lower 2 woodgrains if you can verify pass side in front of rear wheel. Also, any damage or problems? How long do they measure? Thanks. I should say i will take those 2 if you can answer those questions and price. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto Last edited by too much stuff; 11-07-2011 at 11:26 PM.

11-07-2011, 11:28 PM	#3
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Nos bedside molding ( short bed ) next in line on the woodgrains pending part numbers __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-07-2011, 11:29 PM	#4
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Nos bedside molding ( short bed ) i'll take the black set.

11-07-2011, 11:37 PM	#5
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Nos bedside molding ( short bed ) I'll take the second from the top LH woodgrain and the RH woodgrain below it if you are selling them as a set of woodgrain mouldings. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

11-07-2011, 11:49 PM	#6
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Nos bedside molding ( short bed ) I guess I should have said I will take a set if you are selling them as a set.... __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-07-2011, 11:58 PM	#8
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: Nos bedside molding ( short bed ) sorry for the delay i am sorting all of it now. there is 3 for in front of the wheelwell and 1 for behind the wheel

11-08-2011, 12:27 AM	#13
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,228	Re: Nos bedside molding ( short bed ) If those front pieces are measuring 21 3/4" they are probably for a Blazer. The sb truck should measure 27 1/4"

11-08-2011, 12:50 AM	#15
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Nos bedside molding ( short bed ) Are the black ones for a blazer or a short bed ?

11-08-2011, 12:53 AM	#16
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	Re: Nos bedside molding ( short bed ) Blazer woodgrain set is also GREAT for me. Paypal sent for the LH and RH woodgrain set without holes and ahead of the rear tires. Thanks. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

11-08-2011, 01:03 AM	#18
Hollywood Knight Junior Member Join Date: Mar 2007 Location: mesa az. Posts: 326	Re: Nos bedside molding ( short bed ) Pm sent

11-08-2011, 01:18 AM	#20
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: Nos bedside molding ( short bed ) no you are up just real busy right now sorting all this stuff

11-08-2011, 02:02 AM	#22
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: Nos bedside molding ( short bed ) i have 1 woodgrain with holes and 1 without

11-08-2011, 08:59 AM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Nos bedside molding ( short bed ) If you have any blazer woodgrain left I'd be interested __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-08-2011, 09:26 AM	#24
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Nos bedside molding ( short bed ) Never mind it looks like the guy behind me got the other pair I was interested in. I guess he had the magic words? I did say "next in line on the woodgrains" I guess that isn't the same as "I'll take it" Sounds like you guys worked out a deal on PMs. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

11-08-2011, 10:22 AM	#25
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: Nos bedside molding ( short bed ) You sure do get skipped over a lot, it seems like mike!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

Register or Log In To remove these advertisements.