GA Wtb upper end step fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chopnchaneled · 02-11-2012, 11:31 AM

Need a real nice 68 up pass side step fender, closer to the atlanta area the better.
Please no Rust thur or heavy damage, got one of them!
Thanks

chopnchaneled · 02-13-2012, 10:16 AM

Anybody got one they want to sell, even outside the atlanta area that would ship?

CC69Rat · 02-13-2012, 10:32 AM

I searched all over this area for a good Pass side. I had to ship one in from Seattle WA. It has a good lip on it both the mounting side and the outer edge. I just had to fix about a 2" square place on the front near the step area but it's the best one I could find.

I'll keep my eyes open for you man. .. but I had a tough time finding a good one too.

chopnchaneled · 02-13-2012, 11:20 AM

Thanks would appreciate it.

I had just found this bed a short while back and it is rust free, with the exception of of the bottom of the beds pass side fender at the step, normaly this wouldn't be a problem,but the PO had cut the side marker light area out to try and make it look like a 67 so between the both of them i'm on a quest.

CC69Rat · 02-13-2012, 12:05 PM

So you need a 67 ? .. or 68+ ?

chopnchaneled · 02-13-2012, 01:43 PM

68 +

chopnchaneled · 02-17-2012, 10:28 AM

Friday Bump,,,,, Still Looking

*mrdana60* · 02-17-2012, 10:42 AM

do you need just the fender or step ? i have two fenders and some steps.

chopnchaneled · 02-27-2012, 10:45 AM

Still Looking for a "REAL Nice" upper end pass side step fender. 68+

chopnchaneled · 03-05-2012, 10:00 AM

once more ttt

chopnchaneled · 03-05-2012, 06:29 PM

Found one !!!!!! YA HOO !!!!

02-11-2012, 11:31 AM	#1
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Wtb upper end step fender Need a real nice 68 up pass side step fender, closer to the atlanta area the better. Please no Rust thur or heavy damage, got one of them! Thanks __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do. Last edited by chopnchaneled; 03-05-2012 at 01:22 PM.

02-13-2012, 10:16 AM	#2
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Wtb upper end step fender Anybody got one they want to sell, even outside the atlanta area that would ship? __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

02-13-2012, 10:32 AM	#3
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: Wtb upper end step fender I searched all over this area for a good Pass side. I had to ship one in from Seattle WA. It has a good lip on it both the mounting side and the outer edge. I just had to fix about a 2" square place on the front near the step area but it's the best one I could find. I'll keep my eyes open for you man. .. but I had a tough time finding a good one too. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-13-2012, 11:20 AM	#4
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Wtb upper end step fender Thanks would appreciate it. I had just found this bed a short while back and it is rust free, with the exception of of the bottom of the beds pass side fender at the step, normaly this wouldn't be a problem,but the PO had cut the side marker light area out to try and make it look like a 67 so between the both of them i'm on a quest. __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

02-13-2012, 12:05 PM	#5
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: Wtb upper end step fender So you need a 67 ? .. or 68+ ? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-13-2012, 01:43 PM	#6
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Wtb upper end step fender 68 + __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

02-17-2012, 10:28 AM	#7
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Wtb upper end step fender Friday Bump,,,,, Still Looking __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

02-17-2012, 10:42 AM	#8
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,472	Re: Wtb upper end step fender do you need just the fender or step ? i have two fenders and some steps.

02-27-2012, 10:45 AM	#9
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Wtb upper end step fender Still Looking for a "REAL Nice" upper end pass side step fender. 68+ __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

03-05-2012, 10:00 AM	#10
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Wtb upper end step fender once more ttt __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.

03-05-2012, 06:29 PM	#11
chopnchaneled Registered User Join Date: Dec 2009 Location: Atlanta, Ga. Posts: 1,050	Re: Wtb upper end step fender Found one !!!!!! YA HOO !!!! __________________ I don't think we get smarter as we get older. We just run out of Stupid things to do.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.