60'ish C60 in junkyard - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sigshooter · 01-18-2012, 10:49 PM

This came in today, I think it is a 60 because it has cables for the lower inside vents. Is the anything I should pull off this before it gets crushed? the doors are rusty in the lower corners as usual, no chrome dash knobs... does have a 4 lever heat defrost control panel.

anyways, any demand for these type grilles? did the 2 tons have anything desierable?

hewlett2002000 · 01-19-2012, 12:22 AM

I sure would like to have that grille, or one like it. nice find.
John

porter90 · 01-19-2012, 12:36 AM

i actually found one of these in a junk yard here too...is that grill a c60 thing only? an im pretty sure that is a c60 because the one here looks exactly like it an still has the badges on it

**Captainfab** · 01-19-2012, 03:02 AM

I would definitely pull the grill, and the complete heater assembly if you can. Does the gauge panel have a tach or vacuum gauge? What engine does it have? Power steering? Does it happen to have the rare independent front suspension?

duallyjams · 01-19-2012, 08:51 AM

The hood looks good.

Rich 5150 69 · 01-19-2012, 09:16 AM

Wiper arm assemblys and motor/switch if they are original..window and door latch assemblys too for resale

sigshooter · 01-19-2012, 09:26 AM

Quote:

Originally Posted by Captainfab

I would definitely pull the grill, and the complete heater assembly if you can. Does the gauge panel have a tach or vacuum gauge? What engine does it have? Power steering? Does it happen to have the rare independent front suspension?

No tach or vac gauge, has a newer looking v8 no power anything and I will have to look at the front suspension

1963c-10 · 01-19-2012, 09:37 AM

The cab lights are starting to get harder to find...some one will probably want them.

awbrown · 01-19-2012, 09:59 AM

If the cab is solid then it is a great find !! My cab on my blue truck is from a C60 ...

Narxoleptic Customs · 01-19-2012, 12:07 PM

I wish I had the $$ to throw at u for the grill. I'd come get it today. Keep the grill, cab lights, handles and steering wheel
Posted via Mobile Device

**aerotruk63** · 01-19-2012, 01:14 PM

jonzcustomshop had been looking for the front tips of the medium duty fenders for his project. I went to look for some I had, but to no avail.

sigshooter · 01-19-2012, 09:54 PM

Quote:

Originally Posted by sigshooter

No tach or vac gauge, has a newer looking v8 no power anything and I will have to look at the front suspension

It does have independent front suspension, I will take pics tomorrow my phone died today so no camera =-(

awbrown · 01-19-2012, 09:56 PM

looks like a 63 ,but you better see what the vin number says ....

94tx · 01-19-2012, 11:16 PM

I am interested in any parts that are interchangeable with C-10s. Please PM me an email or phone number, I will buy anything that hasn't been spoken for.

**aerotruk63** · 01-20-2012, 04:39 PM

Fenders 60-62, hood 62+. grille 60-61

Hawks · 01-20-2012, 08:30 PM

I would Keep the windshield if it is in good shape. it should fit c10s. i could use it myself.

sigshooter · 01-20-2012, 09:23 PM

Quote:

Originally Posted by sigshooter

It does have independent front suspension, I will take pics tomorrow my phone died today so no camera =-(

here are some more pics

jonzcustomshop · 01-20-2012, 10:48 PM

Here is the piece of the rf fender i am looking for.:
http://67-72chevytrucks.com/vboard/s...d.php?t=458028
post #7 shows the measurements...

the grille is a 61, I would save it.

sigshooter · 01-20-2012, 11:01 PM

Quote:

Originally Posted by jonzcustomshop

Here is the piece of the rf fender i am looking for.:
http://67-72chevytrucks.com/vboard/s...d.php?t=458028
post #7 shows the measurements...

the grille is a 61, I would save it.

I will look the fender over closely for rust and damage and get back to you

01-18-2012, 10:49 PM	#1
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	60'ish C60 in junkyard This came in today, I think it is a 60 because it has cables for the lower inside vents. Is the anything I should pull off this before it gets crushed? the doors are rusty in the lower corners as usual, no chrome dash knobs... does have a 4 lever heat defrost control panel. anyways, any demand for these type grilles? did the 2 tons have anything desierable? Attached Images __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

01-19-2012, 12:22 AM	#2
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: 60'ish C60 in junkyard I sure would like to have that grille, or one like it. nice find. John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

01-19-2012, 12:36 AM	#3
porter90 Registered User Join Date: Mar 2010 Location: lewiston maine Posts: 87	Re: 60'ish C60 in junkyard i actually found one of these in a junk yard here too...is that grill a c60 thing only? an im pretty sure that is a c60 because the one here looks exactly like it an still has the badges on it

01-19-2012, 03:02 AM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 60'ish C60 in junkyard I would definitely pull the grill, and the complete heater assembly if you can. Does the gauge panel have a tach or vacuum gauge? What engine does it have? Power steering? Does it happen to have the rare independent front suspension? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-19-2012, 08:51 AM	#5
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 60'ish C60 in junkyard The hood looks good. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-19-2012, 09:16 AM	#6
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: 60'ish C60 in junkyard Wiper arm assemblys and motor/switch if they are original..window and door latch assemblys too for resale __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

01-19-2012, 09:37 AM	#8
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 60'ish C60 in junkyard The cab lights are starting to get harder to find...some one will probably want them. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

01-19-2012, 09:59 AM	#9
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: 60'ish C60 in junkyard If the cab is solid then it is a great find !! My cab on my blue truck is from a C60 ...

01-19-2012, 12:07 PM	#10
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: 60'ish C60 in junkyard I wish I had the $$ to throw at u for the grill. I'd come get it today. Keep the grill, cab lights, handles and steering wheel Posted via Mobile Device

01-19-2012, 01:14 PM	#11
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60'ish C60 in junkyard jonzcustomshop had been looking for the front tips of the medium duty fenders for his project. I went to look for some I had, but to no avail.

01-19-2012, 09:56 PM	#13
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: 60'ish C60 in junkyard looks like a 63 ,but you better see what the vin number says ....

01-19-2012, 11:16 PM	#14
94tx Registered User Join Date: Nov 2008 Location: Houston, TX Posts: 78	Re: 60'ish C60 in junkyard I am interested in any parts that are interchangeable with C-10s. Please PM me an email or phone number, I will buy anything that hasn't been spoken for.

01-20-2012, 04:39 PM	#15
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60'ish C60 in junkyard Fenders 60-62, hood 62+. grille 60-61

01-20-2012, 08:30 PM	#16
Hawks Registered User Join Date: Dec 2011 Location: Floyd va Posts: 80	Re: 60'ish C60 in junkyard I would Keep the windshield if it is in good shape. it should fit c10s. i could use it myself.

01-20-2012, 10:48 PM	#18
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 60'ish C60 in junkyard Here is the piece of the rf fender i am looking for.: http://67-72chevytrucks.com/vboard/s...d.php?t=458028 post #7 shows the measurements... the grille is a 61, I would save it. __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.