NC Edelbrock intakes and bench seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

frednoah · 12-29-2011, 08:16 AM

I have two Edelbrock Performer intakes for small block chevy engines. Both are part # 2101. No stripped holes, but could use some light cleaning before bolting on. Looking for $50 each plus shipping.

Also have the seat I just removed from my 69. Seat tracks included. It is in pretty good shape, but I found a really good deal on a black one with the scroll pattern, so this one had to go. Would be a good seat to use in a driven truck, or to replace one with a ripped up cover.

Has the typical sagging on the drivers side that you would expect out of a 40 year old seat. Only time I really noticed it was entry and exit of the truck. Once I was in, I had zero problems finding a comfortable driving position.
$40 or best offer, picked up in either Charlotte NC or Mooresville NC

tanman722001 · 12-29-2011, 09:19 AM

im interested in the seat.is it the one in the pic?If so I will take it.PM me your number so we can make arrangements.Thanks Tony

bigguy69 · 12-29-2011, 10:20 AM

i would be intersted in an intake can i see some pictures?

47thriftmaster · 12-29-2011, 10:39 AM

I would be interested in a intake as well, pending pics.

frednoah · 12-29-2011, 11:13 AM

The seat is the one in the picture. As with most things, I would caution that the picture looks a little better than reality. Will pm you my # tonite after work.

Will get pictures of the intakes posted this evening.
Posted via Mobile Device

kellytheaker · 12-29-2011, 11:57 AM

thanks interested in intakes as well

frednoah · 12-29-2011, 08:28 PM

Sorry for the crappy picture. I can't find the camera, so I had to email one from the phone.

Neither intake has been cleaned up. Some soapy water would remove all of the dust/dirt seen in the picture.

Carb pads are both in good shape, as are the surfaces that mate to the heads. Didn't find the first stripped thread on either intake.

bigguy69 · 12-29-2011, 09:56 PM

How much would it cost to ship to 28752 . Marion NC. Thank you.
Posted via Mobile Device

frednoah · 12-29-2011, 10:05 PM

I'll get you a quote tomorrow, but typically I have shipped aluminum intakes in the $20 range.

47thriftmaster · 12-29-2011, 11:01 PM

Sorry, I'm going to have to pass on the intake right now. Thank you

kellytheaker · 12-30-2011, 05:58 PM

both still available

frednoah · 12-30-2011, 06:03 PM

Just sent a shipping quote to bigguy69, if he passes both are still available. Pm coming your way kellytheaker.

frednoah · 01-02-2012, 09:30 PM

Both intakes sold to kellytheaker pending payment.

tanman722001 has dibs on the seat, just waiting to see if/when he can make it down to pick it up.

**truckdude239** · 01-26-2012, 12:23 PM

if he passes put me in line for the seat if it is still available

tjvending · 01-26-2012, 09:00 PM

Quote:

Originally Posted by frednoah

Both intakes sold to kellytheaker pending payment.

tanman722001 has dibs on the seat, just waiting to see if/when he can make it down to pick it up.

seat still available?

TJ

frednoah · 01-26-2012, 09:14 PM

Sorry for not updating the thread guys, the seat did go to tanman722001. I think it's already in his truck.

12-29-2011, 08:16 AM	#1
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Edelbrock intakes and bench seat I have two Edelbrock Performer intakes for small block chevy engines. Both are part # 2101. No stripped holes, but could use some light cleaning before bolting on. Looking for $50 each plus shipping. Also have the seat I just removed from my 69. Seat tracks included. It is in pretty good shape, but I found a really good deal on a black one with the scroll pattern, so this one had to go. Would be a good seat to use in a driven truck, or to replace one with a ripped up cover. Has the typical sagging on the drivers side that you would expect out of a 40 year old seat. Only time I really noticed it was entry and exit of the truck. Once I was in, I had zero problems finding a comfortable driving position. $40 or best offer, picked up in either Charlotte NC or Mooresville NC

12-29-2011, 09:19 AM	#2
tanman722001 Registered User Join Date: Oct 2010 Location: Mocksville,NC Posts: 419	Re: Edelbrock intakes and bench seat im interested in the seat.is it the one in the pic?If so I will take it.PM me your number so we can make arrangements.Thanks Tony __________________ 1991 GMC K2500 4X4 350/auto 1991 Chevy S10 ext cab. 1990 Chevy S10 1993 Chevy S10 Blazer 4dr 4.3 Vortex/Auto

12-29-2011, 10:20 AM	#3
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Edelbrock intakes and bench seat i would be intersted in an intake can i see some pictures? __________________ members met: redbaron69, billsbowtie,nc67

12-29-2011, 10:39 AM	#4
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Edelbrock intakes and bench seat I would be interested in a intake as well, pending pics.

12-29-2011, 11:13 AM	#5
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Edelbrock intakes and bench seat The seat is the one in the picture. As with most things, I would caution that the picture looks a little better than reality. Will pm you my # tonite after work. Will get pictures of the intakes posted this evening. Posted via Mobile Device

12-29-2011, 11:57 AM	#6
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Edelbrock intakes and bench seat thanks interested in intakes as well

12-29-2011, 08:28 PM	#7
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Edelbrock intakes and bench seat Sorry for the crappy picture. I can't find the camera, so I had to email one from the phone. Neither intake has been cleaned up. Some soapy water would remove all of the dust/dirt seen in the picture. Carb pads are both in good shape, as are the surfaces that mate to the heads. Didn't find the first stripped thread on either intake.

12-29-2011, 09:56 PM	#8
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Edelbrock intakes and bench seat How much would it cost to ship to 28752 . Marion NC. Thank you. Posted via Mobile Device __________________ members met: redbaron69, billsbowtie,nc67

12-29-2011, 10:05 PM	#9
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Edelbrock intakes and bench seat I'll get you a quote tomorrow, but typically I have shipped aluminum intakes in the $20 range.

12-29-2011, 11:01 PM	#10
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Edelbrock intakes and bench seat Sorry, I'm going to have to pass on the intake right now. Thank you

12-30-2011, 05:58 PM	#11
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Edelbrock intakes and bench seat both still available

12-30-2011, 06:03 PM	#12
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Edelbrock intakes and bench seat Just sent a shipping quote to bigguy69, if he passes both are still available. Pm coming your way kellytheaker.

01-02-2012, 09:30 PM	#13
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Edelbrock intakes and bench seat Both intakes sold to kellytheaker pending payment. tanman722001 has dibs on the seat, just waiting to see if/when he can make it down to pick it up.

01-26-2012, 12:23 PM	#14
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Edelbrock intakes and bench seat if he passes put me in line for the seat if it is still available __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-26-2012, 09:14 PM	#16
frednoah 86 Scottsdale Join Date: May 2010 Location: Mooresville NC Posts: 473	Re: Edelbrock intakes and bench seat Sorry for not updating the thread guys, the seat did go to tanman722001. I think it's already in his truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.