WA WTB: Non AC clean cabs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vintage Windmills · 02-04-2012, 07:05 PM

Looking to buy 1 or two cabs, Non AC. Must be clean except for needing rockers is ok. I will have truck and trailer going from MN to Seattle between April 14th and 19th. Thanks in advance,

Jud

Vintage Windmills · 02-07-2012, 12:31 AM

ttt. I've bought a bed and seat near Seattle for my K20 project and my friend bought a Longhorn super cheyenne 30 in Spokane so we will be going between those areas for sure.

KrazyRay · 02-07-2012, 12:36 AM

I have 1 cab and I'm looking for more to justify a trip to WA.

Maxxd07 · 02-07-2012, 12:37 AM

I have one along your trip route if you are going on I-94, but its probably rustier than you would want. It needs rockers cab corners and some floor repair. I will be robbing the small center hump and doors from it, and gutting it except for glass and seat so if you want it its yours.

teeitup · 02-07-2012, 12:48 AM

Jud, I still have this one ton red cab with cab lights here

KrazyRay · 02-08-2012, 07:47 PM

My 68 GMC cab is pretty clean. It needs rust repair at the kick panel,floor, rocker area on both sides. Looks to be a fast and easy fix. The rest of the cab is very solid.

Vintage Windmills · 02-08-2012, 10:03 PM

Quote:

Originally Posted by KrazyRay

My 68 GMC cab is pretty clean. It needs rust repair at the kick panel,floor, rocker area on both sides. Looks to be a fast and easy fix. The rest of the cab is very solid.

I think even that is more work than I'm looking for, do you have any others? Do you think I could fit two cabs in the back of a longhorn?

Quote:

Originally Posted by teeitup

Jud, I still have this one ton red cab with cab lights here

Randy, i'm surprised you still have that! that isn't a bad cab but the lights wouldn't be correct on my 1/2 ton or stocker 3/4.

Quote:

Originally Posted by Maxxd07

I have one along your trip route if you are going on I-94, but its probably rustier than you would want. It needs rockers cab corners and some floor repair. I will be robbing the small center hump and doors from it, and gutting it except for glass and seat so if you want it its yours.

Sounds a little rough but how far off 94 are you?

scotts72heavyhalf · 02-08-2012, 11:44 PM

I have a complete 69C10 cab, doors and front fenders , typical rust but nothing serious, comes with the new inner and outer rockers, gutted. I`ll take $600.00 for the lot. Pictures on my build site our new 69C10 project, wont be ready to pick-up until the end of next week.

Maxxd07 · 02-09-2012, 12:29 AM

Quote:

Originally Posted by Vintage Windmills

Sounds a little rough but how far off 94 are you?

About 30 miles or so. North of Dickinson about 23 miles on hwy 22 and then off the hwy about 7 miles.
Posted via Mobile Device

Vintage Windmills · 03-25-2012, 12:02 PM

ttt still looking. Will be in Washington state, Idaho, Montana April 14th - 18th and still could use a cab to bring back and also clean 67 and 72 doors

Livrat · 03-25-2012, 12:22 PM

Jud, I have an aquaintance that has a real nice 69 GMC 3/4 ton (was a BB truck) complete rolling body/chassis with title (was purchased to use for a now abandoned 4X4 project) unfortunately he wants to sell everything as a package, a 69 4X4 frame and title, bed and nose off another 69/70 GMC several doors, and lots of misc.. all for $1000

skrenly · 03-25-2012, 12:27 PM

Quote:

Originally Posted by Vintage Windmills

ttt. I've bought a bed and seat near Seattle for my K20 project and my friend bought a Longhorn super cheyenne 30 in Spokane so we will be going between those areas for sure.

Lets make a deal. This is a Sierra / Cheyenne cab with Headliner, cargo light, etc. Comes with title and protecto plate.
Steve
http://67-72chevytrucks.com/vboard/s...d.php?t=516015

Vintage Windmills · 04-02-2012, 10:30 PM

still looking

Jerry Jones · 04-02-2012, 11:23 PM

No chance of making it down to CA?

Vintage Windmills · 04-03-2012, 12:14 AM

Nope, even Oregon is probably too far unless we have extra time

Jerry Jones · 04-03-2012, 12:56 AM

Oh well, good luck to you and have a safe trip!

otsenre · 04-03-2012, 08:18 AM

I have a 72 but its AC cab

skrenly · 04-03-2012, 09:57 AM

Quote:

Originally Posted by Vintage Windmills

Nope, even Oregon is probably too far unless we have extra time

Let me know if you consider heading to Oregon. What are your travel dates again?

Vintage Windmills · 04-03-2012, 12:43 PM

Quote:

Originally Posted by skrenly

Let me know if you consider heading to Oregon. What are your travel dates again?

I would love to have that cab but just can't commit at this point due to timing and distance from seattle. If we have time to grab it would probably be Tuesday the 17th, night before or morning of the 18th. PM me your availability and contact info so I can get in touch when we are out there if it will work out. Thanks,

Jud

02-04-2012, 07:05 PM	#1
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	WTB: Non AC clean cabs Looking to buy 1 or two cabs, Non AC. Must be clean except for needing rockers is ok. I will have truck and trailer going from MN to Seattle between April 14th and 19th. Thanks in advance, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6 Last edited by Vintage Windmills; 03-25-2012 at 12:08 PM.

02-07-2012, 12:31 AM	#2
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: Non AC clean cabs ttt. I've bought a bed and seat near Seattle for my K20 project and my friend bought a Longhorn super cheyenne 30 in Spokane so we will be going between those areas for sure. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-07-2012, 12:36 AM	#3
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB: Non AC clean cabs I have 1 cab and I'm looking for more to justify a trip to WA.

02-07-2012, 12:37 AM	#4
Maxxd07 Registered User Join Date: Sep 2010 Location: ND Posts: 520	Re: WTB: Non AC clean cabs I have one along your trip route if you are going on I-94, but its probably rustier than you would want. It needs rockers cab corners and some floor repair. I will be robbing the small center hump and doors from it, and gutting it except for glass and seat so if you want it its yours. __________________ Name: Les ---------------------- Couple 80s Couple 70s One 68

02-07-2012, 12:48 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: WTB: Non AC clean cabs Jud, I still have this one ton red cab with cab lights here __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-08-2012, 07:47 PM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB: Non AC clean cabs My 68 GMC cab is pretty clean. It needs rust repair at the kick panel,floor, rocker area on both sides. Looks to be a fast and easy fix. The rest of the cab is very solid. Attached Images

02-08-2012, 11:44 PM	#8
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: WTB: Non AC clean cabs I have a complete 69C10 cab, doors and front fenders , typical rust but nothing serious, comes with the new inner and outer rockers, gutted. I`ll take $600.00 for the lot. Pictures on my build site our new 69C10 project, wont be ready to pick-up until the end of next week. __________________ Scotts72C10

03-25-2012, 12:02 PM	#10
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: Non AC clean cabs ttt still looking. Will be in Washington state, Idaho, Montana April 14th - 18th and still could use a cab to bring back and also clean 67 and 72 doors __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-25-2012, 12:22 PM	#11
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: WTB: Non AC clean cabs Jud, I have an aquaintance that has a real nice 69 GMC 3/4 ton (was a BB truck) complete rolling body/chassis with title (was purchased to use for a now abandoned 4X4 project) unfortunately he wants to sell everything as a package, a 69 4X4 frame and title, bed and nose off another 69/70 GMC several doors, and lots of misc.. all for $1000

04-02-2012, 10:30 PM	#13
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: Non AC clean cabs still looking __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-02-2012, 11:23 PM	#14
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: WTB: Non AC clean cabs No chance of making it down to CA? __________________ RIP El Jay! Love you brother!

04-03-2012, 12:14 AM	#15
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: Non AC clean cabs Nope, even Oregon is probably too far unless we have extra time __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

04-03-2012, 12:56 AM	#16
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: WTB: Non AC clean cabs Oh well, good luck to you and have a safe trip! __________________ RIP El Jay! Love you brother!

04-03-2012, 08:18 AM	#17
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: WTB: Non AC clean cabs I have a 72 but its AC cab



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.