s10 swappers brake line and proportioning valve questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nacho55 · 12-05-2011, 02:17 PM

I was at the junk yard yesterday and grabbed a proportioning valve from a 90's s10 blazer and didn't take note of which lines went to the front and which go to the rear, I just clipped the lines so I could keep the fittings, so does the fitting in the front go to the front brakes, and rear go to the back brakes. Thanks,.
Posted via Mobile Device

BlueJeep · 12-05-2011, 09:22 PM

Quote:

Originally Posted by nacho55

I was at the junk yard yesterday and grabbed a proportioning valve from a 90's s10 blazer and didn't take note of which lines went to the front and which go to the rear, I just clipped the lines so I could keep the fittings, so does the fitting in the front go to the front brakes, and rear go to the back brakes. Thanks,.
Posted via Mobile Device

The one with the 1/4" line is for the rear brakes, the 3/16" is for the front.

12-05-2011, 02:17 PM	#1
nacho55 Registered User Join Date: Oct 2010 Location: El Mirage AZ Posts: 169	s10 swappers brake line and proportioning valve questions I was at the junk yard yesterday and grabbed a proportioning valve from a 90's s10 blazer and didn't take note of which lines went to the front and which go to the rear, I just clipped the lines so I could keep the fittings, so does the fitting in the front go to the front brakes, and rear go to the back brakes. Thanks,. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.