It's A Family Tradition - Project 67 C10 Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Outshined · 01-17-2012, 08:32 AM

Here are the humble beginnings of my Project 67.........

August 2011

77chris03 · 01-17-2012, 08:52 AM

what are your plans? pics of the bed?

Outshined · 01-17-2012, 09:00 AM

Hey Chris.....I have a ton of pics Ill upload this afternoon and I'll lay out the plans too! ......late for work, but HAD TO get this started.

cobra_4 · 01-17-2012, 10:51 AM

Looks like a project and a half!!!!

Outshined · 01-17-2012, 02:38 PM

Indeed it has proven to be

Frame Back from Powder coating.

CPP EVERYTHING!

Modified CPP Trailing Arms to accept CPP Rear Sway Bar. I completely understand that this is OVERKILL, but I bought it and was determined to use it.

Outshined · 01-17-2012, 02:44 PM

Merry Christmas TO ME!

Now before ya judge.....everyone else got their presents too.

And Here it is.....waiting patiently.

Outshined · 01-17-2012, 02:51 PM

A little of the Sheet Metal Work..........

The Top being rotten had allowed water to run down the post and completely rot out one side of the dash........ But how about that....my dad had one from a truck he junked years and years ago.......so voila! Solid Dash!

Outshined · 01-17-2012, 02:57 PM

....and here's how it sits today.....

**RenoKeene** · 01-17-2012, 03:21 PM

Top of the line work! Going to be a nice piece.

Outshined · 01-17-2012, 08:11 PM

The Cab as it sits today......... Cab Corners, Rockers, Floor, most of the top and Firewall.....well on its way.

Outshined · 01-17-2012, 08:19 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Outshined · 07-07-2012, 09:48 PM

Here's an update.....been a while, but I've been busy playing music to pay for this little project. I opened a show for Lee Brice, Jake Owen and Eric Church last week........good times!

W.I.P.72 · 07-07-2012, 10:55 PM

very nice

Outshined · 07-19-2012, 07:25 AM

Another Update: After the installation of the March Serpentine Kit and finally the rear end is done......ready for brakes.

My Helper!

CC69Rat · 07-19-2012, 08:40 AM

Incredible job man. Subscribed.

Outshined · 07-30-2012, 09:39 PM

Outshined · 07-30-2012, 09:41 PM

Outshined · 07-30-2012, 09:43 PM

Things are moving along nicely w/ the cab!!

Brakes are Almost done, one more line and it's ready to roll.....and stop.

Chvy2NV · 07-30-2012, 09:56 PM

sweet build!!

Riveted1 · 07-30-2012, 10:53 PM

Looks good! You're making pretty quick work of that thing

VA72C10 · 07-30-2012, 11:21 PM

Looks awesome! You've obviously put a LOT of time and a LOT LOT LOT

of $$$ into this truck! Some top quality products!!!

VA72C10 · 07-30-2012, 11:22 PM

Love the color of the cab and it looks so awesome with that nice clean painted floor!!! Not too many you see like that!

Outshined · 07-31-2012, 07:55 AM

It's been a little less than a year since I started this "little" project. I titled it "It's a family tradition" because my dad has had these trucks since before I was born.......he has pictures of me in a diaper washing the wheels of 67 C10!

My love for these trucks was definitely a learned behavior!

The color is from a 2006 Nissan Titan.........my daily driver.

hopped up · 07-31-2012, 08:15 AM

If the inside looks that good cant wait to see what the outside will look like.
Posted via Mobile Device

Outshined · 07-31-2012, 07:35 PM

I started my love for these trucks Early On!

01-17-2012, 08:32 AM	#1
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	It's A Family Tradition - Project 67 C10 Stepside Here are the humble beginnings of my Project 67......... August 2011 Last edited by Outshined; 01-17-2012 at 08:50 AM.

01-17-2012, 08:52 AM	#2
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: It's A Family Tradition - Project 67 C10 Stepside what are your plans? pics of the bed? __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

01-17-2012, 09:00 AM	#3
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside Hey Chris.....I have a ton of pics Ill upload this afternoon and I'll lay out the plans too! ......late for work, but HAD TO get this started.

01-17-2012, 10:51 AM	#4
cobra_4 Registered User Join Date: Feb 2010 Location: Franklin, NC Posts: 306	Re: It's A Family Tradition - Project 67 C10 Stepside Looks like a project and a half!!!!

01-17-2012, 02:38 PM	#5
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside Indeed it has proven to be Frame Back from Powder coating. CPP EVERYTHING! Modified CPP Trailing Arms to accept CPP Rear Sway Bar. I completely understand that this is OVERKILL, but I bought it and was determined to use it.

01-17-2012, 02:44 PM	#6
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside Merry Christmas TO ME! Now before ya judge.....everyone else got their presents too. And Here it is.....waiting patiently.

01-17-2012, 02:51 PM	#7
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside A little of the Sheet Metal Work.......... The Top being rotten had allowed water to run down the post and completely rot out one side of the dash........ But how about that....my dad had one from a truck he junked years and years ago.......so voila! Solid Dash!

01-17-2012, 02:57 PM	#8
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside ....and here's how it sits today.....

01-17-2012, 03:21 PM	#9
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: It's A Family Tradition - Project 67 C10 Stepside Top of the line work! Going to be a nice piece. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

01-17-2012, 08:11 PM	#10
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside The Cab as it sits today......... Cab Corners, Rockers, Floor, most of the top and Firewall.....well on its way.

01-17-2012, 08:19 PM	#11
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by VA72C10; 07-30-2012 at 11:39 PM.

07-07-2012, 09:48 PM	#12
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside Here's an update.....been a while, but I've been busy playing music to pay for this little project. I opened a show for Lee Brice, Jake Owen and Eric Church last week........good times!

07-07-2012, 10:55 PM	#13
W.I.P.72 Registered User Join Date: Jun 2012 Location: Oklahoma City, OK/ but I'm from Cali Posts: 101	Re: It's A Family Tradition - Project 67 C10 Stepside very nice __________________ OKLAHOMA MEMBER MEET JUNE 15, MIDWEST CITY OK.http://67-72chevytrucks.com/vboard/s...d.php?t=559886 72 C-20 Stepside - Work In Progress

07-19-2012, 07:25 AM	#14
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside Another Update: After the installation of the March Serpentine Kit and finally the rear end is done......ready for brakes. My Helper!

07-19-2012, 08:40 AM	#15
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: It's A Family Tradition - Project 67 C10 Stepside Incredible job man. Subscribed. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

07-30-2012, 09:39 PM	#16
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside

07-30-2012, 09:41 PM	#17
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside

07-30-2012, 09:43 PM	#18
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside Things are moving along nicely w/ the cab!! Brakes are Almost done, one more line and it's ready to roll.....and stop.

07-30-2012, 09:56 PM	#19
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: It's A Family Tradition - Project 67 C10 Stepside sweet build!!

07-30-2012, 10:53 PM	#20
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Re: It's A Family Tradition - Project 67 C10 Stepside Looks good! You're making pretty quick work of that thing __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

07-30-2012, 11:21 PM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: It's A Family Tradition - Project 67 C10 Stepside Looks awesome! You've obviously put a LOT of time and a LOT LOT LOT of $$$ into this truck! Some top quality products!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-30-2012, 11:22 PM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: It's A Family Tradition - Project 67 C10 Stepside Love the color of the cab and it looks so awesome with that nice clean painted floor!!! Not too many you see like that! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-31-2012, 07:55 AM	#23
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside It's been a little less than a year since I started this "little" project. I titled it "It's a family tradition" because my dad has had these trucks since before I was born.......he has pictures of me in a diaper washing the wheels of 67 C10! My love for these trucks was definitely a learned behavior! The color is from a 2006 Nissan Titan.........my daily driver.

07-31-2012, 08:15 AM	#24
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: It's A Family Tradition - Project 67 C10 Stepside If the inside looks that good cant wait to see what the outside will look like. Posted via Mobile Device

07-31-2012, 07:35 PM	#25
Outshined Registered User Join Date: Jan 2012 Location: Falls Mills, VA Posts: 20	Re: It's A Family Tradition - Project 67 C10 Stepside I started my love for these trucks Early On!

Register or Log In To remove these advertisements.