Picked up these Deep Dish Rallys for $200( Need Advise) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stevo427 · 12-17-2011, 08:07 PM

Bought these last night for my truck. Already Sandblasted before I bought them so I'm gonna take them into powder coating Monday. Came with a bunch of trim pieces and 3 sombrero caps. Only problem is there 15x10 and I'm not sure I want to run that in the front. The back will look great. I'm not sure if it will rub bad in the front but I figure I could try it and if it doesn't work out sell the front two for 15x8's. What do you think? I think the deep dish on all 4's around would look great

Test Fit

cdowns · 12-17-2011, 08:46 PM

i'd hold off going to the powdercoater till i had all 4 wheels that i was going to use to make sure all the wheels ended up the same color

i think your idea of getting 8" or even 7" for the front is the best way to go

muleys67 · 12-17-2011, 09:46 PM

Sir,I have a set of 8" 6 lug,willing to swap two 8s for two 10s. Going on my stepside.Im in east tennessee. Muley

502ms · 12-18-2011, 04:09 AM

I agree. Good deal right there. Jump on the swap for 8's in the front. 10s can't do it.
Posted via Mobile Device

big_al_71 · 12-18-2011, 09:44 AM

I would definetly look into something narrower for the front it will look great with the staggered look..

Midniteotto · 12-18-2011, 10:10 AM

Quote:

Originally Posted by 502ms

I agree. Good deal right there. Jump on the swap for 8's in the front. 10s can't do it.
Posted via Mobile Device

cdowns · 12-18-2011, 10:49 AM

maybe not so good a deal if shipping costs are required to his unknown location

8" wheels come up on a regular basis here pretty cheap with no costs with shipping

Stevo427 · 12-18-2011, 02:54 PM

Quote:

Originally Posted by muleys67

Sir,I have a set of 8" 6 lug,willing to swap two 8s for two 10s. Going on my stepside.Im in east tennessee. Muley

Think I can get some pictures?. I live in California so I might get raped by shipping out to there. I cant seem to find these style Rallys anywhere on craigslist in CA. Only the truck version in 6 lugs.

cdowns · 12-18-2011, 03:03 PM

summit sells them 8" 6lug wheel vintiques silver factory finish for less than $60each brand new llast time i looked

Stevo427 · 12-18-2011, 03:15 PM

Quote:

Originally Posted by cdowns

summit sells them 8" 6lug wheel vintiques silver factory finish for less than $60each brand new llast time i looked

Thanks I'm just going to buy them off there. 4 Inch backspacing sounds good for the front I'd think correct?

Stevo427 · 12-18-2011, 03:32 PM

2 of them are on San Diego craigslist if anyone wants to grab them.

BLAZERMAN · 12-18-2011, 03:56 PM

Those would look Great on a 4x4 with some 35s wrapped around them! Just as a precaution you better check them for trueness before powder coating..they can be a nightmare to ballance at that size.

71swb4x4 · 12-18-2011, 03:57 PM

I would wait to sell until you know for certain that you have 2 good wheels on your truck.

muleys67 · 12-18-2011, 04:10 PM

Stevo,Im about 45 miles west of Knoxville.Im sure shipping to Cali would be a killer.Keep looking,8s will show up nearer to you.Good luck. Muley

tubbedII · 12-19-2011, 03:47 PM

10's on the front is possible, depending on how low you are. My bro had 10's on the front with about a 3/5 drop...it was received lowered so we never knew the real drop, but that's my guess. After he swapped to drop spindles, the 10's had to go fo a set of 8's, but IMO the 10's looked cooler. Sorry, but this was over 10 years ago, so I don't really know any details about the wheels like backspacing...but they had at least 295's wrapped around them.

12-17-2011, 08:07 PM	#1
Stevo427 Registered User Join Date: Sep 2011 Location: United States Posts: 163	Picked up these Deep Dish Rallys for $200( Need Advise) Bought these last night for my truck. Already Sandblasted before I bought them so I'm gonna take them into powder coating Monday. Came with a bunch of trim pieces and 3 sombrero caps. Only problem is there 15x10 and I'm not sure I want to run that in the front. The back will look great. I'm not sure if it will rub bad in the front but I figure I could try it and if it doesn't work out sell the front two for 15x8's. What do you think? I think the deep dish on all 4's around would look great Test Fit

12-17-2011, 08:46 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Picked up these Deep Dish Rallys for $200( Need Advise) i'd hold off going to the powdercoater till i had all 4 wheels that i was going to use to make sure all the wheels ended up the same color i think your idea of getting 8" or even 7" for the front is the best way to go __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-17-2011, 09:46 PM	#3
muleys67 Registered User Join Date: Nov 2006 Location: Roane County,Tennessee Posts: 97	Re: Picked up these Deep Dish Rallys for $200( Need Advise) Sir,I have a set of 8" 6 lug,willing to swap two 8s for two 10s. Going on my stepside.Im in east tennessee. Muley

12-18-2011, 04:09 AM	#4
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Picked up these Deep Dish Rallys for $200( Need Advise) I agree. Good deal right there. Jump on the swap for 8's in the front. 10s can't do it. Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

12-18-2011, 09:44 AM	#5
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Picked up these Deep Dish Rallys for $200( Need Advise) I would definetly look into something narrower for the front it will look great with the staggered look.. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

12-18-2011, 10:49 AM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Picked up these Deep Dish Rallys for $200( Need Advise) maybe not so good a deal if shipping costs are required to his unknown location 8" wheels come up on a regular basis here pretty cheap with no costs with shipping __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-18-2011, 03:03 PM	#9
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Picked up these Deep Dish Rallys for $200( Need Advise) summit sells them 8" 6lug wheel vintiques silver factory finish for less than $60each brand new llast time i looked __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-18-2011, 03:32 PM	#11
Stevo427 Registered User Join Date: Sep 2011 Location: United States Posts: 163	Re: Picked up these Deep Dish Rallys for $200( Need Advise) 2 of them are on San Diego craigslist if anyone wants to grab them.

12-18-2011, 03:56 PM	#12
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: Picked up these Deep Dish Rallys for $200( Need Advise) Those would look Great on a 4x4 with some 35s wrapped around them! Just as a precaution you better check them for trueness before powder coating..they can be a nightmare to ballance at that size. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

12-18-2011, 03:57 PM	#13
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Picked up these Deep Dish Rallys for $200( Need Advise) I would wait to sell until you know for certain that you have 2 good wheels on your truck. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-18-2011, 04:10 PM	#14
muleys67 Registered User Join Date: Nov 2006 Location: Roane County,Tennessee Posts: 97	Re: Picked up these Deep Dish Rallys for $200( Need Advise) Stevo,Im about 45 miles west of Knoxville.Im sure shipping to Cali would be a killer.Keep looking,8s will show up nearer to you.Good luck. Muley

12-19-2011, 03:47 PM	#15
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Picked up these Deep Dish Rallys for $200( Need Advise) 10's on the front is possible, depending on how low you are. My bro had 10's on the front with about a 3/5 drop...it was received lowered so we never knew the real drop, but that's my guess. After he swapped to drop spindles, the 10's had to go fo a set of 8's, but IMO the 10's looked cooler. Sorry, but this was over 10 years ago, so I don't really know any details about the wheels like backspacing...but they had at least 295's wrapped around them. __________________ 1970 2wd Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.