To those wanting late model SEATS: - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Piston* · 04-30-2003, 04:26 PM

If you are looking for a late model seat, please post here so I can keep track of them. I have a source that is nation wide that supplies "used" seats in various condition. Most will be in "like new" condition meaning no defects/tears/stains. It really depends on what you would like to spend. They range anywhere from 100.00 to 350.00. Some with console some without, some with electric controls some without.

Post what you want a price on and I'll check for you. Whatever they cost me is what I'll charge.
In most cases there is NO SHIPPING! But I was told that they would drop ship them if the yard is close enough to you. All I can do is try on the shipping so post your zip and I'll check. Shipping will run 100.00 per seat though.
Also, I won't have pics until they are ordered, if you dont like the seat after I take the pic, I can send it back with no problem.
Only post if your ready to buy now though, I can't send a bunch of the seats back without them getting mad.

Colors are:
Tan / Red / Blue / Grey

jays68yak · 04-30-2003, 05:42 PM

ok Ill give it a shot

95-99 suburban/tahoe middle seat
grey, cloth
zip 94568

If nothing close to me then dont bother, dont want to deal with shipping.

PHOENIX · 04-30-2003, 06:14 PM

2000 Tahoe or similar seats.
All three (both ends and center w/ console)
Grey cloth w/ seat belts built in.

**smitty62** · 04-30-2003, 06:24 PM

Would a GM pickup or Tahoe grey leather bench be available??

69sixpackbee · 04-30-2003, 06:24 PM

Late model Silverado or Sub 60/40 cloth bench. Prefer gray but will dye a different one if need be.
I am in the Pomona/Ontario Cal. area. (91767-91762)

Huck · 04-30-2003, 08:33 PM

Would be interested in a 60/40 bench with flop down arm rest - console if such a thing exists. Blue. No ship but could pick up within reasonable distance. Zip is 40003

LT 72 Jimmy · 05-01-2003, 01:07 AM

Iwould like to get a price on a 01-03 tahoe seat. I have a jimmy and want to have the built-in shoulder belt. I would prefer blue.

thanks

LT

ozarkhippie · 05-01-2003, 08:10 AM

looking for a tan seat for my 89 gmc. I would like one with a fold down console-arm rest. But anything will beat what I have got in it now.

Fred T · 05-01-2003, 10:09 AM

For those of you wondering about installing the late model seats, I just finished with mine. Bought a 60/40 bench from Garrett that was out of a 98 Tahoe, which is actually two separate seats. I was able to use the holes on the front corners, drilling them out to 3/8". Had to make a bracket for the right front corner of the driver's section, due to differences in the hump. A piece of 1-1/4" angle will bolt to the bracket and sits on the raised section that runs from side to side. The hole in the bracket ends up actually forward of the other end, so I bolted angles to this that attached to the raised section and to the floor in front, which is about 1" lower. I then made 3/8" spacers for the rear attachments, with the exception of the right end of the driver's section, which sits directly on the hump.

I considered shaving the raised section, which would lower the seat (and require notching out the hump for the rear bracket) but decided against it for now. This would have given me the head clearance similar to the original bench seat. As it is, I now have about 2-1/2" of head room, but I'm extremely long-waisted.

*Piston* · 05-01-2003, 10:17 AM

Thanks for the "How-to" on these seats Fred. I think when I installed mine I went the lazy route lol. I just bolted it up and put a few spacers in

PM's sent to everyone.

**1971Stepside** · 05-01-2003, 11:06 AM

01 - 03 GMC/Chevy Pickup Bucket Seats.
Power 6 ways
Integrated seat belts (a must)
Prefer grey in color (leather or cloth fine)
Console not necessary, but would take one.

I can pick up at your place if necessary. Thanks!

Bill72BB · 05-01-2003, 02:08 PM

I would like to get a price on a Late model Silverado 60/40 seat with the fold down console in Tan/Beige .
Zip 90504

Fred T or Piston do you have any Pic of your install ?

ol skool 68 · 05-01-2003, 10:08 PM

i would also like to get pricing on buckets from a 01-03 fullsize..... console not a necessecity(sp?) but will take if i have to do so, standard seating power not needed but would like the integrated shoulder belts!! and grey would be my color of choice in cloth preferably.

i live in florida home zip is 32257.......but i work in a large warehouse where i can recieve and unload anything that comes off a tractor trailer hopefully will remember the zip there so i can post it tomorrow.........i only mentioned this because some place's price of shipping dramatically increases for the ease and access of a loading dock....?

thanx for your time-BBB-

SCOTI · 05-02-2003, 02:08 PM

Hey Piston, how about some factory 01-02 Dodge Ram single cab buckets (no integral seatbelts) in tan/beige or dark charcoal/black to 75041.

*Piston* · 05-02-2003, 02:28 PM

I'll check and PM you when I find out. I was thinking that most of them had the seatbelts built in though? I'll let you know asap..

Guys most of what I find is not the cheapest deal in town, all I'm offering is a place to get them when there are none to be found.

SCOTI · 05-02-2003, 04:06 PM

I can't seem to locate any locally from places I've called in the yellow pages so I figure it doesn't hurt to network & see what other options are out there.

The integral belts were optioned to extended cab trucks, the single cab models w/buckets got the separate floor mounted belts/sleeves.

Thanks

SCOTI · 05-03-2003, 08:45 PM

ttt

smoky02 · 01-24-2008, 08:43 PM

I would like a 99-present truck seat, grey with console and no electric adjustments. Can you help me out?

70GMCer · 01-24-2008, 09:01 PM

He's been suspended.....& that last post was 5/03

braybon · 06-23-2008, 11:50 PM

Quote:

Originally Posted by Piston

If you are looking for a late model seat, please post here so I can keep track of them. I have a source that is nation wide that supplies "used" seats in various condition. Most will be in "like new" condition meaning no defects/tears/stains. It really depends on what you would like to spend. They range anywhere from 100.00 to 350.00. Some with console some without, some with electric controls some without.

Post what you want a price on and I'll check for you. Whatever they cost me is what I'll charge.
In most cases there is NO SHIPPING! But I was told that they would drop ship them if the yard is close enough to you. All I can do is try on the shipping so post your zip and I'll check. Shipping will run 100.00 per seat though.
Also, I won't have pics until they are ordered, if you dont like the seat after I take the pic, I can send it back with no problem.
Only post if your ready to buy now though, I can't send a bunch of the seats back without them getting mad.

Colors are:
Tan / Red / Blue / Grey

Looking for gray leather buckets w/console from mid 90's tahoe, silverado, etc. $500.00 limit.
bsraybon@carolina.rr.com

**lawest** · 06-24-2008, 09:29 AM

89-96(?) Silverado bench with fold down arm rest/console. Integral belts/harnesses. Dark Grey leather or fabric. OKC area, 73089. Thanks

64GMCHorsepower · 06-24-2008, 10:18 AM

FYI guys.....

Quote:

Originally Posted by 70GMCer

He's been suspended.....& that last post was 5/03

airdale94 · 07-02-2008, 05:21 PM

93 C2500 strait bench, back&seat, grey cloth(twead).

**jamie72** · 07-02-2008, 05:22 PM

Quote:

Originally Posted by 64GMCHorsepower

FYI guys.....

one post up...

royo · 07-02-2008, 05:31 PM

WOW now thats an old post lol !!!!!!!!!!!!! GOOD IDEA thought

04-30-2003, 04:26 PM	#1
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,301	To those wanting late model SEATS: If you are looking for a late model seat, please post here so I can keep track of them. I have a source that is nation wide that supplies "used" seats in various condition. Most will be in "like new" condition meaning no defects/tears/stains. It really depends on what you would like to spend. They range anywhere from 100.00 to 350.00. Some with console some without, some with electric controls some without. Post what you want a price on and I'll check for you. Whatever they cost me is what I'll charge. In most cases there is NO SHIPPING! But I was told that they would drop ship them if the yard is close enough to you. All I can do is try on the shipping so post your zip and I'll check. Shipping will run 100.00 per seat though. Also, I won't have pics until they are ordered, if you dont like the seat after I take the pic, I can send it back with no problem. Only post if your ready to buy now though, I can't send a bunch of the seats back without them getting mad. Colors are: Tan / Red / Blue / Grey

04-30-2003, 05:42 PM	#2
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	ok Ill give it a shot 95-99 suburban/tahoe middle seat grey, cloth zip 94568 If nothing close to me then dont bother, dont want to deal with shipping. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

04-30-2003, 06:14 PM	#3
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	2000 Tahoe or similar seats. All three (both ends and center w/ console) Grey cloth w/ seat belts built in. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

04-30-2003, 06:24 PM	#4
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Would a GM pickup or Tahoe grey leather bench be available?? __________________ Stepsides look like real trucks! Smitty

05-01-2003, 01:07 AM	#7
LT 72 Jimmy Registered User Join Date: Sep 2002 Location: Arkansas Posts: 252	seats Iwould like to get a price on a 01-03 tahoe seat. I have a jimmy and want to have the built-in shoulder belt. I would prefer blue. thanks LT

04-30-2003, 06:24 PM	#5
69sixpackbee Registered User Join Date: Jan 2001 Location: Sabinal, Texas Posts: 1,706	Late model Silverado or Sub 60/40 cloth bench. Prefer gray but will dye a different one if need be. I am in the Pomona/Ontario Cal. area. (91767-91762)

04-30-2003, 08:33 PM	#6
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Would be interested in a 60/40 bench with flop down arm rest - console if such a thing exists. Blue. No ship but could pick up within reasonable distance. Zip is 40003

05-01-2003, 08:10 AM	#8
ozarkhippie Registered User Join Date: Nov 2002 Location: Eureka Springs AR Posts: 494	looking for a tan seat for my 89 gmc. I would like one with a fold down console-arm rest. But anything will beat what I have got in it now. __________________ Buy Sale or Trade 71 3/4 4x4 72 1/2 ton cheyenne 4x4 Last edited by ozarkhippie; 05-01-2003 at 08:13 AM.

05-01-2003, 10:09 AM	#9
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	For those of you wondering about installing the late model seats, I just finished with mine. Bought a 60/40 bench from Garrett that was out of a 98 Tahoe, which is actually two separate seats. I was able to use the holes on the front corners, drilling them out to 3/8". Had to make a bracket for the right front corner of the driver's section, due to differences in the hump. A piece of 1-1/4" angle will bolt to the bracket and sits on the raised section that runs from side to side. The hole in the bracket ends up actually forward of the other end, so I bolted angles to this that attached to the raised section and to the floor in front, which is about 1" lower. I then made 3/8" spacers for the rear attachments, with the exception of the right end of the driver's section, which sits directly on the hump. I considered shaving the raised section, which would lower the seat (and require notching out the hump for the rear bracket) but decided against it for now. This would have given me the head clearance similar to the original bench seat. As it is, I now have about 2-1/2" of head room, but I'm extremely long-waisted. __________________ Fred There is no such thing as too much cam...just not enough engine.

05-01-2003, 10:17 AM	#10
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,301	Thanks for the "How-to" on these seats Fred. I think when I installed mine I went the lazy route lol. I just bolted it up and put a few spacers in PM's sent to everyone.

05-01-2003, 11:06 AM	#11
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	01 - 03 GMC/Chevy Pickup Bucket Seats. Power 6 ways Integrated seat belts (a must) Prefer grey in color (leather or cloth fine) Console not necessary, but would take one. I can pick up at your place if necessary. Thanks! __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

05-01-2003, 02:08 PM	#12
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	I would like to get a price on a Late model Silverado 60/40 seat with the fold down console in Tan/Beige . Zip 90504 Fred T or Piston do you have any Pic of your install ? __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

05-01-2003, 10:08 PM	#13
ol skool 68 turnin wrenches Join Date: Dec 2002 Location: my garage Posts: 263	i would also like to get pricing on buckets from a 01-03 fullsize..... console not a necessecity(sp?) but will take if i have to do so, standard seating power not needed but would like the integrated shoulder belts!! and grey would be my color of choice in cloth preferably. i live in florida home zip is 32257.......but i work in a large warehouse where i can recieve and unload anything that comes off a tractor trailer hopefully will remember the zip there so i can post it tomorrow.........i only mentioned this because some place's price of shipping dramatically increases for the ease and access of a loading dock....? thanx for your time-BBB- __________________ "three can keep a secret if two are dead" -unknown hell's angel- D.M.C. -FF- 68 SWB full frame off (project ol skool) 2000 s-10 formally bagged but now my daily driver... Last edited by ol skool 68; 05-01-2003 at 10:13 PM.

05-02-2003, 02:08 PM	#14
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,984	Hey Piston, how about some factory 01-02 Dodge Ram single cab buckets (no integral seatbelts) in tan/beige or dark charcoal/black to 75041. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-02-2003, 02:28 PM	#15
Piston Account Suspended Join Date: Oct 2002 Location: Olathe, KS Posts: 2,301	I'll check and PM you when I find out. I was thinking that most of them had the seatbelts built in though? I'll let you know asap.. Guys most of what I find is not the cheapest deal in town, all I'm offering is a place to get them when there are none to be found.



Register or Log In To remove these advertisements.

05-02-2003, 04:06 PM	#16
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,984	I can't seem to locate any locally from places I've called in the yellow pages so I figure it doesn't hurt to network & see what other options are out there. The integral belts were optioned to extended cab trucks, the single cab models w/buckets got the separate floor mounted belts/sleeves. Thanks __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-03-2003, 08:45 PM	#17
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,984	ttt __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-24-2008, 08:43 PM	#18
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: To those wanting late model SEATS: I would like a 99-present truck seat, grey with console and no electric adjustments. Can you help me out? __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

01-24-2008, 09:01 PM	#19
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: To those wanting late model SEATS: He's been suspended.....& that last post was 5/03 __________________ 1997 GMC Sierra Ext 1965 Mustang

06-24-2008, 09:29 AM	#21
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: To those wanting late model SEATS: 89-96(?) Silverado bench with fold down arm rest/console. Integral belts/harnesses. Dark Grey leather or fabric. OKC area, 73089. Thanks __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

07-02-2008, 05:21 PM	#23
airdale94 Registered User Join Date: Jan 2007 Location: Topeka,KS Posts: 778	Re: To those wanting late model SEATS: 93 C2500 strait bench, back&seat, grey cloth(twead).

07-02-2008, 05:31 PM	#25
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: To those wanting late model SEATS: WOW now thats an old post lol !!!!!!!!!!!!! GOOD IDEA thought __________________ nickle and dime

Register or Log In To remove these advertisements.