4" angled lower blocks and u bolts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phantom dually · 04-28-2003, 11:35 PM

This is a set of 4" angled lower blocks that are powder coated black. They are aluminum blocks with steel center pin. U bolts have also been powdered to resist rust. $26.00 shipped in the lower 48 only. These will fit all trucks with leafs and possibly others.

phantom dually · 05-03-2003, 02:59 AM

TTT

phantom dually · 05-08-2003, 07:26 AM

ttt

Bobs76 · 05-08-2003, 08:19 AM

Hey phantom, would you want to trade for a crossmember? I was going to make my own lowerin blocks an flip kit, but if I could get those it would make it easier..

phantom dually · 05-08-2003, 06:19 PM

I actually just bought a crossmember from Turners a few weeks ago. The bad thing is I paid about $150 for it. What else can you make up??

Bobs76 · 05-08-2003, 07:38 PM

I can weld almost anything you can think of, What do you need?

Bobs76 · 05-08-2003, 07:40 PM

I forgot to tell you a buddy of mine has a lathe I can use anytime I need.

Bobs76 · 05-08-2003, 08:43 PM

Would you happen to have a pic of thier mount? I would like to see how they make it.

phantom dually · 05-10-2003, 11:01 AM

I will try to get a pic in the nexy day or so and post it. Thanks

phantom dually · 05-13-2003, 04:38 PM

TTT

trukkers69 · 05-14-2003, 08:55 PM

You can use them for lift blocks too can't you? If you can im interested in them.

phantom dually · 05-14-2003, 10:07 PM

Yes I assume that you can!!

04-28-2003, 11:35 PM	#1
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	4" angled lower blocks and u bolts This is a set of 4" angled lower blocks that are powder coated black. They are aluminum blocks with steel center pin. U bolts have also been powdered to resist rust. $26.00 shipped in the lower 48 only. These will fit all trucks with leafs and possibly others. Attached Images __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-03-2003, 02:59 AM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-08-2003, 07:26 AM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	ttt __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-08-2003, 08:19 AM	#4
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Hey phantom, would you want to trade for a crossmember? I was going to make my own lowerin blocks an flip kit, but if I could get those it would make it easier.. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-08-2003, 06:19 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I actually just bought a crossmember from Turners a few weeks ago. The bad thing is I paid about $150 for it. What else can you make up?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-08-2003, 07:38 PM	#6
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I can weld almost anything you can think of, What do you need? __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-08-2003, 07:40 PM	#7
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	I forgot to tell you a buddy of mine has a lathe I can use anytime I need. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-08-2003, 08:43 PM	#8
Bobs76 Registered User Join Date: Apr 2003 Location: Granbury Texas Posts: 141	Would you happen to have a pic of thier mount? I would like to see how they make it. __________________ If it aint got t*ts or wheels I am not interested!!!!!!

05-10-2003, 11:01 AM	#9
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I will try to get a pic in the nexy day or so and post it. Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-13-2003, 04:38 PM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	TTT __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

05-14-2003, 08:55 PM	#11
trukkers69 Registered User Join Date: Jan 2003 Location: Sebastopol Miss. Posts: 169	You can use them for lift blocks too can't you? If you can im interested in them. __________________ EXPERIMENTAL STAGES OF SANITY _____________________________ Run whatcha brung, and hope you brung enuff

05-14-2003, 10:07 PM	#12
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Yes I assume that you can!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.