Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-14-2012, 09:04 PM | #1 |
Registered User
Join Date: Aug 2002
Location: Melville, SK
Posts: 1,144
|
1 set of components enough?
I'm working on piecing together a stereo system for my 69 GMC. I want to do more of a sound quality setup, don't care much for blaring loud or too much bass these days (getting old at 26 I guess?). My sister's boyfriend has some unused Focal KRX2 components that he wants to sell cheap. They are still more than I planned to spend, but I know what these things are worth and I might as well help them out. They will be either be in fiberglass kick panels or installed on the bottom of the door in fiberglass enclosures. I'm planning to do either a couple 10" or one 12" Alpine Type R. Sub box/amp rack will be built for the space where the fuel tank used to be, and there should be room for additional speakers as well if needed. What I am curious about is if one set of quality components will be adequate, and if not what would be recommended to accompany them (as well as recommended placement)? Both would be running off the same amp, so the second set of speakers should handle the same power as the Focals (100rms, 2 ohms).
__________________
2004 Silverado - Beater 1969 GMC - In progress http://67-72chevytrucks.com/vboard/s...d.php?t=441683 2011 Aveo - Work commuter 2013 Crestliner Fish Hawk 1650 - The reason no work gets done on the project truck. |
01-14-2012, 09:22 PM | #2 |
Registered User
Join Date: Sep 2010
Location: Richmond, Va
Posts: 573
|
Re: 1 set of components enough?
I put two 4 inch focals in the factory speaker location and the seperation is incredible. I have two 6.5 focals under the bucket seats and a 10 in sub in the center console. 2 amps are under the bucket seats also.
|
01-14-2012, 09:30 PM | #3 |
Registered User
Join Date: Mar 2011
Location: Bandera, Texas
Posts: 251
|
Re: 1 set of components enough?
One good set should be fine especially in a regular cab truck and that is a really nice set of speakers. Much easier to balance and get proper definition from. Just my opinion...
|
01-14-2012, 10:10 PM | #4 | |
Registered User
Join Date: Aug 2002
Location: Melville, SK
Posts: 1,144
|
Re: 1 set of components enough?
Quote:
Posted via Mobile Device
__________________
2004 Silverado - Beater 1969 GMC - In progress http://67-72chevytrucks.com/vboard/s...d.php?t=441683 2011 Aveo - Work commuter 2013 Crestliner Fish Hawk 1650 - The reason no work gets done on the project truck. |
|
01-15-2012, 07:04 AM | #5 |
Registered User
Join Date: Sep 2010
Location: Richmond, Va
Posts: 573
|
Re: 1 set of components enough?
yes in the center of the dash under the perforated area.
|
01-15-2012, 10:05 PM | #6 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: 1 set of components enough?
Yes, a well placed quality set can sound amazing. I had a pair of 6.5 MB Quart's in my Toyota with 2 8" subs. Sounded incredible and took up very little room. I am going a bit higher on the '66, though.
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
Bookmarks |
|
|