CA Parting 77 Scottsdale 1/2 ton 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 01-19-2012, 01:08 PM

This was a good running truck EDIT THIS TRUCK IS LONG GONE. I will be using the engine for my 83, but everything else is for sale.
clutch/brake pedal assembly...$30 plus shipping
cargo light...$26 shipped SOLD
gas tank mounting brackets with straps...$10 each plus shipping
3.07 axles...$250 pair local
side mirrors, right side has chips...$20 pair plus shipping
woodgrain dash insert...$20 plus shipping if the studs don't break
truck carcass...about 9 cents per pound

KrazyRay · 01-19-2012, 01:16 PM

tough time uploading pics...wild blue internet service

Liddy71 · 01-19-2012, 01:25 PM

inter fender any good and fenders

KrazyRay · 01-19-2012, 01:25 PM

pics

madcow75 · 01-19-2012, 01:58 PM

Interested in cargo light to 14222. What is the condition of the chrome, any pitting? Is it possble to get a small piece of wire to splice into all screws and gasket.

KrazyRay · 01-19-2012, 04:45 PM

Liddy71...They are rusty

madcow75...I will pull in next couple of days and verify condition for you.
Thanks,
Ray

76stepsidechevy · 01-19-2012, 06:43 PM

How about that t case shifter boot?

KrazyRay · 01-19-2012, 08:03 PM

It looks good, but I will pull and check condition. What zip or postal code is it going to? BOOT SOLD
Thanks,
Ray

JRANGER · 01-19-2012, 08:41 PM

will the front inner wheel wells fit a standard 78 c15?

76stepsidechevy · 01-19-2012, 09:04 PM

Quote:

Originally Posted by KrazyRay

It looks good, but I will pull and check condition. What zip or postal code is it going to?
Thanks,
Ray

06096, mostly interested in the plate with the gear indicator but if the boot itself is still good even better.

ozark · 01-19-2012, 09:10 PM

Just curious, what is that in the left corner of the dash where the a/c vent would go if it were a a/c truck?

KrazyRay · 01-19-2012, 09:31 PM

Quote:

Originally Posted by JRANGER

will the front inner wheel wells fit a standard 78 c15?

Yes, but these ones are rusty. I will be parting another truck soon and the inners are probably good.
Thanks,
Ray

KrazyRay · 01-19-2012, 09:32 PM

Quote:

Originally Posted by ozark

Just curious, what is that in the left corner of the dash where the a/c vent would go if it were a a/c truck?

Its an naftermarket wiper delay.

JRANGER · 01-19-2012, 09:41 PM

Quote:

Originally Posted by KrazyRay

Yes, but these ones are rusty. I will be parting another truck soon and the inners are probably good.
Thanks,
Ray

cool..just let me know

75gmc454 · 01-19-2012, 09:49 PM

I see the vr4 weight dist hitch. Does this truck have the original hitch still on it? I need one for my 76 big ten.

54Caddy · 01-19-2012, 09:53 PM

dang ray you are going to drive me broke ahaha. how much for left front wing window assembly??

qksilver · 01-19-2012, 10:49 PM

Curious about the side mounted spare. Any pix, thinking I might be able to use it in my 66 fleetside.
Pm me to remind me, I tend to forget.

Thanks,
Steve

KrazyRay · 01-20-2012, 12:40 AM

75gmc454...It looks to have a Reese receiver hitch, however, there is a rear sway bar that is missing a couple of pieces.
54Caddy...This vent window is junk...maybe the next truck has a good one.
qksilver...Sorry, this bed is not the original bed. The carrier is long gone.

I will start tearing into this tomorrow.
Thanks,
Ray

liftlawssuck · 01-20-2012, 03:12 PM

How much for the heater assembly? The one under the dash holding the heater core. If it has no cracks or anything. Also, if it has the torx head screws holding all the light lenses in. Shipped to 01543. Thanks, Brian.

**old Rusty C10** · 01-20-2012, 05:49 PM

Ray that bed appears to have at least one gas door on it... if they are in real good shape would you sell them and shippped to 08859

KrazyRay · 01-20-2012, 06:34 PM

liftlaw...I will pull soon and check condition. If good, $30 plus shipping. SOLD

Bob...I will take pics of the gas doors soon. SOLD

76stepside...The boot has a couple of rips. Boot, ring, indicator...$10 shipped. SOLD

madcow...I pulled the cargo light, switch, and harness. (it goes to the cab corner where it connects to the cab light harness) The chrome is not heavily pitted, but worn. The gasket to the lens fell apart and the rubber has wear. The lens looks good and it will need a bulb...pics: SOLD

76stepsidechevy · 01-20-2012, 07:35 PM

Boot/ring sounds good for 10 bucks, Just currious does that wiper delay setup work ? I might like to have that if it does.

madcow75 · 01-20-2012, 08:02 PM

Cool I will take it. Where do I make payment. Where does the cargo bed light switch mount to from the factory. Can you send me a picture where it origanally was mounted. I would like to keep my truck looking as much as stock as I can. Dustin

75gmc454 · 01-20-2012, 09:11 PM

Thanks for looking Ray. I really dont know what the factory style hitch even looks like.. Just hoping this truck had one on it.
Im sure that the original chrome rear bumper and brackets are gone too then. That is what happened to my big ten. Someone got rid of all of that stuff and put a reese hitch on it and a step bumper.

liftlawssuck · 01-21-2012, 11:41 AM

sounds good to me. Let me know. Thanks, Brian

01-19-2012, 01:08 PM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Parting 77 Scottsdale 1/2 ton 4x4 This was a good running truck EDIT THIS TRUCK IS LONG GONE. I will be using the engine for my 83, but everything else is for sale. clutch/brake pedal assembly...$30 plus shipping cargo light...$26 shipped SOLD gas tank mounting brackets with straps...$10 each plus shipping 3.07 axles...$250 pair local side mirrors, right side has chips...$20 pair plus shipping woodgrain dash insert...$20 plus shipping if the studs don't break truck carcass...about 9 cents per pound Attached Images Last edited by KrazyRay; 02-20-2012 at 10:29 AM.

01-19-2012, 01:16 PM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 tough time uploading pics...wild blue internet service Attached Images

01-19-2012, 01:25 PM	#3
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: Parting 77 Scottsdale 1/2 ton 4x4 inter fender any good and fenders

01-19-2012, 01:25 PM	#4
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 pics Attached Images

01-19-2012, 01:58 PM	#5
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting 77 Scottsdale 1/2 ton 4x4 Interested in cargo light to 14222. What is the condition of the chrome, any pitting? Is it possble to get a small piece of wire to splice into all screws and gasket.

01-19-2012, 04:45 PM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 Liddy71...They are rusty madcow75...I will pull in next couple of days and verify condition for you. Thanks, Ray

01-19-2012, 06:43 PM	#7
76stepsidechevy Registered User Join Date: Nov 2010 Location: Windsor Locks Posts: 628	Re: Parting 77 Scottsdale 1/2 ton 4x4 How about that t case shifter boot?

01-19-2012, 08:03 PM	#8
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 It looks good, but I will pull and check condition. What zip or postal code is it going to? BOOT SOLD Thanks, Ray Last edited by KrazyRay; 01-29-2012 at 03:09 PM.

01-19-2012, 08:41 PM	#9
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: Parting 77 Scottsdale 1/2 ton 4x4 will the front inner wheel wells fit a standard 78 c15?

01-19-2012, 09:10 PM	#11
ozark Registered User Join Date: Jan 2008 Location: Eureka Springs AR Posts: 179	Re: Parting 77 Scottsdale 1/2 ton 4x4 Just curious, what is that in the left corner of the dash where the a/c vent would go if it were a a/c truck?

01-19-2012, 09:49 PM	#15
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: Parting 77 Scottsdale 1/2 ton 4x4 I see the vr4 weight dist hitch. Does this truck have the original hitch still on it? I need one for my 76 big ten. Last edited by 75gmc454; 01-19-2012 at 10:01 PM.

01-19-2012, 09:53 PM	#16
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: Parting 77 Scottsdale 1/2 ton 4x4 dang ray you are going to drive me broke ahaha. how much for left front wing window assembly?? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-19-2012, 10:49 PM	#17
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Parting 77 Scottsdale 1/2 ton 4x4 Curious about the side mounted spare. Any pix, thinking I might be able to use it in my 66 fleetside. Pm me to remind me, I tend to forget. Thanks, Steve

01-20-2012, 12:40 AM	#18
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 75gmc454...It looks to have a Reese receiver hitch, however, there is a rear sway bar that is missing a couple of pieces. 54Caddy...This vent window is junk...maybe the next truck has a good one. qksilver...Sorry, this bed is not the original bed. The carrier is long gone. I will start tearing into this tomorrow. Thanks, Ray Attached Images

01-20-2012, 03:12 PM	#19
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting 77 Scottsdale 1/2 ton 4x4 How much for the heater assembly? The one under the dash holding the heater core. If it has no cracks or anything. Also, if it has the torx head screws holding all the light lenses in. Shipped to 01543. Thanks, Brian.



Register or Log In To remove these advertisements.

01-20-2012, 05:49 PM	#20
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,345	Re: Parting 77 Scottsdale 1/2 ton 4x4 Ray that bed appears to have at least one gas door on it... if they are in real good shape would you sell them and shippped to 08859 __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-20-2012, 06:34 PM	#21
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: Parting 77 Scottsdale 1/2 ton 4x4 liftlaw...I will pull soon and check condition. If good, $30 plus shipping. SOLD Bob...I will take pics of the gas doors soon. SOLD 76stepside...The boot has a couple of rips. Boot, ring, indicator...$10 shipped. SOLD madcow...I pulled the cargo light, switch, and harness. (it goes to the cab corner where it connects to the cab light harness) The chrome is not heavily pitted, but worn. The gasket to the lens fell apart and the rubber has wear. The lens looks good and it will need a bulb...pics: SOLD Attached Images Last edited by KrazyRay; 01-29-2012 at 03:11 PM.

01-20-2012, 07:35 PM	#22
76stepsidechevy Registered User Join Date: Nov 2010 Location: Windsor Locks Posts: 628	Re: Parting 77 Scottsdale 1/2 ton 4x4 Boot/ring sounds good for 10 bucks, Just currious does that wiper delay setup work ? I might like to have that if it does.

01-20-2012, 08:02 PM	#23
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting 77 Scottsdale 1/2 ton 4x4 Cool I will take it. Where do I make payment. Where does the cargo bed light switch mount to from the factory. Can you send me a picture where it origanally was mounted. I would like to keep my truck looking as much as stock as I can. Dustin

01-20-2012, 09:11 PM	#24
75gmc454 Registered User Join Date: Oct 2006 Location: MS Posts: 479	Re: Parting 77 Scottsdale 1/2 ton 4x4 Thanks for looking Ray. I really dont know what the factory style hitch even looks like.. Just hoping this truck had one on it. Im sure that the original chrome rear bumper and brackets are gone too then. That is what happened to my big ten. Someone got rid of all of that stuff and put a reese hitch on it and a step bumper.

01-21-2012, 11:41 AM	#25
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: Parting 77 Scottsdale 1/2 ton 4x4 sounds good to me. Let me know. Thanks, Brian

Register or Log In To remove these advertisements.