TX Painless 18 circuit wiring harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB72CHEVKT · 01-18-2012, 06:14 PM

Painless 10206 Wiring Harness 67-72 GMC/Chevy Pickup

18-Circuit Harness
Includes: Air Conditioning/Heat, Brake Lights, Coil, Horn, Electric Fan, Emergency Flashers, Gauges/Dash Instruments, Headlights, Radio(ignition hot), Turn Signals, Wipers, Dome Lights, Third Brake Light, Accessory Plug, Power Door Locks, Power Windows, Electric Fuel Pump with constant hot, Radio(ignition hot), Back-up Light/Cruise Control.
67-72 GMC/Chevy Pickup 2/4WD
Use P/N 764-30901 A/C harness when installing this chassis harness on truck with air conditioning.

These retail for $455 thru summitt plus handling charges you are at $470 and I will let this one go for $320 shipped in the lower 48. The first I'll take it gets it.

BB72CHEVKT · 01-19-2012, 11:50 AM

ttt

70BigBlock · 01-19-2012, 12:37 PM

Is $320 your best price?

BB72CHEVKT · 01-19-2012, 12:41 PM

Quote:

Originally Posted by 70BigBlock

Is $320 your best price?

For now yes. I might change my mind but I think it is priced fairly. Here it is at $455 from Summitt http://www.summitracing.com/parts/PRF-10206/ which puts it at $470 shipped. That is a 30% savings.

70BigBlock · 01-19-2012, 12:50 PM

Is this factory fit and is it new in a box?

**CC69Rat** · 01-19-2012, 01:20 PM

Open for trades? Noticed you have some Big Block stuff (your BB72CHEVKT)

I'll trade you these valve covers and $100 for it ..

BB72CHEVKT · 01-19-2012, 01:26 PM

Quote:

Originally Posted by 70BigBlock

Is this factory fit and is it new in a box?

It is new in the box with intsructions. I purchased it from someone who abondoned their project. If you look at the Summitt link this part number is specifically for these trucks.

BB72CHEVKT · 01-19-2012, 01:28 PM

Quote:

Originally Posted by CC69Rat

Open for trades? Noticed you have some Big Block stuff (your BB72CHEVKT)

I'll trade you these valve covers and $100 for it ..

I would trade but it would have to be straight up with no cash.

**CC69Rat** · 01-19-2012, 01:55 PM

So, straight across trade? I'm good with that if you are.

You could paint them black if you wanted .. They'd look sharp on your motor. (Not that the other's dont !!

) I just need the harness for my build, and had considered changing my valve covers. They are the GMPP version, not the Summit ones. .. just FYI. they are like new, just on my motor during the build. The engine was fired for 2-3 min then shut down.

They were originally silver and have been meticulously painted with Chevy Orange VHT.

**CC69Rat** · 01-19-2012, 02:10 PM

For the sake of the potential trade - I am posting the official 'I'll take it' pending the trade agreement.

BB72CHEVKT · 01-19-2012, 02:49 PM

I am good with a straight across trade. I will take it all out of the box tonight and take a pic for you to see everything since I bought it second hand and did not have it available for a pic when I posted the ad at work. If you are good with that PM me your address and I will ship it out once you give the ok.

**CC69Rat** · 01-19-2012, 03:21 PM

Sure .. shoot me a picture and we'll call it done as long as everything's still in the box, etc. etc. Sounds like it is. I'll take care of the shipping from my end, we can just do an even swap .. Cool?

BB72CHEVKT · 01-19-2012, 04:44 PM

Quote:

Originally Posted by CC69Rat

Sure .. shoot me a picture and we'll call it done as long as everything's still in the box, etc. etc. Sounds like it is. I'll take care of the shipping from my end, we can just do an even swap .. Cool?

Sounds great. I just did the same thing with another member on an am/fm.

BB72CHEVKT · 01-19-2012, 08:24 PM

Quote:

Originally Posted by CC69Rat

Sure .. shoot me a picture and we'll call it done as long as everything's still in the box, etc. etc. Sounds like it is. I'll take care of the shipping from my end, we can just do an even swap .. Cool?

Here are the pics. Please give me your zip code so I can see what it is going to cost me to get this to you. This thing is very heavy and appears to be an extensive and well made set up.

**CC69Rat** · 01-19-2012, 09:03 PM

I'll take it, and I'll pay the shipping both ways, that ok?

My zip is 37379. Let me know how much it will cost, I'll send it to you via Paypal with my address and I'll need yours to ship the valve covers. I'm away from my pc at the moment I'll PM shortly.

Thanks.
Posted via Mobile Device

BB72CHEVKT · 01-19-2012, 10:41 PM

Do you have a part number on the valve covers? I was taking quick looks at the site while at work and did not take a good look earlier today. I thought these were the kind that were $400+ in price. What is the finish? I was not looking for a trade and want to make sure I did not jump the gun accepting your offer.

**CC69Rat** · 01-19-2012, 11:16 PM

http://www.summitracing.com/parts/NAL-12371244/

These were originally the silver ones. They sell for $335 on Summit right now. These are the GMPP valve covers not the ones sold as copies. (the letters are different sizes on the copies) They offer these, then a satin black and satin Chevy Orange powder coat. They are $375 on Summit.

Mine were silver and seemed to be getting a few finger prints on them. Nothing major, they're brand new. I just couldn't keep them clean. I got my big block back from the machine shop after the engine had the rear main installed backwards (PO) and we had to do some machine work. The valve covers were never ran / driven.

When I got the engine back we painted it and the valve covers to match with VHT (High Temp) Chevy Orange. They were cleaned with PPG wax and grease remover and the letters taped off carefully before spraying. The VHT lays out very nice and they still have the natural texture to them.

Up to you on the trade. Let me know. I'm ok either way and have offered to pay shipping on both directions.
Thanks.

BB72CHEVKT · 01-19-2012, 11:48 PM

Sorry for the confusion. Yes I accept your deal and will get a price on shipping tomorrow.
Thanks,
KT

HeavyMetalChevy · 01-20-2012, 03:33 AM

way to work it buddies!!!

**CC69Rat** · 01-20-2012, 09:43 AM

I originally bought these valve covers to just build a 'shop truck' with the new GMPP look to my engine. The more shiney stuff I buy for it, it's starting to take on more and more Billet, I'm just changing over to the Billet Specialties covers, the ones with the old style 'Chevrolet' script on them. Justin has them on his black Cheyenne.

Nothing at all wrong with them, just changing the look of my motor.

LEX · 01-20-2012, 10:30 AM

Nice trade on both ends.

BB72CHEVKT · 01-23-2012, 05:29 PM

Your harness is on the way!

**CC69Rat** · 01-23-2012, 05:39 PM

Got it, I'll send the shipping back to you as discussed in the box for the valve covers, save and secured. Thanks again.

01-18-2012, 06:14 PM	#1
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Painless 18 circuit wiring harness Painless 10206 Wiring Harness 67-72 GMC/Chevy Pickup 18-Circuit Harness Includes: Air Conditioning/Heat, Brake Lights, Coil, Horn, Electric Fan, Emergency Flashers, Gauges/Dash Instruments, Headlights, Radio(ignition hot), Turn Signals, Wipers, Dome Lights, Third Brake Light, Accessory Plug, Power Door Locks, Power Windows, Electric Fuel Pump with constant hot, Radio(ignition hot), Back-up Light/Cruise Control. 67-72 GMC/Chevy Pickup 2/4WD Use P/N 764-30901 A/C harness when installing this chassis harness on truck with air conditioning. These retail for $455 thru summitt plus handling charges you are at $470 and I will let this one go for $320 shipped in the lower 48. The first I'll take it gets it. Attached Images __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 01-19-2012 at 01:32 PM.

01-19-2012, 11:50 AM	#2
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Painless 18 circuit wiring harness ttt __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-19-2012, 12:37 PM	#3
70BigBlock Registered User Join Date: Jan 2012 Location: Laredo,Texas Posts: 57	Re: Painless 18 circuit wiring harness Is $320 your best price?

01-19-2012, 12:50 PM	#5
70BigBlock Registered User Join Date: Jan 2012 Location: Laredo,Texas Posts: 57	Re: Painless 18 circuit wiring harness Is this factory fit and is it new in a box?

01-19-2012, 01:20 PM	#6
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness Open for trades? Noticed you have some Big Block stuff (your BB72CHEVKT) I'll trade you these valve covers and $100 for it .. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-19-2012, 01:55 PM	#9
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness So, straight across trade? I'm good with that if you are. You could paint them black if you wanted .. They'd look sharp on your motor. (Not that the other's dont !! ) I just need the harness for my build, and had considered changing my valve covers. They are the GMPP version, not the Summit ones. .. just FYI. they are like new, just on my motor during the build. The engine was fired for 2-3 min then shut down. They were originally silver and have been meticulously painted with Chevy Orange VHT. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-19-2012, 02:10 PM	#10
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness For the sake of the potential trade - I am posting the official 'I'll take it' pending the trade agreement. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-19-2012, 02:49 PM	#11
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Painless 18 circuit wiring harness I am good with a straight across trade. I will take it all out of the box tonight and take a pic for you to see everything since I bought it second hand and did not have it available for a pic when I posted the ad at work. If you are good with that PM me your address and I will ship it out once you give the ok. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-19-2012, 03:21 PM	#12
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness Sure .. shoot me a picture and we'll call it done as long as everything's still in the box, etc. etc. Sounds like it is. I'll take care of the shipping from my end, we can just do an even swap .. Cool? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) Last edited by CC69Rat; 01-19-2012 at 03:41 PM.

01-19-2012, 09:03 PM	#15
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness I'll take it, and I'll pay the shipping both ways, that ok? My zip is 37379. Let me know how much it will cost, I'll send it to you via Paypal with my address and I'll need yours to ship the valve covers. I'm away from my pc at the moment I'll PM shortly. Thanks. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-19-2012, 10:41 PM	#16
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Painless 18 circuit wiring harness Do you have a part number on the valve covers? I was taking quick looks at the site while at work and did not take a good look earlier today. I thought these were the kind that were $400+ in price. What is the finish? I was not looking for a trade and want to make sure I did not jump the gun accepting your offer. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 01-19-2012 at 10:49 PM. Reason: add last sentence

01-19-2012, 11:16 PM	#17
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness http://www.summitracing.com/parts/NAL-12371244/ These were originally the silver ones. They sell for $335 on Summit right now. These are the GMPP valve covers not the ones sold as copies. (the letters are different sizes on the copies) They offer these, then a satin black and satin Chevy Orange powder coat. They are $375 on Summit. Mine were silver and seemed to be getting a few finger prints on them. Nothing major, they're brand new. I just couldn't keep them clean. I got my big block back from the machine shop after the engine had the rear main installed backwards (PO) and we had to do some machine work. The valve covers were never ran / driven. When I got the engine back we painted it and the valve covers to match with VHT (High Temp) Chevy Orange. They were cleaned with PPG wax and grease remover and the letters taped off carefully before spraying. The VHT lays out very nice and they still have the natural texture to them. Up to you on the trade. Let me know. I'm ok either way and have offered to pay shipping on both directions. Thanks. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-19-2012, 11:48 PM	#18
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Painless 18 circuit wiring harness Sorry for the confusion. Yes I accept your deal and will get a price on shipping tomorrow. Thanks, KT __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-20-2012, 03:33 AM	#19
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Painless 18 circuit wiring harness way to work it buddies!!! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

01-20-2012, 09:43 AM	#20
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness I originally bought these valve covers to just build a 'shop truck' with the new GMPP look to my engine. The more shiney stuff I buy for it, it's starting to take on more and more Billet, I'm just changing over to the Billet Specialties covers, the ones with the old style 'Chevrolet' script on them. Justin has them on his black Cheyenne. Nothing at all wrong with them, just changing the look of my motor. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

01-20-2012, 10:30 AM	#21
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: Painless 18 circuit wiring harness Nice trade on both ends.

01-23-2012, 05:29 PM	#22
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Painless 18 circuit wiring harness Your harness is on the way! __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-23-2012, 05:39 PM	#23
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Painless 18 circuit wiring harness Got it, I'll send the shipping back to you as discussed in the box for the valve covers, save and secured. Thanks again. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

Register or Log In To remove these advertisements.