SC New 8" Dual Booster & Bracket set

[TobyArnot]

Thanksgiving special.
.
$220.00 FIRM plus shipping. Paypal- you pay fee.
.
All New Chrome Power Brake Booster Bracket Assembly, including firewall mount and pedal extension. New 8" dual diaphragm Booster. Includes rubber boot, check valve, nuts for studs and custom 4 deg. shims. Master cylinder is dual reservoir, 1-1/8 inch bore, Corvette style with 1/2 inch and 9/16 inch ports on one side. Has been prepped and painted with Eastwood Brake Grey paint. Includes deep core metal insert for power applications, plus bench bleeder kit. No Prop valve or lines. Add your own for disc/drum or drum/drum. Brand new, just bought recently, but got a new HydraBoost set-up and want to give it a try.
.
My total investment = $265. My loss is your gain

[scotts72heavyhalf]

Shipping to 97013 quote please or $220.00 shipped and I will take it?

[TobyArnot]

Thanks Scott,
.
I'll get shipping $$ tomorrow. I'll try to get it in a USPS Flat-Rate box. I really can't afford to eat the shipping.
Happy Thanksgiving

[scotts72heavyhalf]

Happy Thanksgiving to you as well, Do you know if there is any modification needed or just a portioning valve for our trucks and do you use the stock supports? I am doing a restomod on our 69C10 build and it already has a new PB system from ECE but it seems pretty weak, I am replacing all the brake lines your might be a nice touch to our project. If it bolts up could you keep me first in line and you think its a good fit for my application?

Thanks, Scott

[Rugman]

I will get in line for this. If scott passes I will take it.

[TobyArnot]

Originally Posted by scotts72heavyhalf

Happy Thanksgiving to you as well, Do you know if there is any modification needed or just a portioning valve for our trucks and do you use the stock supports? I am doing a restomod on our 69C10 build and it already has a new PB system from ECE but it seems pretty weak, I am replacing all the brake lines your might be a nice touch to our project. If it bolts up could you keep me first in line and you think its a good fit for my application?

Thanks, Scott

Scott, I had this ready to install on my '70, so it should be a go. I already had a new prop valve from my front disc conversion. That's why I didn't have a new prop. valve. You'll need a prop. valve/line kit. NOTE: the rear port is 9/16 (larger). You'll need to make sure the line kit will work. No big deal, just get the right ones first. You'll will also need to reuse the clevis on the pedal end of the rod.
.
P.S. - I just checked out the USPS Flat-rate boxes and the booster won't go. I'll have to round up a box and pack and weigh it first.
.
TO ALL: Thanks for your interest. I have a OEM take-off bracket set (kinda' ratty, but useable) and will post it later.

[scotts72heavyhalf]

OK, sounds good just waiting on the shipping cost but we should be all good to go, I have a new porp valve, just have to get a larger line to the porp valve made up.

[TobyArnot]

Morning Scott - PM sent

[scotts72heavyhalf]

Thanks, Pay-Pal sent

[TobyArnot]

SOLD - shipped -
Thanks Scott