NC Last Call

[1980c-10 mybaby]

These are the last time i will list these items if not sold they are going to the crusher come the weekend of dec3/4... willing to work prices drastically shipping is not included but i can get quotes for everything...


Cab NO DOORS 160
Bed 120
Drop shocks (front only) 30 Toxic Brand SOLD
Hood 25
Inner Fender Wells 60 both
Fenders 60 both
Grille 30
Core Support 20
Headlights 40
HID wiring 40
Windshield (taken out of cab for a friend but he doesnt need it anymore)
Rear-End 10 bolt New brake hardware in drums 30
New rotors and calipers front 50o
OEM dashpad Make offer i will ship if need be 150
Brand New grey carpet 100


Prices are OBO

[Blake_H]

What kind of shape is the dash pad in? Do you have any photos of it?

[qksilver]

what thickness are the rotors? what shape are the inner fenders and the windshield?
What ratio is the rear?

I could come and get them Friday on my day off. Not sure what width the rotors are on a 78 2 wheel drive blazer.
Depending on the rear, looking for 3.08 or lower..........

What sort of deal for everything if...........If i get the rear also I would have to drive bb burb, 10 miles to the gallon, if i don't get the rear, the aveo, 35.

I will buy depending..........I am going to check the rotor width now.

I will be home from Thanksgiving dinner around 2, might be able to do it tomorrow depending on your schedule. I am trying to get a fender in clover

Thanks,
Steve

[qksilver]

Rock auto shows that it is 1.25 thick, I will go by where it's parked to be sure.

PM with a number and I can call after getting home.

Steve

[1980c-10 mybaby]

Originally Posted by qksilver

what thickness are the rotors? what shape are the inner fenders and the windshield?
What ratio is the rear?

I could come and get them Friday on my day off. Not sure what width the rotors are on a 78 2 wheel drive blazer.
Depending on the rear, looking for 3.08 or lower..........

What sort of deal for everything if...........If i get the rear also I would have to drive bb burb, 10 miles to the gallon, if i don't get the rear, the aveo, 35.

I will buy depending..........I am going to check the rotor width now.

I will be home from Thanksgiving dinner around 2, might be able to do it tomorrow depending on your schedule. I am trying to get a fender in clover

Thanks,
Steve

I will post pictures of everything when I get home.. Dash pad is brand new still in original box which it came it 10years ago... If I'm not mistaken reared is 3.07 gearing
Posted via Mobile Device

[BIGCHEVYMAN]

Next in line for dash pad.

[qksilver]

sounds good, it should be 3:08, great

Let me know, I am off tomorrow.

Thanks,
Steve

[qksilver]

checked again , on the inner fenders, if they are the ones for the truck in your avatar they won't work for me. If they are for a 73-80 style fender they will work.

So if they are 73-80 inner fenders I will buy them
I will buy the rear 3:07/08 gears, rotors and calipers , if they are for 1.25 rotors and the windshield if it is clear, no fogging or wiper marks.

I am off tomorrow and can come out if you le me know tonight.

Thanks,
Steve

[1980c-10 mybaby]

Yeah they are the fenders in my avatar... I will post a picture of the windshield and the rotors are 1.25 and I work tomorrow but I can meet you in my lunch is you wanna do that... Here is my zip code 28227... I'm not sure how far away you are but just google maps it and let me know cause my lunch is either 12 or 1 and we cancer if you wanna do that... Not interested in the dash pad anymore?
Posted via Mobile Device

[qksilver]

Dash pad/ nope that wasn't me. I would be able to the lunch time thing next Wednesday but unfortunately can't do a middle of the day thing tomorrow . It's about a 4 1/2 hour round trip with however long to load. The weather is supposed to be really nice and i need to get somethings done at the shop while it's warm. If it was morning or night no problem.

Would next Wednesday lunch be ok. Don't worry about the pix of the windshield, I can check it out when I come by.

Thanks,
Steve

[1980c-10 mybaby]

Yeah that works for me
Posted via Mobile Device

[1980c-10 mybaby]

Originally Posted by Blake_H

What kind of shape is the dash pad in? Do you have any photos of it?

Headling home now will post pictures in less than and hour
Posted via Mobile Device

[qksilver]

Thx, then Wednesday, pm me a number and address. I don't have a cell phone , by choice so I will call from home before i leave.

Thanks,
Steve

[1980c-10 mybaby]

Originally Posted by qksilver

Dash pad/ nope that wasn't me. I would be able to the lunch time thing next Wednesday but unfortunately can't do a middle of the day thing tomorrow . It's about a 4 1/2 hour round trip with however long to load. The weather is supposed to be really nice and i need to get somethings done at the shop while it's warm. If it was morning or night no problem.

Would next Wednesday lunch be ok. Don't worry about the pix of the windshield, I can check it out when I come by.

Thanks,
Steve

Just a heads up the rear end and rotors are 5x5 bolt pattern I wanna make sure that's what your looking for before you travel
Posted via Mobile Device

[Cheyenne Dan]

Is the gray carpet new in box? Is it dark or light gray and what brand? Thanks!
Posted via Mobile Device

[1980c-10 mybaby]

Here are pictures of the items

[1980c-10 mybaby]

Originally Posted by Cheyenne Dan

Is the gray carpet new in box? Is it dark or light gray and what brand? Thanks!
Posted via Mobile Device

According to LMC there is only one Gray for this year vehicle and thats where i ordered from

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=187

[qksilver]

yep, my 78 blazer is 2 wheel drive.

Thanks,
Steve

[1980c-10 mybaby]

Originally Posted by qksilver

yep, my 78 blazer is 2 wheel drive.

Thanks,
Steve

ok just wanted to make sure that was what you where looking for

[76stepsidechevy]

That carpet isn't for a tall trans tunnel by chance is it ?

[1980c-10 mybaby]

Originally Posted by 76stepsidechevy

That carpet isn't for a tall trans tunnel by chance is it ?

No sir it is not
Posted via Mobile Device

[qksilver]

checking back, was planning to come by your place tomorrow to get those parts. I don't have your number, address or know if I can come by..........Please let me know tonight, otherwise i will do something different.

Thanks,
Steve

[Blake_H]

Thanks for the photos, but I need a dash pad for an '81-'87 truck so I will have to pass.

[qksilver]

Haven't heard from you, so, I still want those parts, rear, calipers and rotors and the windshield. Can probably come over this coming Thursday.

Let me know.

Thanks,
Steve

[1980c-10 mybaby]

Originally Posted by qksilver

Haven't heard from you, so, I still want those parts, rear, calipers and rotors and the windshield. Can probably come over this coming Thursday.

Let me know.

Thanks,
Steve

Just started a new job work 7-7 everyday and Saturday 7-5 so Sunday is my only day and Saturday after work
Posted via Mobile Device