NC WTB......no laughing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

qksilver · 11-23-2011, 10:54 PM

I am close to getting everything I need to put my 78 blazer back the way it was delivered.

I am not looking for perfect, just serviceable.

First up; complete factory dual exhaust brackets

second; factory delco am/fm radio , needs to be complete and decent looking. if it works great but doesn't matter with as much of the pig tail as possible

Third; factory bent tube p/s cooler that mounts in front of the core support, complete with brackets hoses connectors what ever, condition of hoses doesn't matter but they need to be there so I can match them

Fourth: heat shields and plug wire holders with hardware.

All parts need to be the same as what would come on a 78, date code......don't care, adds to the cost.

I am in no hurry and price will make a difference. I want to buy complete because I am tired of trying to piece together a complete set up. It's going to be a driver, was ordered with quite a few options and when the economy gets better, when i get my overtime back, I will go thru it. That doesn't look like it going to be anytime soon!

Thanks,
Steve

**michael bustamante** · 11-24-2011, 12:38 AM

If you come across a.factory radio i have the 4 knobs. Let me know if you need em
Posted via Mobile Device

**old Rusty C10** · 11-24-2011, 09:25 AM

im going to take some pics of the radios i have in the basement.. i dont recall if they work or not or what exactly they came out from, but if they can work for you its one less thing in my basement

qksilver · 11-24-2011, 10:46 AM

sounds good.............lol.

Thanks,
Steve

**crossy** · 11-24-2011, 10:25 PM

I have to look but i THINK i saved a nice set of the plug shileds.

qksilver · 11-24-2011, 10:58 PM

It's all the little stuff that has been causing my problems. The tilt column, the rally wheels, radiator, all the a/c stuff etc, no problems. I have three parts truck I bought cheap but they are missing this stuff, I think the stock radio was the first things to go, then they put aftermarket dual exhaust so that was second, especially here in NC, got to be loud and straight out the back........so there went the brackets and heat shields!.

thanks guys, no hurry, long term parts searching

thx,
Steve

qksilver · 12-02-2011, 09:41 AM

ttt

**crossy** · 12-02-2011, 04:18 PM

I guess 3 outta 4 ain't bad. lol . if you pass i understand. I'm suprised i found them. I'm sure someone here would have one of the missing ones you need since most dead 305's have ONE good one left. . $15 plus $7 shipping. Crossy

Make sure you have the wire shield above the starter as that is often mistakingly eliminated when headers are installed. I do have a starter wire Shield.

**tkeduk8r** · 12-02-2011, 07:16 PM

Ive got a couple radios in good working order if these work for you....

**tkeduk8r** · 12-02-2011, 07:22 PM

oops no pics... here they are... and I have the knobs that come with the last one.... lemme know if any of these work for you....
--Mike

qksilver · 12-02-2011, 09:34 PM

The bottom one is the one my truck came with, but, have to ask the cassette one, factory 78?

Budget wise, what are you asking for the am/fm, and the cassette if it is factory 78. I am not up on the 73-up stuff, now ask me about 73-down!

wiring pig tail?

Thanks,
Steve

**tkeduk8r** · 12-02-2011, 11:50 PM

Hows 45 for the cassette or 25 for the am/fm sound???? They fit nice in a USPS large priority box, so would be whatever that shipping cost would be (not sure if it went up lately) in addition... if that sounds fair PM me with shipping info and we can work out the payment stuff....
--Mike

**tkeduk8r** · 12-02-2011, 11:50 PM

oh and i will include the piggies too....

coater · 12-03-2011, 12:43 AM

Quote:

Originally Posted by crossy

I guess 3 outta 4 ain't bad. lol . if you pass i understand. I'm suprised i found them. I'm sure someone here would have one of the missing ones you need since most dead 305's have ONE good one left. . $15 plus $7 shipping. Crossy

Make sure you have the wire shield above the starter as that is often mistakingly eliminated when headers are installed. I do have a starter wire Shield.

If you decide to buy these, and would like them powdercoated, send them to me, and I will do them for you at no charge. That's if your interested.

Coater

qksilver · 12-03-2011, 08:46 PM

that's like asking if I love to eat! lol

Yes...........I will pm you, I am a little short this month, so the radio first, then the shields.

Thanks,
Steve

11-23-2011, 10:54 PM	#1
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	WTB......no laughing I am close to getting everything I need to put my 78 blazer back the way it was delivered. I am not looking for perfect, just serviceable. First up; complete factory dual exhaust brackets second; factory delco am/fm radio , needs to be complete and decent looking. if it works great but doesn't matter with as much of the pig tail as possible Third; factory bent tube p/s cooler that mounts in front of the core support, complete with brackets hoses connectors what ever, condition of hoses doesn't matter but they need to be there so I can match them Fourth: heat shields and plug wire holders with hardware. All parts need to be the same as what would come on a 78, date code......don't care, adds to the cost. I am in no hurry and price will make a difference. I want to buy complete because I am tired of trying to piece together a complete set up. It's going to be a driver, was ordered with quite a few options and when the economy gets better, when i get my overtime back, I will go thru it. That doesn't look like it going to be anytime soon! Thanks, Steve

11-24-2011, 12:38 AM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: WTB......no laughing If you come across a.factory radio i have the 4 knobs. Let me know if you need em Posted via Mobile Device __________________ 1967custom

11-24-2011, 09:25 AM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	Re: WTB......no laughing im going to take some pics of the radios i have in the basement.. i dont recall if they work or not or what exactly they came out from, but if they can work for you its one less thing in my basement __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-24-2011, 10:46 AM	#4
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: WTB......no laughing sounds good.............lol. Thanks, Steve

11-24-2011, 10:25 PM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WTB......no laughing I have to look but i THINK i saved a nice set of the plug shileds. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

11-24-2011, 10:58 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: WTB......no laughing It's all the little stuff that has been causing my problems. The tilt column, the rally wheels, radiator, all the a/c stuff etc, no problems. I have three parts truck I bought cheap but they are missing this stuff, I think the stock radio was the first things to go, then they put aftermarket dual exhaust so that was second, especially here in NC, got to be loud and straight out the back........so there went the brackets and heat shields!. thanks guys, no hurry, long term parts searching thx, Steve

12-02-2011, 09:41 AM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: WTB......no laughing ttt

12-02-2011, 04:18 PM	#8
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: WTB......no laughing I guess 3 outta 4 ain't bad. lol . if you pass i understand. I'm suprised i found them. I'm sure someone here would have one of the missing ones you need since most dead 305's have ONE good one left. . $15 plus $7 shipping. Crossy Make sure you have the wire shield above the starter as that is often mistakingly eliminated when headers are installed. I do have a starter wire Shield. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-02-2011, 07:16 PM	#9
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: WTB......no laughing Ive got a couple radios in good working order if these work for you.... __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

12-02-2011, 07:22 PM	#10
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: WTB......no laughing oops no pics... here they are... and I have the knobs that come with the last one.... lemme know if any of these work for you.... --Mike Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

12-02-2011, 09:34 PM	#11
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: WTB......no laughing The bottom one is the one my truck came with, but, have to ask the cassette one, factory 78? Budget wise, what are you asking for the am/fm, and the cassette if it is factory 78. I am not up on the 73-up stuff, now ask me about 73-down! wiring pig tail? Thanks, Steve

12-02-2011, 11:50 PM	#12
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: WTB......no laughing Hows 45 for the cassette or 25 for the am/fm sound???? They fit nice in a USPS large priority box, so would be whatever that shipping cost would be (not sure if it went up lately) in addition... if that sounds fair PM me with shipping info and we can work out the payment stuff.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

12-02-2011, 11:50 PM	#13
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: WTB......no laughing oh and i will include the piggies too.... __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

12-03-2011, 08:46 PM	#15
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: WTB......no laughing that's like asking if I love to eat! lol Yes...........I will pm you, I am a little short this month, so the radio first, then the shields. Thanks, Steve



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.