Who has smoothed their ramhorns? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BB72CHEVKT · 02-10-2012, 05:09 PM

Post up some pics. Was it worth the effort?

Andy4639 · 02-11-2012, 09:44 AM

I would like to hear of this to! I have a set I was planning to do just haven't gotten there yet!

TobyArnot · 02-11-2012, 10:30 AM

I did some smoothing of the set I bought. I didn't spend more than a few hours on mine, just wanted to "clean 'em up". I then heated 'em in my powder-coat oven to 300* to get all the oil out. Wiped down with acetone and foam-brush painted with POR-15 exhaust paint. Baked again at 200* and slow cooled. I tend to get anal, so I called that it. (SEE PICS).
Was it worth it? Probably not, but it was cool and a good exercise. On thing, all that cast iron grinding dust totally permeated the t-shirt and jeans I was wearing and they proceeded to "rust" when washed (threw 'em away), so watch where all that dust goes. Also, wear breathing protection. I coughed up iron dust for a week. Probably wasn't the smartest thing I'd ever done.

**jocko** · 02-11-2012, 12:23 PM

good safety tips, thanks. I've wondered about doing this also. Yours look great - have you installed them yet and, if so, have they held up very well? Not many cast iron parts and coatings seem to remain fresh, but your process seems very sound, so just curious.

BB72CHEVKT · 02-13-2012, 11:11 AM

Those look nice Toby. Anybody got pics of theirs installed?

**passthebuck** · 02-13-2012, 11:28 AM

Speedway really smoothed their ramhorns:

http://www.speedwaymotors.com/Tru-Ra...DisplayId=5425

BB72CHEVKT · 02-13-2012, 11:34 AM

Those are sweet but not an option for my budget.

TobyArnot · 02-13-2012, 08:12 PM

Quote:

Originally Posted by passthebuck

Speedway really smoothed their ramhorns:

http://www.speedwaymotors.com/Tru-Ra...DisplayId=5425

I looked at those , but all the exhaust people I talked to said the straight down exits would be a tough fit. FYI Besides , I only paid $40 bucks for both manifolds and a usable crossover pipe that got me to the muffler shop!

BB72CHEVKT · 02-14-2012, 06:00 PM

Quote:

Originally Posted by TobyArnot

I looked at those , but all the exhaust people I talked to said the straight down exits would be a tough fit. FYI Besides , I only paid $40 bucks for both manifolds and a usable crossover pipe that got me to the muffler shop!

n2billet is running them and they are sweet looking installed

n2billet · 02-15-2012, 01:49 PM

Quote:

Originally Posted by BB72CHEVKT

n2billet is running them and they are sweet looking installed

They are very nice!

I have smooth ram horns in the past and it's a ton of work and it's nasty! I started smoothing a set for my 67 but after getting one done I bought the stainless ones from Speedway. I will get some pictures of the smooth ram horn for you.

BB72CHEVKT · 02-16-2012, 11:20 AM

Quote:

Originally Posted by n2billet

They are very nice!

I have smooth ram horns in the past and it's a ton of work and it's nasty! I started smoothing a set for my 67 but after getting one done I bought the stainless ones from Speedway. I will get some pictures of the smooth ram horn for you.

Would love to see pics? Did you use a band saw or just a grinder?

02-10-2012, 05:09 PM	#1
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Who has smoothed their ramhorns? Post up some pics. Was it worth the effort? __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

02-11-2012, 09:44 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Who has smoothed their ramhorns? I would like to hear of this to! I have a set I was planning to do just haven't gotten there yet! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-11-2012, 10:30 AM	#3
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Re: Who has smoothed their ramhorns? I did some smoothing of the set I bought. I didn't spend more than a few hours on mine, just wanted to "clean 'em up". I then heated 'em in my powder-coat oven to 300* to get all the oil out. Wiped down with acetone and foam-brush painted with POR-15 exhaust paint. Baked again at 200* and slow cooled. I tend to get anal, so I called that it. (SEE PICS). Was it worth it? Probably not, but it was cool and a good exercise. On thing, all that cast iron grinding dust totally permeated the t-shirt and jeans I was wearing and they proceeded to "rust" when washed (threw 'em away), so watch where all that dust goes. Also, wear breathing protection. I coughed up iron dust for a week. Probably wasn't the smartest thing I'd ever done. Attached Images __________________ MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee)

02-11-2012, 12:23 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Who has smoothed their ramhorns? good safety tips, thanks. I've wondered about doing this also. Yours look great - have you installed them yet and, if so, have they held up very well? Not many cast iron parts and coatings seem to remain fresh, but your process seems very sound, so just curious.

02-13-2012, 11:11 AM	#5
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Who has smoothed their ramhorns? Those look nice Toby. Anybody got pics of theirs installed? __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

02-13-2012, 11:28 AM	#6
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Who has smoothed their ramhorns? Speedway really smoothed their ramhorns: http://www.speedwaymotors.com/Tru-Ra...DisplayId=5425 __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

02-13-2012, 11:34 AM	#7
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Who has smoothed their ramhorns? Those are sweet but not an option for my budget. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.