OR Misc Blazer parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigbadchev72 · 01-21-2012, 10:59 PM

I will try to get some pics up tomorrow.

New in the bag weatherstripping for the hardtop to windshield $20 shipped

blazer tailgate strip in good shape, has some slight cut-off wheel marks from cutting off the rusted/stripped screws- sounds worse than it looks $45 shipped

Ridnhi · 01-21-2012, 11:49 PM

Ill get in line for the rear chrome side panel strips pending pics.

teeitup · 01-22-2012, 12:13 AM

2nd in line for rear panel chrome strips

Ridnhi · 01-22-2012, 12:26 AM

Also, did you ever get a chance to get that blazer woodgrain trim set down and look at it. Thought maybe you could send some pics of that too. Thanks.

**lks dcvn** · 01-22-2012, 01:15 AM

I will call dibs on the weatherstripping - depending on which ones they are. Can I get a pic of the seals?

Thx.

bigbadchev72 · 01-22-2012, 01:25 PM

Quote:

Originally Posted by Ridnhi

Also, did you ever get a chance to get that blazer woodgrain trim set down and look at it. Thought maybe you could send some pics of that too. Thanks.

Forgot all about that, I will get them dug out too.

bigbadchev72 · 01-22-2012, 08:47 PM

Quote:

Originally Posted by Ridnhi

Also, did you ever get a chance to get that blazer woodgrain trim set down and look at it. Thought maybe you could send some pics of that too. Thanks.

Here is the Blazer woodgrain trim. It is not as bad as i remember it, there are a couple extra screw holes in some pieces-not noticeable when installed. I remember when I replaced the woodgrain on the tailgate band I couldnt figure out how to re-install the letters, so I gorrilla glued them

They are still holding strong!

They have water spots on them and could probably be scrubbed up with a little elbow grease and some black paint, made to look pretty decent again. This set does have some "character" though.

hows $125 shipped sound?

teeitup · 01-22-2012, 08:53 PM

I'll take the chrome rear panel strips if they get to me, yours are better shape than mine. Thanks Randy

swyfor5 · 01-22-2012, 09:28 PM

I'll get in line for the hard top hold down brackets-pending a couple more pics. Mine are pretty worn out, and want to make sure these are better.

bigbadchev72 · 01-22-2012, 10:34 PM

Quote:

Originally Posted by swyfor5

I'll get in line for the hard top hold down brackets-pending a couple more pics. Mine are pretty worn out, and want to make sure these are better.

What other pics would you like of them?

I think I might have a partial set of the factory screws for the front as well- I threw away the factory ones on the jimmy in favor of some allen socket type screws, the factory phillips are begging to strip out.

swyfor5 · 01-22-2012, 10:49 PM

Sounds good, I'll take what you've got. Brackets, extra screws, etc. PM me payment info and it's on the way. Thank's, Bryan.

**lks dcvn** · 01-23-2012, 12:16 AM

Not the seal I need - thanks for the pic though to confirm. Hopping out of line for it.

Ridnhi · 01-23-2012, 01:40 AM

I'll take the rear chrome strips for $85 shipped and would you take $115 shipped for the woodgrain trim and we could call it $200 shipped for all of it? Thanks Eli
Posted via Mobile Device

swyfor5 · 01-23-2012, 04:48 PM

Paypal sent for the top brackets. PM also sent with address, thank you Sir!

Ridnhi · 01-24-2012, 10:20 AM

Paypal sent for chrome rear strips and woodgrain trim. Thanks, Eli

bigbadchev72 · 02-02-2012, 08:47 PM

This is what is still availible

01-21-2012, 10:59 PM	#1
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Misc Blazer parts I will try to get some pics up tomorrow. New in the bag weatherstripping for the hardtop to windshield $20 shipped blazer tailgate strip in good shape, has some slight cut-off wheel marks from cutting off the rusted/stripped screws- sounds worse than it looks $45 shipped __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels Last edited by bigbadchev72; 02-02-2012 at 08:47 PM.

01-21-2012, 11:49 PM	#2
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Misc Blazer parts Ill get in line for the rear chrome side panel strips pending pics. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

01-22-2012, 12:13 AM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Misc Blazer parts 2nd in line for rear panel chrome strips __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2012, 12:26 AM	#4
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Misc Blazer parts Also, did you ever get a chance to get that blazer woodgrain trim set down and look at it. Thought maybe you could send some pics of that too. Thanks. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

01-22-2012, 01:15 AM	#5
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Misc Blazer parts I will call dibs on the weatherstripping - depending on which ones they are. Can I get a pic of the seals? Thx.

01-22-2012, 08:53 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Misc Blazer parts I'll take the chrome rear panel strips if they get to me, yours are better shape than mine. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-22-2012, 09:28 PM	#9
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Misc Blazer parts I'll get in line for the hard top hold down brackets-pending a couple more pics. Mine are pretty worn out, and want to make sure these are better.

01-22-2012, 10:49 PM	#11
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Misc Blazer parts Sounds good, I'll take what you've got. Brackets, extra screws, etc. PM me payment info and it's on the way. Thank's, Bryan.

01-23-2012, 12:16 AM	#12
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Misc Blazer parts Not the seal I need - thanks for the pic though to confirm. Hopping out of line for it.

01-23-2012, 01:40 AM	#13
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Misc Blazer parts I'll take the rear chrome strips for $85 shipped and would you take $115 shipped for the woodgrain trim and we could call it $200 shipped for all of it? Thanks Eli Posted via Mobile Device __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

01-23-2012, 04:48 PM	#14
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Misc Blazer parts Paypal sent for the top brackets. PM also sent with address, thank you Sir!

01-24-2012, 10:20 AM	#15
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: Misc Blazer parts Paypal sent for chrome rear strips and woodgrain trim. Thanks, Eli __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

02-02-2012, 08:47 PM	#16
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: Misc Blazer parts This is what is still availible __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.