|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-18-2011, 01:59 PM
|
#1 |
|
Registered User
Join Date: Nov 2011
Location: Kenya
Posts: 11
|
Intake bolts for 250 L6
Hi Folks,
Any idea where I can buy intake/exhaust bolts + bridges for a 250 chevy six???? It doesn't seem so easy to find. My ride is in Nairobi Kenya so no I can't drop by the nearest NAPA parts store... |
|
|
|
11-18-2011, 06:25 PM
|
#2 |
|
Registered User
Join Date: Sep 2011
Location: San Jose, California
Posts: 784
|
Re: Intake bolts for 250 L6
I guess you could check with the Somalia pirates and see if they've hijacked any 250 Mercruisers lately?
|
|
|
|
|
11-18-2011, 09:25 PM
|
#3 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Intake bolts for 250 L6
Welcome !!! The best Idea I could give you would be a wrecking Yard.I seriously doubt they have any with 250's in Kenya.You might try one of the Classic car wrecking yards,they'll probably cost an arm and a leg but they should be able to get them and ship to you.I don't have an extra set but coulkd probably find some over time.The main thing is the "bridges" since you can get new studs/bolts fairly easily.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
11-19-2011, 03:05 PM
|
#4 |
|
Registered User
Join Date: Nov 2011
Location: Kenya
Posts: 11
|
Re: Intake bolts for 250 L6
Yeah,
Thks The after market supports the SBC 350 but when you need stuff for a 194-230-250 things can get nasty Even finding a "decent" cherry picker ain't no pick-nick out here hee hee... But we pulled it out ok (brought the engine stand from BC...in my luggage!!) Next stop: machine shop down town Nairobi...Oh boy! |
|
|
|
|
11-20-2011, 12:26 AM
|
#5 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: Intake bolts for 250 L6
The machine shop may need a mathmetician to do the machine work.The US uses a different measuring system than anyone else.They tried to get us to go to Metric but it started about 40 years ago and is still slowly coming into use here.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
