Free parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bobs76 · 04-22-2003, 11:49 AM

OK so I am either sending the cab and wrecked frame to the wrecking yard or someone can have it. The cab is good other than where the #'s were, they were cut out. Some minor surface rust. Doors can be saved, they have some damage but not bad. If anyone need parts let me know.

alf4444 · 04-22-2003, 12:36 PM

I'll take the doors if they are in descent shape.

**old Rusty C10** · 04-22-2003, 01:22 PM

oh man if ya was only closer id be out there in a shot to pick it up but after my belly surgery i cant even drive to wal mart much less texas ( bein i am in NJ to begin with) lol if ya wanna deliver ( just kidding man)

Bobs76 · 04-22-2003, 01:48 PM

alf4444 The doors are decent, I will take some pics in a bit and post them.
old Rusty C10 If I had a vacation I would consider it..

CustomChevy · 04-22-2003, 03:34 PM

I would like seconds on those doors if "alf" doesn't take them. Let's see those pics!

Thanks

alf4444 · 04-22-2003, 03:36 PM

Pics would be great if it would be easier you can email them to me at awolfe@myriad-proteomics.com

Bobs76 · 04-22-2003, 03:58 PM

The right door has a dent where they opened the door after the wreck, not bad ,could be repaired.

Bobs76 · 04-22-2003, 03:59 PM

closer of dent

Bobs76 · 04-22-2003, 03:59 PM

inside

Bobs76 · 04-22-2003, 04:01 PM

left door has a crease that happened taking it off the trailer, it also got the bed I am using.

Bobs76 · 04-22-2003, 04:01 PM

closer of left dent

Bobs76 · 04-22-2003, 04:02 PM

inside left door

Bobs76 · 04-22-2003, 04:04 PM

All the glass is still good and the windows do roll up and down fairly easy.

alf4444 · 04-22-2003, 04:35 PM

what is the cost for shipping to 84116 business address?

Bobs76 · 04-22-2003, 04:50 PM

I have never shipped any large stuff before I will have to get a buddy to find out for me.

alf4444 · 04-22-2003, 04:53 PM

if you have a forward air close by that seems to be the cheapest but however you want to do it is fine by me.

Bobs76 · 04-22-2003, 05:16 PM

I will have to check our little airport here, I don't think we have one, I am pretty sure there is on at DFW though.

wlarue72 · 04-22-2003, 10:45 PM

Interested in the rear slider! What kind of shape is it in?

CustomChevy · 04-22-2003, 10:57 PM

I might be able to take the whole cab off your hands, gotta check space and get clearance from the wife. Are the mounts already removed?

If I am unable to keep the cab, I would like the rear window aluminum cab trim and also the inside aluminum trim at the inner rockers at the base of the seat.

Thanks!

Bobs76 · 04-23-2003, 07:29 AM

wlarue72 Sorry I got plans for the slider, I do have a flat rear glass though.

CustomChevy The mounts are not removed yet but the cab is yours if you want it. I just need to get rid of the thing. If anyone can use the parts then I would rather let it go that way instead of taking it to my buddy at the wrecking yard..

Bobs76 · 04-23-2003, 12:27 PM

I may have some more parts this weekend, A friend of my dads has a 79 lwb out at his acreage with no title, I need the front clip amd the rest will be left. I do not know the shape of the truck but if its any good then I will strip it..

Bobs76 · 04-23-2003, 12:52 PM

Anyone have an Idea of the weight of a fuly assembled door? I figured close to 75 - 100 lbs.

alf4444 the closest forward air is at dfw which is about 45 miles for me. I am checking the cost of shipping and will get back to you.

79BIG10 · 04-23-2003, 01:28 PM

Let me know if the 79 has tan interior. I'm looking for some door panels like I have now.

TX_Mudder · 04-24-2003, 08:26 AM

Are the seatbelts OK? If so, I need them. Email me at im_kyu@yahoo dot com

Thanks.
-- Mike

chevy68388 · 04-25-2003, 10:56 AM

how bout them gas tanks andf straps i need the driver side but i wouldnt mind getting both how much would shiping be

04-22-2003, 11:49 AM	#1
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Free parts OK so I am either sending the cab and wrecked frame to the wrecking yard or someone can have it. The cab is good other than where the #'s were, they were cut out. Some minor surface rust. Doors can be saved, they have some damage but not bad. If anyone need parts let me know. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 12:36 PM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	I'll take the doors if they are in descent shape. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-22-2003, 01:22 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,313	oh man if ya was only closer id be out there in a shot to pick it up but after my belly surgery i cant even drive to wal mart much less texas ( bein i am in NJ to begin with) lol if ya wanna deliver ( just kidding man) __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

04-22-2003, 01:48 PM	#4
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	alf4444 The doors are decent, I will take some pics in a bit and post them. old Rusty C10 If I had a vacation I would consider it.. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 03:34 PM	#5
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	Re: Doors I would like seconds on those doors if "alf" doesn't take them. Let's see those pics! Thanks

04-22-2003, 03:36 PM	#6
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Pics would be great if it would be easier you can email them to me at awolfe@myriad-proteomics.com __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-22-2003, 03:58 PM	#7
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Heres pics The right door has a dent where they opened the door after the wreck, not bad ,could be repaired. Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 03:59 PM	#8
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	closer of dent Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 03:59 PM	#9
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	inside Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 04:01 PM	#10
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	left door has a crease that happened taking it off the trailer, it also got the bed I am using. Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 04:01 PM	#11
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	closer of left dent Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 04:02 PM	#12
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	inside left door Attached Images __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 04:04 PM	#13
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	All the glass is still good and the windows do roll up and down fairly easy. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 04:35 PM	#14
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	what is the cost for shipping to 84116 business address? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-22-2003, 04:50 PM	#15
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I have never shipped any large stuff before I will have to get a buddy to find out for me. __________________ If it aint got t*ts or wheels I am not interested!!!!!!



Register or Log In To remove these advertisements.

04-22-2003, 04:53 PM	#16
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	if you have a forward air close by that seems to be the cheapest but however you want to do it is fine by me. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-22-2003, 05:16 PM	#17
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I will have to check our little airport here, I don't think we have one, I am pretty sure there is on at DFW though. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-22-2003, 10:45 PM	#18
wlarue72 Registered User Join Date: Nov 2002 Location: DFW Texas Posts: 244	Interested in the rear slider! What kind of shape is it in? __________________ 72 Cheyenne Super 402 daily driver. A lifetime project!

04-22-2003, 10:57 PM	#19
CustomChevy Registered User Join Date: Nov 2002 Posts: 461	I might be able to take the whole cab off your hands, gotta check space and get clearance from the wife. Are the mounts already removed? If I am unable to keep the cab, I would like the rear window aluminum cab trim and also the inside aluminum trim at the inner rockers at the base of the seat. Thanks!

04-23-2003, 07:29 AM	#20
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	wlarue72 Sorry I got plans for the slider, I do have a flat rear glass though. CustomChevy The mounts are not removed yet but the cab is yours if you want it. I just need to get rid of the thing. If anyone can use the parts then I would rather let it go that way instead of taking it to my buddy at the wrecking yard.. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-23-2003, 12:27 PM	#21
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I may have some more parts this weekend, A friend of my dads has a 79 lwb out at his acreage with no title, I need the front clip amd the rest will be left. I do not know the shape of the truck but if its any good then I will strip it.. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-23-2003, 12:52 PM	#22
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Anyone have an Idea of the weight of a fuly assembled door? I figured close to 75 - 100 lbs. alf4444 the closest forward air is at dfw which is about 45 miles for me. I am checking the cost of shipping and will get back to you. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

04-23-2003, 01:28 PM	#23
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Let me know if the 79 has tan interior. I'm looking for some door panels like I have now. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-24-2003, 08:26 AM	#24
TX_Mudder Registered User Join Date: Jun 2001 Location: Houston, TX Posts: 126	Are the seatbelts OK? If so, I need them. Email me at im_kyu@yahoo dot com Thanks. -- Mike __________________ http://home.houston.rr.com/chevy73/

04-25-2003, 10:56 AM	#25
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	how bout them gas tanks andf straps i need the driver side but i wouldnt mind getting both how much would shiping be __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

Register or Log In To remove these advertisements.