WA 67-68 Buddy Buckets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

breeh · 01-30-2012, 01:29 AM

67-68 Buddy Buckets. Driver's seat folds forward but could use seat foam replacement. $400.00 plus shipping. Figure shipping to be between $100-$150. You will pay only actual shipping costs.

Thanks for looking!

angelo_32806 · 01-30-2012, 10:42 AM

Will you sell them without the frame
Lee

breeh · 01-30-2012, 11:08 AM

Sure, for the same price though. Frame would be scrap without the seats.
Posted via Mobile Device

68 IRON · 01-30-2012, 11:16 AM

If you did break them up, I'd be interested in the frame. What would you want for it?

**leddzepp** · 01-30-2012, 11:30 AM

Is that black center console for sale in the background?

68 IRON · 01-30-2012, 11:34 AM

Good eye Zepp!.....dang it!

mahanian · 01-30-2012, 12:51 PM

PM sent

breeh · 01-30-2012, 09:02 PM

angelo 32806 and 68 iron, if you guys want to figure out what each is willing to pay so that I get $400.00 plus shipping then I don't care where each piece ships to.

Leroy-B1 · 01-30-2012, 10:39 PM

Shipping quote to 28714 or asheville nc greyhound....also what about the buckets in background?
Posted via Mobile Device

breeh · 01-30-2012, 11:05 PM

Quote:

Originally Posted by Leroy-B1

Shipping quote to 28714 or asheville nc greyhound....also what about the buckets in background?
Posted via Mobile Device

Shipping quote included in original post...
Posted via Mobile Device

**425HP409** · 01-31-2012, 04:24 PM

if 68 IRON doesn't get the frame, I would be interested also

68 IRON · 01-31-2012, 04:47 PM

Quote:

Originally Posted by breeh

Sure, for the same price though. Frame would be scrap without the seats.
Posted via Mobile Device

Is the frame bent rusted or cracked? You said its probably scrap without seats...just curious about condition. Better pics of the frame would help a lot.

Thanks, John

breeh · 01-31-2012, 09:21 PM

Frame is solid. I just thought that it would not have value alone. I guess I was wrong.

Without taking the seats off, the picture in this post is about all that is visible.

**Classic Bowties** · 01-31-2012, 09:49 PM

Quote:

Originally Posted by breeh

Frame is solid. I just thought that it would not have value alone. I guess I was wrong.

Hi Brent, hope all is going well up your way. As far as the values go on the 67/68 buddys, below is what I have been getting/sticking to for awhile now when a setup gets pieced out. The nicer original setups usually sell themselves fairly quick, and although its a bit more work the rougher sets are worth just as much when parted out. Mel

$200. - 67/68 GM buddy seat frame
$125. - 67/68 center console seat
$150. - 67/68 outer L./R. seats @ $75. ea. min.
$100. - 67/68 LH seat adjuster tracks
$ 40. - 67/68 RH seat mounting brkts x 4
$ 40. - 67/68 center con./seat clamps x 4
$655.00 min. if parted out.

breeh · 01-31-2012, 10:06 PM

Hi Mel, thanks, that is very helpful. Thanks for the education!

breeh · 02-01-2012, 10:30 PM

TTT and then these seats become man cave couches...

**425HP409** · 02-02-2012, 11:41 AM

I will take them.

breeh · 02-10-2012, 07:10 PM

Sold. Thanks 425HP409!

01-30-2012, 01:29 AM	#1
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	67-68 Buddy Buckets 67-68 Buddy Buckets. Driver's seat folds forward but could use seat foam replacement. $400.00 plus shipping. Figure shipping to be between $100-$150. You will pay only actual shipping costs. Thanks for looking! Attached Images __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-30-2012, 10:42 AM	#2
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: 67-68 Buddy Buckets Will you sell them without the frame Lee

01-30-2012, 11:08 AM	#3
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 Buddy Buckets Sure, for the same price though. Frame would be scrap without the seats. Posted via Mobile Device __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-30-2012, 11:16 AM	#4
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 67-68 Buddy Buckets If you did break them up, I'd be interested in the frame. What would you want for it?

01-30-2012, 11:30 AM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: 67-68 Buddy Buckets Is that black center console for sale in the background? __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

01-30-2012, 11:34 AM	#6
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: 67-68 Buddy Buckets Good eye Zepp!.....dang it!

01-30-2012, 12:51 PM	#7
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 67-68 Buddy Buckets PM sent

01-30-2012, 09:02 PM	#8
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 Buddy Buckets angelo 32806 and 68 iron, if you guys want to figure out what each is willing to pay so that I get $400.00 plus shipping then I don't care where each piece ships to. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-30-2012, 10:39 PM	#9
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: 67-68 Buddy Buckets Shipping quote to 28714 or asheville nc greyhound....also what about the buckets in background? Posted via Mobile Device

01-31-2012, 04:24 PM	#11
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: 67-68 Buddy Buckets if 68 IRON doesn't get the frame, I would be interested also __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

01-31-2012, 09:21 PM	#13
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 Buddy Buckets Frame is solid. I just thought that it would not have value alone. I guess I was wrong. Without taking the seats off, the picture in this post is about all that is visible. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-31-2012, 10:06 PM	#15
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 Buddy Buckets Hi Mel, thanks, that is very helpful. Thanks for the education! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

02-01-2012, 10:30 PM	#16
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 Buddy Buckets TTT and then these seats become man cave couches... __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

02-02-2012, 11:41 AM	#17
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: 67-68 Buddy Buckets I will take them. __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

02-10-2012, 07:10 PM	#18
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: 67-68 Buddy Buckets Sold. Thanks 425HP409! __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.