New Member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Relentless · 01-16-2012, 05:36 PM

My name is Kyle, I am from Whiteman AFB, Missouri and just scooped up a new project after following this site for a little bit, I thought I would dig into a longbed project. Here is my truck. $850 5.7 V8 SBC, rebuilt tranny and the usual tired motor probably the fourth one that has been in the truck. I look forward to keeping up with the forum and getting some good ideas.

MCCLELLAN103 · 01-16-2012, 06:01 PM

Welcome, nice truck ya got there.

JRANGER · 01-16-2012, 06:10 PM

Welcome!

canadian trucker · 01-16-2012, 06:20 PM

Welcome, from the snow less north.

Relentless · 01-16-2012, 06:46 PM

Thanks guys! Yea...snowless... we have only had two snows accumulating about 2 inches total. So Missouri hasn't really gotten any...shockingly.

Car'n'Guitars · 01-16-2012, 07:14 PM

Welcome to the board very nice truck, do you have any plans for it?

**Corts60** · 01-16-2012, 07:36 PM

Very clean. That grill is my favorite for all the 81-87 trucks.

**old Rusty C10** · 01-16-2012, 08:00 PM

welcome aboard nice truck... what are the plans?

Relentless · 01-16-2012, 10:03 PM

Quote:

Originally Posted by Car'n'Guitars

Welcome to the board very nice truck, do you have any plans for it?

Thanks appreciate it! Yea the 83 has a pretty clean body...its been body filled and beat up a little bit... but with a little work we will see. Not exactly sure the route...being a 2 wheel drive truck it will have to be set up with a street feel. I plan on taking it project by project. I first plan to replace the transmission filter and pan gasket, fix the speedo after snagging a gear from the local transmission shop, cleaning up the dirty engine bay...just swapped out plugs and plug wires and threw a new air filter on it.... the simple stuff is always fun. Gotta fix the exhaust leak and rebuild or atleast swap the carb out... but like I said project by project lol. Interior is gonna be a pretty large focus after finishing the bed lining. But I am excited to get to work on it.

Car'n'Guitars · 01-16-2012, 10:45 PM

Quote:

Originally Posted by Relentless

Thanks appreciate it! Yea the 83 has a pretty clean body...its been body filled and beat up a little bit... but with a little work we will see. Not exactly sure the route...being a 2 wheel drive truck it will have to be set up with a street feel. I plan on taking it project by project. I first plan to replace the transmission filter and pan gasket, fix the speedo after snagging a gear from the local transmission shop, cleaning up the dirty engine bay...just swapped out plugs and plug wires and threw a new air filter on it.... the simple stuff is always fun. Gotta fix the exhaust leak and rebuild or atleast swap the carb out... but like I said project by project lol. Interior is gonna be a pretty large focus after finishing the bed lining. But I am excited to get to work on it.

At least your starting with a very nice truck, so your keeping it basic for right now.

**N2TRUX** · 01-16-2012, 11:39 PM

Welcome to the forum Relentless. Like everyone has said, thats a nice clean start on a fun project. Keep us updated.

silvereagle07 · 01-17-2012, 12:45 PM

Relentless · 01-17-2012, 06:45 PM

Quote:

Originally Posted by N2TRUX

Welcome to the forum Relentless. Like everyone has said, thats a nice clean start on a fun project. Keep us updated.

Will do for sure...there won't be a build thread yet, but I will keep my photos and projects together for it later down the road.

vegas80step · 01-17-2012, 08:18 PM

welcome, looks like you got a nice truck to start messing with...

cwindham · 01-17-2012, 09:19 PM

Welcome man! You have definitely come to the right place. Nice lookin truck!

Smoke_Dog · 01-17-2012, 09:20 PM

Welcome!!! Had some friends stationed there, as SP's!!!

76Charlie · 01-18-2012, 12:33 AM

HI! welcome!

DanSan c 10 · 01-18-2012, 12:41 AM

Welcome to the forum from San Diego CA USA, Perfect price to get you going.

Gordonr1973 · 01-18-2012, 03:28 AM

Wow! Nice truck!!

Relentless · 01-18-2012, 07:24 PM

Quote:

Originally Posted by DanSan c 10

Welcome to the forum from San Diego CA USA, Perfect price to get you going.

Yea really couldn't beat it at all! I had to scoop it up!

Relentless · 01-21-2012, 07:25 PM

Transmission Filter was a *****... found out I have a 700r4 not the turbo350 I thought originally...and after two trips to the parts store... I got lucky and found some great used tires and swapped them out for the two front which are rotted beyond holding anything longer than 2 days, so by mounting and balancing them by myself at Auto Hobby I saved a killing.

76Charlie · 01-22-2012, 12:03 PM

Great! ALways great to discover ways to save money!

01-16-2012, 05:36 PM	#1
Relentless Registered User Join Date: Jan 2012 Location: Whiteman AFB, Missouri Posts: 14	New Member My name is Kyle, I am from Whiteman AFB, Missouri and just scooped up a new project after following this site for a little bit, I thought I would dig into a longbed project. Here is my truck. $850 5.7 V8 SBC, rebuilt tranny and the usual tired motor probably the fourth one that has been in the truck. I look forward to keeping up with the forum and getting some good ideas.

01-16-2012, 06:01 PM	#2
MCCLELLAN103 Registered User Join Date: Jun 2010 Location: Tulsa, OK Posts: 85	Re: New Member Welcome, nice truck ya got there. __________________ To Broke to be Fast

01-16-2012, 06:10 PM	#3
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: New Member Welcome!

01-16-2012, 06:20 PM	#4
canadian trucker A day should have 30 hours. Join Date: Jul 2005 Location: BC, Canada Posts: 248	Re: New Member Welcome, from the snow less north.

01-16-2012, 06:46 PM	#5
Relentless Registered User Join Date: Jan 2012 Location: Whiteman AFB, Missouri Posts: 14	Re: New Member Thanks guys! Yea...snowless... we have only had two snows accumulating about 2 inches total. So Missouri hasn't really gotten any...shockingly.

01-16-2012, 07:14 PM	#6
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: New Member Welcome to the board very nice truck, do you have any plans for it? __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

01-16-2012, 07:36 PM	#7
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,689	Re: New Member Very clean. That grill is my favorite for all the 81-87 trucks. __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(winter unit)https://67-72chevytrucks.com/vboard/...25#post8900725

01-16-2012, 08:00 PM	#8
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: New Member welcome aboard nice truck... what are the plans? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-16-2012, 11:39 PM	#11
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: New Member Welcome to the forum Relentless. Like everyone has said, thats a nice clean start on a fun project. Keep us updated. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-17-2012, 12:45 PM	#12
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: New Member __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

01-17-2012, 08:18 PM	#14
vegas80step Registered User Join Date: Jul 2011 Location: Las Vegas, NV Posts: 329	Re: New Member welcome, looks like you got a nice truck to start messing with... __________________ I drive a lowered Chevy, a lifted Ford and I have a 62 VW bug stripped down in the garage. Which "Piss on" sticker do I buy?

01-17-2012, 09:19 PM	#15
cwindham Registered User Join Date: Jul 2011 Location: Sanford, NC Posts: 54	Re: New Member Welcome man! You have definitely come to the right place. Nice lookin truck! __________________ *1984 Chevrolet Silverado*

01-17-2012, 09:20 PM	#16
Smoke_Dog Registered User Join Date: Feb 2008 Location: Hickory, NC native, but stuck in Valdosta, Ga Posts: 615	Re: New Member Welcome!!! Had some friends stationed there, as SP's!!!

01-18-2012, 12:33 AM	#17
76Charlie Registered User Join Date: Jan 2012 Location: henderson nevada Posts: 200	Re: New Member HI! welcome!

01-18-2012, 12:41 AM	#18
DanSan c 10 Registered User Join Date: Jan 2012 Location: Chula Vista, CA Posts: 109	Re: New Member Welcome to the forum from San Diego CA USA, Perfect price to get you going. __________________ Why can't I find it until the last place looked? 65 Longbed 283 three on the tree. 66 Longbed 292 three on the tree.Pennys A/C Trucks made in USA Buy a much as you can, Made in the USA



Register or Log In To remove these advertisements.

01-18-2012, 03:28 AM	#19
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: New Member Wow! Nice truck!! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

01-21-2012, 07:25 PM	#21
Relentless Registered User Join Date: Jan 2012 Location: Whiteman AFB, Missouri Posts: 14	Re: New Member Transmission Filter was a *****... found out I have a 700r4 not the turbo350 I thought originally...and after two trips to the parts store... I got lucky and found some great used tires and swapped them out for the two front which are rotted beyond holding anything longer than 2 days, so by mounting and balancing them by myself at Auto Hobby I saved a killing.

01-22-2012, 12:03 PM	#22
76Charlie Registered User Join Date: Jan 2012 Location: henderson nevada Posts: 200	Re: New Member Great! ALways great to discover ways to save money! __________________ 1976 GMC SIERRA CLASSIC CAMPER SPECIAL! 454 BIG BLOCK BABY!

Register or Log In To remove these advertisements.