IN Parting Out a 1967 Chevy C20 Small Back Window, Long Bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 02-18-2012, 11:36 PM

****** I have parts from this that are for sell ****** Edited 2-23-12

I parted out a 1967 Chevy C20 SBW Long bed. The frame and partial body is gone. It was a 4 speed truck but did not have an engine or transmission. I do not have the truck anymore just parts from it. The floor boards and bed were pretty rough. The trailing arms were so bad that one of them is broken.

The complete doghouse is pending sale locally.
The doors are sold complete locally.
The 4 speed steering column I am keeping for myself.

Here is some of what I see.

1: Steering wheel and horn button-- SOLD
2: Ignition spacer, used switch and lock cylinder incl. key-- SOLD
3: Glove box door w/ Spid label-- SOLD
4: Inside Mirror and arm, mirror is not clear-- $25.00 plus shipping
5: Cigarette lighter working condition unknown-- $10.00 plus shipping
6: Small block engine stands-- $20.00 plus shipping
7: High hump, 4 speed hole and the front is cut and bent up -- $20.00 plus shipping

Let me know what you see.

Post to the thread as per rules. Thanks for looking

**Todd68Chevy** · 02-18-2012, 11:39 PM

More pictures

**Todd68Chevy** · 02-18-2012, 11:43 PM

pictures.

**too much stuff** · 02-19-2012, 12:10 AM

Let me know on the steering box condition and price... Last e-mail didn't come through.
Eric

**Todd68Chevy** · 02-19-2012, 12:13 AM

Quote:

Originally Posted by too much stuff

Let me know on the steering box condition and price... Last e-mail didn't come through.
Eric

I will check it tomorrow. I hit the reply to soon. You should get another message. Thanks

coast2coast · 02-19-2012, 12:25 AM

Dashpad? And heater control?

**Todd68Chevy** · 02-19-2012, 12:32 AM

Quote:

Originally Posted by coast2coast

Dashpad? And heater control?

I know the dash pad is not good. The heater controls have the top lever broken off. I will check the rest of its condition tomorrow and see if I have another lever.

**zicc1835** · 02-19-2012, 12:42 AM

ill take the grill let me know the ship to 07981

timzrides · 02-19-2012, 12:46 AM

I'll take steering wheel. PM me payment info. PO money order would work best.

thanks,

tim

MadnessBigBlock · 02-19-2012, 12:48 AM

Seat belts shipped to 58265 thanks
Posted via Mobile Device

MadnessBigBlock · 02-19-2012, 12:51 AM

Also price on:
Hubcaps
Guage cluster
Choke cable
Posted via Mobile Device

**Todd68Chevy** · 02-19-2012, 12:54 AM

Quote:

Originally Posted by zicc1835

ill take the grill let me know the ship to 07981

As stated above the doghouse (grille, fenders and core support) on this truck is being looked at locally and I am waiting on an answer before they will be available. I do have a couple other 67-68 grilles I can get pictures and prices on. I do not think I have any of the hoops/ trim. I will check and let you know. Thanks, Todd

Quote:

Originally Posted by timzrides

I'll take steering wheel. PM me payment info. PO money order would work best.

thanks,

tim

I will get it off tomorrow and get better pictures and shipping price. I will PM my payment information after that. What is your zip code so I can figure a shipping quote? Thanks, Todd

Quote:

Originally Posted by MadnessBigBlock

Seat belts shipped to 58265 thanks
Posted via Mobile Device

I will get them out and better pictures. Thanks, Todd

**Todd68Chevy** · 02-19-2012, 12:56 AM

Quote:

Originally Posted by MadnessBigBlock

Also price on:
Hubcaps
Guage cluster
Choke cable
Posted via Mobile Device

There is only 3 hub caps but I will check them out. Gauge cluster does have some cracks at the screw holes. I will check out better. Thanks

Delta9 · 02-19-2012, 12:57 AM

how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

Delta9 · 02-19-2012, 01:02 AM

how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. i wont have my truck till the end of May if u want the trade. (as long as the 67 front clip is not destroyed)

Delta9 · 02-19-2012, 01:03 AM

sry my pics are not goin through

**Todd68Chevy** · 02-19-2012, 01:06 AM

Quote:

Originally Posted by Delta9

how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

I might have this front clip sold locally but If it does not go through I will put it up for sale. The grille is real good, fenders are decent, the rear bottom is rusted and the back side of the front cup is rusted, the outside looks pretty good. The core support looks real good on the left side but the right side has some rust. The grille hoops and headlight bezels are painted but look real nice. Wiring harness even looks good. I have not looked the hood over real good but it looks like it is not rusted along the edge but does have some bondo filling a dent. I will let you know if the local sale does not go thru. Be safe over there and thanks for all you do.

Meatman · 02-19-2012, 01:28 AM

C20 badges shipped to 66614?

shawno72 · 02-19-2012, 01:56 AM

Hey Todd I am looking for a nice lower steel grille hoop, do you have one and how much shipped to 95242? Thank you.
Posted via Mobile Device

Delta9 · 02-19-2012, 02:05 AM

ok thnx just let me know how much or if u want to do a trade+cash deal i would like pics of the (problem areas if you dont mind.
Thnx again
Ken

duallyjams · 02-19-2012, 09:17 AM

What size are the rims ? are all 4 a match with clips for the hub caps.

**Todd68Chevy** · 02-19-2012, 10:37 PM

Well I got it pretty much apart today. I will be getting rid of what is let sometime this week so if you see something you need let me know. Here are some pictures of what is left. The cab and bed are rough.

I will catching up on prices and shipping so if you posted check the following threads.

The roof and back window area looks good but a little rust starting at the top of the windshield on the inside $75.00 no shipping-- does anybody need that?

**Todd68Chevy** · 02-19-2012, 10:50 PM

Quote:

Originally Posted by too much stuff

Let me know on the steering box condition and price... Last e-mail didn't come through.
Eric

The box looks ok and the steering actually felt pretty tight. Looks like the box and pitman arm should fit in a Flat Rate box so $35.00 Shipped.

**Todd68Chevy** · 02-19-2012, 10:55 PM

Quote:

Originally Posted by coast2coast

Dashpad? And heater control?

Like I stated before the dash pad is not good. The heater controls also has a few issues. The top lever is broken and I do not have another one at this time, the mounting hole threads are messed up and they had a bolt all the way thru with a nut on top- it worked but just not right, and one of the rivets that hold the front and back together has the head broken off. If you are still interested I would take $20.00 shipped for it.

**Todd68Chevy** · 02-19-2012, 11:06 PM

Quote:

Originally Posted by timzrides

I'll take steering wheel. PM me payment info. PO money order would work best.

thanks,

tim

Tim, here are some close up pictures. The shipping will be $10.00 so that will be a total of $35.00. If you are interested in meeting me next Saturday morning, I have a trip in the works to come over to Decatur, IL and Springfield, IL and I could just bring it with me.

02-18-2012, 11:36 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Parting Out a 1967 Chevy C20 Small Back Window, Long Bed **** I have parts from this that are for sell **** Edited 2-23-12 I parted out a 1967 Chevy C20 SBW Long bed. The frame and partial body is gone. It was a 4 speed truck but did not have an engine or transmission. I do not have the truck anymore just parts from it. The floor boards and bed were pretty rough. The trailing arms were so bad that one of them is broken. The complete doghouse is pending sale locally. The doors are sold complete locally. The 4 speed steering column I am keeping for myself. Here is some of what I see. 1: Steering wheel and horn button-- SOLD 2: Ignition spacer, used switch and lock cylinder incl. key-- SOLD 3: Glove box door w/ Spid label-- SOLD 4: Inside Mirror and arm, mirror is not clear-- $25.00 plus shipping 5: Cigarette lighter working condition unknown-- $10.00 plus shipping 6: Small block engine stands-- $20.00 plus shipping 7: High hump, 4 speed hole and the front is cut and bent up -- $20.00 plus shipping Let me know what you see. Post to the thread as per rules. Thanks for looking Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 04-28-2012 at 08:39 AM. Reason: Items sold

02-18-2012, 11:39 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed More pictures Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

02-18-2012, 11:43 PM	#3
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

02-19-2012, 12:10 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,852	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Let me know on the steering box condition and price... Last e-mail didn't come through. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-19-2012, 12:25 AM	#6
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Dashpad? And heater control?

02-19-2012, 12:42 AM	#8
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,398	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed ill take the grill let me know the ship to 07981 __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

02-19-2012, 12:46 AM	#9
timzrides Registered User Join Date: Jan 2007 Location: Illinois Posts: 351	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed I'll take steering wheel. PM me payment info. PO money order would work best. thanks, tim

02-19-2012, 12:48 AM	#10
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Seat belts shipped to 58265 thanks Posted via Mobile Device

02-19-2012, 12:51 AM	#11
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Also price on: Hubcaps Guage cluster Choke cable Posted via Mobile Device

02-19-2012, 12:57 AM	#14
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

02-19-2012, 01:02 AM	#15
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. i wont have my truck till the end of May if u want the trade. (as long as the 67 front clip is not destroyed)

02-19-2012, 01:03 AM	#16
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed sry my pics are not goin through

02-19-2012, 01:28 AM	#18
Meatman Registered User Join Date: Sep 2004 Location: Topeka, Ks Posts: 604	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed C20 badges shipped to 66614? __________________ Daily-94 K2500 350 5spd extended cab longbox Project Red Velvet-68 C20 396-th400-AC-PS-PB-all original except for the 8 track and the gun rack. Build thread>>>>http://67-72chevytrucks.com/vboard/s...d.php?t=495881 My 01 TA and 88 Formula hide in the garage. :-)

02-19-2012, 01:56 AM	#19
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,094	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Hey Todd I am looking for a nice lower steel grille hoop, do you have one and how much shipped to 95242? Thank you. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-19-2012, 02:05 AM	#20
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed ok thnx just let me know how much or if u want to do a trade+cash deal i would like pics of the (problem areas if you dont mind. Thnx again Ken



Register or Log In To remove these advertisements.

02-19-2012, 09:17 AM	#21
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed What size are the rims ? are all 4 a match with clips for the hub caps. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

02-19-2012, 10:37 PM	#22
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed Well I got it pretty much apart today. I will be getting rid of what is let sometime this week so if you see something you need let me know. Here are some pictures of what is left. The cab and bed are rough. I will catching up on prices and shipping so if you posted check the following threads. The roof and back window area looks good but a little rust starting at the top of the windshield on the inside $75.00 no shipping-- does anybody need that? Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

Register or Log In To remove these advertisements.