might run my truck friday night - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 04-23-2003, 11:17 PM

yeah, i think i'm gonna take my girlfriend out to thunder valley friday, and possibly run my truck if i see somebody i know up there to go against

cochino12 · 04-23-2003, 11:32 PM

what do you think you'll run?

ocbaud · 04-23-2003, 11:34 PM

Quote:

Originally posted by cochino12
what do you think you'll run?

low 16's

*1FaastC10* · 04-23-2003, 11:49 PM

Quote:

Originally posted by ocbaud

low 16's

keep dreaming...

ocbaud · 04-23-2003, 11:54 PM

Quote:

Originally posted by 1FaastC10

keep dreaming...

i have a good running 305

*1FaastC10* · 04-24-2003, 12:53 AM

and 2.73 gears if i remember correctly, like i said... keep dreaming...

gchemist · 04-24-2003, 01:44 AM

If I could make it I'd smoke you.

low 84 · 04-24-2003, 04:07 AM

i would guess high 17's. seriously man, 200 hp and 2.73 gears dosen't equal fast

*1FaastC10* · 04-24-2003, 04:48 AM

3.08 gears and 300hp does though, or so i used to think.

LOHRTBT · 04-24-2003, 05:16 PM

Yeah....Eric....I would shoot for mid to high 17's... and be happy if its faster.

I will be out there...just look for me....and NO im not running yet!! haha I wouldnt wanna embarrass you

TIMSPEED · 04-24-2003, 06:39 PM

What about
3750lbs + 225rwhp + 3.73 posi + sticky tires = ???

bagged81 · 04-24-2003, 06:55 PM

Quote:

Originally posted by ocbaud

low 16's

If its anything slower than low 14's, then why even bother running it, unless its free. I am not even going to waste my time running my 305.

LOHRTBT · 04-24-2003, 07:41 PM

lmao!! Well put Bagged81!! But it is still fun if you have never done it.

BaggedC10 · 04-24-2003, 08:30 PM

Quote:

Originally posted by low 84
i would guess high 17's. seriously man, 200 hp and 2.73 gears dosen't equal fast

Last I looked, a factory 305 only produced 145hp in 1986. Or is this just California trucks...???

apstguy · 04-24-2003, 09:09 PM

My '85 is said to make 160hp with CA emissions. I looked it up in my resoration pack. A "normal" or federal 305 make 165hp.

Quote:

Originally posted by LowC10

Last I looked, a factory 305 only produced 145hp in 1986. Or is this just California trucks...???

*rage'nrat638* · 04-24-2003, 09:23 PM

i hope i am in the low 16's

hay just noticed this post is my 454th post 454

84Stepper · 04-24-2003, 10:12 PM

If my truck wasnt getting painted I would like to put your truck to shame friday. I might go out there tho so maybe I will see some of you guys.

gldevall · 04-24-2003, 10:23 PM

Quote:

Originally posted by 84Stepper
If my truck wasnt getting painted I would like to put your truck to shame friday. I might go out there tho so maybe I will see some of you guys.

84Stepper, have you ever ran your truck? If so, what did it run?

84Stepper · 04-24-2003, 10:29 PM

I ran my truck with my friends g-tech pro and it ran a mid 15. But that was without cam, headers, ignition. I dont know how accurate those things are tho. All I need is gears and Im thinking low-mid 14's.

gldevall · 04-24-2003, 10:48 PM

Cool, b/c I have pretty much the same set-up. I'm going to run mine for about a month before I take it to the track.

84Stepper · 04-24-2003, 10:51 PM

Good idea, because you dont wanna mess up that engine! What gears do you have? I want gears so bad but I have too much other stuff to buy right now.

84Stepper · 04-24-2003, 10:57 PM

Hey Mike Aka Swervin Ervin, What does your truck run I always wanted to know?

low 84 · 04-24-2003, 11:20 PM

Quote:

Originally posted by 84Stepper
Hey Mike Aka Swervin Ervin, What does your truck run I always wanted to know?

i'm not sure if he has run it but i would guess with 400 hp and his gears and posi with a 700r if he hooked up off the line it would probly run a high 13.

TIMSPEED · 04-25-2003, 04:26 AM

www.smokemup.com then go to Auto Math, then to HP from MPH, it's always fun to play with that. It's actually pretty damn accurate!

gldevall · 04-25-2003, 08:09 AM

Quote:

Originally posted by 84Stepper
Good idea, because you dont wanna mess up that engine! What gears do you have? I want gears so bad but I have too much other stuff to buy right now.

I'm running the stoc 2.73's for now with the one tire spinning. I plan on putting an Auburbn posi Unit with 3.42's.

04-23-2003, 11:17 PM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	might run my truck friday night yeah, i think i'm gonna take my girlfriend out to thunder valley friday, and possibly run my truck if i see somebody i know up there to go against

04-24-2003, 01:44 AM	#7
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	If I could make it I'd smoke you. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

04-24-2003, 04:07 AM	#8
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i would guess high 17's. seriously man, 200 hp and 2.73 gears dosen't equal fast __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-24-2003, 05:16 PM	#10
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Yeah....Eric....I would shoot for mid to high 17's... and be happy if its faster. I will be out there...just look for me....and NO im not running yet!! haha I wouldnt wanna embarrass you __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-24-2003, 06:39 PM	#11
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	What about 3750lbs + 225rwhp + 3.73 posi + sticky tires = ??? __________________ I have a few cars... See Them Here

04-23-2003, 11:32 PM	#2
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	what do you think you'll run?

04-24-2003, 12:53 AM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	and 2.73 gears if i remember correctly, like i said... keep dreaming...

04-24-2003, 04:48 AM	#9
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	3.08 gears and 300hp does though, or so i used to think.

04-24-2003, 07:41 PM	#13
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	lmao!! Well put Bagged81!! But it is still fun if you have never done it. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-24-2003, 09:23 PM	#16
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	i hope i am in the low 16's hay just noticed this post is my 454th post 454 Last edited by rage'nrat638; 04-24-2003 at 09:26 PM.

04-24-2003, 10:12 PM	#17
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	If my truck wasnt getting painted I would like to put your truck to shame friday. I might go out there tho so maybe I will see some of you guys. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

04-24-2003, 10:29 PM	#19
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	I ran my truck with my friends g-tech pro and it ran a mid 15. But that was without cam, headers, ignition. I dont know how accurate those things are tho. All I need is gears and Im thinking low-mid 14's. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

04-24-2003, 10:48 PM	#20
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Cool, b/c I have pretty much the same set-up. I'm going to run mine for about a month before I take it to the track. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

04-24-2003, 10:51 PM	#21
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Good idea, because you dont wanna mess up that engine! What gears do you have? I want gears so bad but I have too much other stuff to buy right now. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

04-24-2003, 10:57 PM	#22
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Hey Mike Aka Swervin Ervin, What does your truck run I always wanted to know? __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi



Register or Log In To remove these advertisements.

04-25-2003, 04:26 AM	#24
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	www.smokemup.com then go to Auto Math, then to HP from MPH, it's always fun to play with that. It's actually pretty damn accurate! __________________ I have a few cars... See Them Here

Register or Log In To remove these advertisements.