interchange parts for 84 2wd suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spiderjr · 04-25-2003, 03:50 PM

Hi I have an 84 Suburban and I am looking for some good sources for interchangeable parts lists. Can any one help me. Specifically changing for the tailgatre configuration to a barn door style area. Also which model and make trucks/suburban bench seats will fit without making auterations? Thanks

apstguy · 04-25-2003, 05:14 PM

I don't have much Suburban experience, but I think Suburbans never really changed through the years. Rear seats were identical 78-85 & middle seat was 74-87.

gchemist · 04-26-2003, 11:36 PM

spiderjr,
Welcome to the site. Order a free catalogue from www.lmctruck.com. Order the truck and suburban catalogues. You'll find all kinds of interchangeble parts. I'm going to use Suburban front A-arms and sway bar when I rebuild the font end on my truck.

The tailgate to barn door conversion has been done but I've never seen one. I'm sure it will take some pretty crafty welding and cutting. Someone asked the same question a while back.

apstguy · 04-27-2003, 12:46 AM

Are the Suburban A-Arms beefier? I know that sway bar would help a ton! I'm going to go get one from a 3/4 ton 91 Suburban at the junkyard.

04-25-2003, 03:50 PM	#1
spiderjr Registered User Join Date: Apr 2003 Location: south carolina Posts: 3	interchange parts for 84 2wd suburban Hi I have an 84 Suburban and I am looking for some good sources for interchangeable parts lists. Can any one help me. Specifically changing for the tailgatre configuration to a barn door style area. Also which model and make trucks/suburban bench seats will fit without making auterations? Thanks __________________ 55 chevy 4 dr sta wagon,64 Ford Galaxie HT 84 GMC Suburban,95 Dodge 2500 Conversion Van 79 RS Camaro (gave to nephew) 88 Scirocco x 2,86 VW Scirocco,87 Scirocco 88 VW GTI,86 Jetta GLI (sold),2004 Jetta Wagon TDI

04-25-2003, 05:14 PM	#2
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	I don't have much Suburban experience, but I think Suburbans never really changed through the years. Rear seats were identical 78-85 & middle seat was 74-87. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

04-26-2003, 11:36 PM	#3
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	spiderjr, Welcome to the site. Order a free catalogue from www.lmctruck.com. Order the truck and suburban catalogues. You'll find all kinds of interchangeble parts. I'm going to use Suburban front A-arms and sway bar when I rebuild the font end on my truck. The tailgate to barn door conversion has been done but I've never seen one. I'm sure it will take some pretty crafty welding and cutting. Someone asked the same question a while back. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

04-27-2003, 12:46 AM	#4
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Are the Suburban A-Arms beefier? I know that sway bar would help a ton! I'm going to go get one from a 3/4 ton 91 Suburban at the junkyard. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.