How about dash/guage bezel/guage pics! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmartin1 · 01-23-2012, 02:30 AM

I searched several times and only came up with a 67-72 thread for pics of there gauges/gauge bezel/dash.If i missed it im sorry!

Lets see some pictures of everybodys dashes/gauges/gauge bezels.

custom to stock to whatever.

bigblock73 · 01-23-2012, 06:50 AM

Mine, all Autometer Ultralight

swb85 · 01-23-2012, 09:22 AM

Autometer here too...

stroker87 · 01-23-2012, 10:53 AM

swb85 I mounted mine the same as you but hated not being able to see the top of the speedometer and tach so I angled them up

once I get to the interior part of this project I plan on fiber glassing then in to make it look better

1tonchevy · 01-23-2012, 11:04 AM

Quote:

Originally Posted by stroker87

swb85 I mounted mine the same as you but hated not being able to see the top of the speedometer and tach so I angled them up

once I get to the interior part of this project I plan on fiber glassing then in to make it look better

what did you use as the holders? PCV pipeing?

stroker87 · 01-23-2012, 11:15 AM

Quote:

Originally Posted by 1tonchevy

what did you use as the holders? PCV pipeing?

the smaller gauges you can buy the angle rings autometer makes them and yes did use I use PVC pipe fittings for the larger gauges

1tonchevy · 01-23-2012, 11:18 AM

Quote:

Originally Posted by stroker87

the smaller gauges you can buy the angle rings autometer makes them and yes did use I use PVC pipe fittings for the larger gauges

if you dont mind me asking are the guages exspensive?

stroker87 · 01-23-2012, 11:41 AM

Quote:

Originally Posted by 1tonchevy

if you dont mind me asking are the guages exspensive?

I want to say it was around $550 or so dont remember the total it was a while ago when I done that, for me it was a must I built the engine to street/strip the truck and didnt want to rely on old gauges

just looked up the prices
speedo $135
tach $220

the others are $50 to $70 each but it depends on the gauges you like

blazer2007 · 01-23-2012, 11:50 AM

this by far the best one I,ve ever seen

stroker87 · 01-23-2012, 12:00 PM

Quote:

Originally Posted by blazer2007

this by far the best one I,ve ever seen

I seen that one just some thing about it I really dont like, I've seen that in a truck at a local show it was ok maybe best used for a strip only truck

I personally think the auto meter gauges behind the factory bezel looks the best, I want a custom interior so my bezel's going to get glassed and painted

Jonboy · 01-23-2012, 12:24 PM

Here is mine from my build thread. You can kind of see the factory tach I swapped in behind the steering wheel.

Evil Trailblazer SS · 01-23-2012, 12:26 PM

Posted via Mobile Device

**N2TRUX** · 01-23-2012, 02:20 PM

Quote:

Originally Posted by blazer2007

this by far the best one I,ve ever seen

The lower portion is a little plain, but the recess for the gauges totally rocks.

franky69c10 · 01-23-2012, 02:42 PM

Quote:

Originally Posted by Evil Trailblazer SS

Posted via Mobile Device

What did u use for the lighting
Posted via Mobile Device

JRANGER · 01-23-2012, 03:32 PM

that lighting does look nice

dmartin1 · 01-23-2012, 03:51 PM

excellent! lets keep these coming.great ideas from these

Evil Trailblazer SS · 01-23-2012, 05:35 PM

Quote:

Originally Posted by franky69c10

What did u use for the lighting
Posted via Mobile Device

Quote:

Originally Posted by JRANGER

that lighting does look nice

Here they are compared to the stock incandescent bulbs...

Here is a direct link to them from V-Leds. I purchase a lot of product through them and the quality is far superior to ANYTHING I have tested from eBay or any other cheap-o option. Remember, you do get what you pay for! Also, they do 50% off sales quite often, so if you sign up for their email news letter they will keep you posted. I got my dash cluster LED's for $6.99/pair.

http://www.v-leds.com/Exterior-LED-B...54124-1-2.html

mej005 · 01-23-2012, 06:53 PM

Here's mine. All AutoMeter Procomps

boatpuller · 01-23-2012, 07:47 PM

Quote:

Originally Posted by blazer2007

this by far the best one I,ve ever seen

that ones cool.any idea where he got it?

ringger14 · 01-23-2012, 07:53 PM

Im with boatpuller. That one rocks. Id also like to know where that came from!

74 stepside · 01-23-2012, 08:14 PM

That custom guage panel belongs to 73GMC454. He made it himself. Its in his build thread. I personally think its awesome.

J Knight · 01-23-2012, 08:33 PM

Quote:

Originally Posted by 74 stepside

That custom guage panel belongs to 73GMC454. He made it himself. Its in his build thread. I personally think its awesome.

X2 on the awesomeness!!

ringger14 · 01-23-2012, 11:25 PM

Id pay sooo much money for one of those haha

joe231 · 01-23-2012, 11:40 PM

Quote:

Originally Posted by bigblock73

Mine, all Autometer Ultralight

Jeff,
Where did you get that pocket on the upper right of the bezel? Is that just a standard non-a/c bezel?
Posted via Mobile Device

bigblock73 · 01-24-2012, 12:31 AM

Quote:

Originally Posted by joe231

Jeff,
Where did you get that pocket on the upper right of the bezel? Is that just a standard non-a/c bezel?
Posted via Mobile Device

Yes, 74/74 non AC Bezel

01-23-2012, 02:30 AM	#1
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	How about dash/guage bezel/guage pics! I searched several times and only came up with a 67-72 thread for pics of there gauges/gauge bezel/dash.If i missed it im sorry! Lets see some pictures of everybodys dashes/gauges/gauge bezels. custom to stock to whatever. __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

01-23-2012, 06:50 AM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: How about dash/guage bezel/guage pics! Mine, all Autometer Ultralight Attached Images __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-23-2012, 09:22 AM	#3
swb85 On a budget like Fred Sanford Join Date: Oct 2005 Location: Topeka, KS Posts: 2,031	Re: How about dash/guage bezel/guage pics! Autometer here too... __________________ '85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD

01-23-2012, 10:53 AM	#4
stroker87 Registered User Join Date: Nov 2011 Location: Chicago, IL Posts: 321	Re: How about dash/guage bezel/guage pics! swb85 I mounted mine the same as you but hated not being able to see the top of the speedometer and tach so I angled them up once I get to the interior part of this project I plan on fiber glassing then in to make it look better

01-23-2012, 11:50 AM	#9
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: How about dash/guage bezel/guage pics! this by far the best one I,ve ever seen Attached Images

01-23-2012, 12:24 PM	#11
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: How about dash/guage bezel/guage pics! Here is mine from my build thread. You can kind of see the factory tach I swapped in behind the steering wheel. Attached Images __________________ 1974 Jimmy- 5.3/4L80e/NP241

01-23-2012, 12:26 PM	#12
Evil Trailblazer SS Big Gulps Huh? Whelp... Join Date: Apr 2010 Location: Reno, NV Posts: 410	Re: How about dash/guage bezel/guage pics! Posted via Mobile Device __________________ "The Ghost II" - 1987 V30 CC, 14-BFF (2nd Design Heavy Ribbed HD) SRW Conversion, 454/4L80E/205, 6" Springs, 35" Toyo MT's on 17" Classic II's, Full Audio System, Lot of Other Goodies!

01-23-2012, 03:32 PM	#15
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: How about dash/guage bezel/guage pics! that lighting does look nice __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

01-23-2012, 03:51 PM	#16
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: How about dash/guage bezel/guage pics! excellent! lets keep these coming.great ideas from these __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

01-23-2012, 06:53 PM	#18
mej005 Registered User Join Date: Aug 2010 Location: ruston, la Posts: 97	Re: How about dash/guage bezel/guage pics! Here's mine. All AutoMeter Procomps

01-23-2012, 07:53 PM	#20
ringger14 Registered User Join Date: Jul 2011 Location: Macomb Illinois Posts: 97	Re: How about dash/guage bezel/guage pics! Im with boatpuller. That one rocks. Id also like to know where that came from!

01-23-2012, 08:14 PM	#21
74 stepside Registered User Join Date: Oct 2009 Location: SoCal Posts: 815	Re: How about dash/guage bezel/guage pics! That custom guage panel belongs to 73GMC454. He made it himself. Its in his build thread. I personally think its awesome.

01-23-2012, 11:25 PM	#23
ringger14 Registered User Join Date: Jul 2011 Location: Macomb Illinois Posts: 97	Re: How about dash/guage bezel/guage pics! Id pay sooo much money for one of those haha



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.